Gamma ray bursts: Short vs. long

Short and long GRBs are thought to be two distinct classes based on their different duration and spectrum. Through the spectral analysis of two similarly selected samples of BATSE short and long GRBs, we show that short GRBs are harder than long events, confirming what found from the comparison of their hardness ratio. However, this spectral diversity seems to be due to a harder low energy spectral component of short GRBs, rather than a (slightly higher) peak energy. Interestingly short GRBs have a spectrum which is similar to the spectrum of the emission of the first 1–2 s of long events. We find evidence that short GRBs are inconsistent with the E_peak–E_iso correlation defined by long bursts while they follow the same E_peak–L_iso correlation of long GRBs. These results, coupled to the similar variability timescale of short events and the first seconds of long ones, suggest that a common (or similar) dissipation mechanism could operate in both classes. The difference in the duration would then be due mainly to the central engine lifetime.     

OSIRIS-REx low-velocity particles during outbound cruise

We analyzed high-angular rate streaks first recorded by OSIRIS-REx’s MapCam during a 2017 search for Earth Trojan asteroids. We interpret them as water-ice particles that translated across the imager’s field of view, originating from the spacecraft itself. Their translation velocities approximated 0.1–1?m/s based on reasonable conclusions about their range. Pursuing several lines of investigation to seek a coherent hypothesis, we conclude that the episodic releases of the water ice particles are associated with spacecraft attitudes that resulted in solar illumination of previously shadowed regions. This correlation suggests that the OSIRIS-REx spacecraft itself possesses micro-climatic zones consisting of hot regions and cold traps that may temporarily potentially pass volatiles back and forth before losing most of them.     

单推力航天器交会对接轨迹规划及跟踪控制

针对单推力航天器交会对接问题，提出一种轨迹规划及跟踪算法。首先，考虑到追踪航天器只沿本体X轴安装推力器，且推力方向固定，为了实现从起始位置转移至期望位置并满足姿态要求，基于三维螺旋线设计两阶段转移轨迹，根据初末位置以及末端速度方向要求，求解螺旋线参数。该螺旋线可以保证在初末速度方向固定情况下，曲率积分最小。其次，为了降低轨迹跟踪难度并减小初始时刻的位置跟踪控制力，需要将转移轨迹初始速度与追踪星X轴重合。传统螺旋线无法满足该约束条件。本文对传统螺旋线进行改进，提出一种旋转螺旋线轨迹设计方法。通过引入姿态旋转矩阵，将螺旋线在三维空间旋转，在不改变曲线形状的前提下满足初末位置及速度方向要求。然后，为了跟踪转移轨迹以及跟踪期望推力方向，提出基于CLF（Control Lyapunov Function）的滑模控制策略，当追踪星X轴与期望推力方向夹角较大时，采用CLF，保证最优性；当姿态误差收敛至滑模面附近时，切换为滑模控制，以提升系统鲁棒性。最后，通过仿真验证旋转螺旋线相比于传统螺旋线的优势。     

Modeling visuospatial reasoning

I apply my proposed modification of Soar/Spatial/Visual System and Kosslyn’s (1983) computational operations on images to problems within a 2 × 2 taxonomy that classifies research according to whether the coding involves static or dynamic relations within an object or between objects (Newcombe & Shipley, 2015). I then repeat this analysis for problems that are included in mathematics and science curricula. Because many of these problems involve reasoning from diagrams Hegarty’s (2011) framework for reasoning from visual-spatial displays provides additional support for organizing this topic. Two more relevant frameworks specify reasoning at different levels of abstraction (Reed, 2016) and with different combinations of actions and objects (Reed, 2018). The article concludes with suggestions for future directions.     

Multi-criteria analysis of high-altitude UAV concepts

In this paper, we consider an example of estimating and comparing the efficiency of different concepts for a high-altitude unmanned aerial vehicle (UAV) under diversity of efficiency criteria.     

Dynamics of a discretely reinforced cylindrical shell under live load

This study proposes an approximate solution to a contact problem of dynamic deformation of a cyclically symmetrical discretely ring-stiffened cylindrical shell, the side surface of which is subjected to an evenly distributed inertia live load. The solution of the problem assumes the quasistatic mode of deformation of the structure. Several critical velocities of the live load have been found. A number of examples are presented.     

Multi-criteria analysis of aircraft structures fracture

A novel modular multistep algorithm is proposed for multi-criteria analysis of fracture of aircraft structures with complex geometries. In order to evaluate the algorithm, the crack growth analysis is realized by the following three criteria, namely, the stress intensity factor, the strain energy release rate, and the J-integral. The algorithm implementation by the finite element method is considered and prospects of alternative implementation based on the meshfree methods are assigned.