航电系统并行检测过程与检测设备解耦方法

航电系统在使用或升级改造过程中进行可靠性检测是必不可少的。特别是在当前批量航电系统大量投入使用的背景下，迫切需要能高效、快速、准确地对系统进行可靠性检测。由于航电系统安全性要求高，内置检测软件受限，需要外置检测设备通过航电系统指定接口进行检测，检测过程也不允许出现任何泄露等行为。检测设备与具体航电系统耦合，检测过程与具体检测设备耦合，难以实现批量航电系统并行检测。为此，通过引入逻辑检测设备，给出了一种航电系统并行检测分层框架，解决检测设备与被测系统耦合的问题，同时也保证了检测的安全性。通过逻辑检测设备、检测跳转机和被测主机上检测行为的描述，给出了一种面向通用航电系统并行检测的检测设备协同机制，解决检测过程与检测设备耦合的问题，从而支持多个航电系统并行检测。最后，实现了一个通用航电系统并行检测系统，并通过实际应用和实验对比验证所提方法的有效性。     

宾馆火灾风险评估初探

在分析宾馆火灾发生原因的基础上,建立了宾馆火灾危险性、火灾损失评估因素集,并运用模糊评价法对宾馆的火灾安全进行风险性和损失评价,通过评价得出建筑物所属的安全等级,从而为宾馆实施安全管理提供方向和依据。该方法的建立可用于保险公司对投保建筑的鉴别与筛选,同时也可使管理者根据该评估方法及时采取防火安全措施,以降低火灾危险性,减少火灾损失。     

GPS共视技术中不确定度分析

介绍了使用同源共视技术进行频率校准的基本原理,在此基础上分析和评定了共视技术引入的不确定度。共视技术中不确定度主要是由参考原子钟的频率准确度、两地接收系统的不确定度、卫星的位置误差、接收天线的位置误差所构成。经过计算评定,在所有的影响不确定度的因素中,参考原子钟的频率准确度最为重要。     

DBV-RCS中一种提高时延性能的时隙分配方法(英文)

在DVB-RCS卫星通信中,为某个业务分配的时隙在MF-TDMA帧中的位置分布将影响该业务的时延特性。本文分别针对固定速率和实时可变速率业务,对MF-TDMA的帧长度、终端分配的时隙数量及位置分布与业务时延性能之间的关系进行了建模分析。理论分析表明时隙位置是影响业务时延的一个重要因素,位置分布越均匀,越能提高业务的时延性能;时隙均匀分配相比传统的时隙连续分配可以有效降低业务平均时延,且时延不随帧长的变化而变化;在时隙均匀分配方式下,提高实时可变速率业务的带宽分配可以更有效的提高时延性能。在DVB-RCS标准基础上,提出了一种与标准完全兼容的时隙均匀分配方法(TUAM),通过计算机仿真验证了算法的有效性以及建模分析的正确性,该算法可有效地保证业务具有极低的平均时延和时延抖动,使得VoIP等实时业务不会由于端到端时延过大而丢包,提高了DVB-RCS系统对于实时业务QoS的保障能力。     

伪随机时钟激励模块设计研究及应用

随着现场可编程逻辑器件（Field Programmable Gate Array，FPGA）验证水平的逐渐提高，对于测试平台（Testbench）中产生的时钟激励也提出越来越高的要求。目前，在Testbench中使用的时钟激励模块都是具有固定周期和固定占空比的激励信号，然而在现实条件下，时钟沿都具有一定的抖动，从而影响到时钟的占空比及瞬时频率。为了模拟时钟的这种实际特性，文章提出了一种基于伪随机算法实现的沿跳变的时钟激励模块，并将该模块用于高速计数器设计的实现验证，取得较好的验证效果。     

回火温度对离心铸造碳钢-高铬铸铁复合管组织及硬度的影响

采用离心铸造技术制备碳钢-高铬铸铁双金属复合管,研究回火温度对其组织及硬度的影响。研究结果表明:在350℃×3.5 h+450℃×3.5 h回火下,高铬铸铁组织中的碳化物能弥散分布在基体中,其硬度值为HV709,20钢硬度为HV130.6,界面附近的硬度值变化较平缓。     

Simulation study on slant-to-vertical deviation in two dimensional TEC mapping over the ionosphere equatorial anomaly

With the rapid increase of GPS/GNSS receivers being deployed and operated in China, real-time GPS data from nearly a thousand sites are available at the National Center for Space Weather, China Meteorology Administration. However, it is challenging to generate a high-quality regional total electron content (TEC) map with the traditional two-dimensional (2-D) retrieval scheme because a large horizontal gradient has been reported over east–south Asia due to the northern equatorial ionization anomaly. We developed an Ionosphere Data Assimilation Analysis System (IDAAS), which is described in this study, using an International Reference Ionosphere (IRI) model as the background and applying a Kalman filter for updated observations. The IDAAS can reconstruct a three-dimensional ionosphere with the GPS slant TEC. The inverse slant TEC correlates well with observations both for GPS sites involved in the reconstruction and sites that are not involved. Based on the IDAAS, simulations were performed to investigate the deviation relative to the slant-to-vertical conversion (STV). The results indicate that the relative deviation induced by slant-to-vertical conversion may be significant in certain instances, and the deviation varies from 0% to 40% when the elevation decreases from 90° to 15°, while the relative IDAAS deviation is much smaller and varies from −5% to 15% without an elevation dependence. Compared with ‘true TEC’ map derived from the model, there is large difference in STV TEC map but no obvious discrepancy in IDAAS map. Generally, the IDAAS TEC map is much closer to the “true TEC” than is STV TEC map is.     

高校“思想道德修养与法律基础”课立体实践教学模式探究

高校"思想道德修养与法律基础"课以提高大学生思想境界、道德水平和法律常识为教学目标,但日常教学中重视理论讲授,实践教学不足。通过课堂、校园、社会、网络等途径,试图建立"思想道德修养与法律基础"课的立体实践教学模式,以期对改变实践教学薄弱的现状有所参考和借鉴。     

TS-InSAR analysis for monitoring ground deformation in Lanzhou New District,the loess Plateau of China,from 2017 to 2019

Large-scale land creation projects involving the cutting of mountains to infill gullies for construction have been carried out in Lanzhou New District (LZND). However, there is an urgent need for comprehensive and detailed research on the spatiotemporal evolution of ground deformation in LZND. Based on Sentinel-1A SAR data, combined with the urban geological background, the ground deformation in LZND from 2017 to 2019 was analysed. Two independent, multi-temporal techniques, persistent scatterers interferometry (PS-InSAR) and the small baseline subset (SBAS-InSAR), were used to calculate the deformation time series, and the results were cross-verified. The time series-monitoring results of the SBAS and PS calculations exhibited strong consistency in LZND and verified the high reliability of the experimental results. The results showed the whole surface of the LZND from March 2017 to October 2019 maintained stability, and the deformation rate was primarily in the range of ?10 to 10 mm/year. However, ground deformation in the Xicha area was evident. The maximum annual deformation rates monitored by SBAS-InSAR and PS-InSAR were ?52.48 mm/year and ?56.35 mm/year, respectively. The most typical deformation areas include the built-up area and the land creation area. The surface subsidence area was concentrated in the filling area. The ground deformation range of LZND kept expanding and accelerating from 2017 to 2019. Land creation, urban construction, geology and precipitation were the primary factors contributing to local severe ground deformation. The results of this study provide reference for the regional urban planning in LZND.