涂层硬质合金刀具加工镍基合金的应用

本文在对镍基合金进行系统车削实验基础上，研究了多种先进硬质合金刀片的切削性能。并对涂层硬质合金刀片独特的优良性能进行了论述。文中从抗磨料磨损、抗扩散磨损及抗氧化磨损几方面，对涂层刀具的切削机理进行了分析研究。     

不同氧化剂对丁羟(HTPB)推进剂老化性能影响的研究

本文研究了不同氧化剂对丁羟(HTPB)推进剂老化性能的影响.实验结果表明:随着推进剂老化时间的延长,最大拉伸强度增加,伸长率降低,邵氏硬度升高,失重百分数略有下降,而相对交联密度也上升.由此可以得出结论:热稳定的、产物氧化性弱的氧化剂,对于提高丁羟推进剂的老化性能是有益的.本文进一步用热重分析方法和红外光谱法对上述结果作了验证,并对丁羟推进剂的老化机理进行了初步探讨.     

倾转旋翼机短舱倾转机构动力学仿真分析

研究倾转旋翼机短舱倾转机构在短舱从固定翼模式运动到直升机模式过程中的动力学特性具有重要的意义.在短舱倾转机构传力分析及运动学分析的基础上,应用LMS Motion建立了短舱倾转机构多体动力学仿真模型,定义短舱倾转机构的各构件及其属性,创建各构件之间的运动副,定义运动机构驱动,创建外力和力矩以模拟真实的工况,得到并分析短舱和丝杠的主要运动参数曲线以及机构主交点的受力变化情况.结果表明:丝杠与短舱连接点处作用力随短舱的仰角增大先减小再增大,短舱与机翼支点处作用力随着短舱的仰角增大而逐渐增大.研究结果可为倾转旋翼机短舱倾转机构的参数确定提供参考.     

Structure and kinetic properties of slow-mode shocks associated with magnetic reconnection in the near-Earth magnetotail

We study the structure and kinetic properties of slow-mode shocks near the plasma sheet boundary layer (PSBL) associated with magnetic reconnection by Cluster observation. The presence of slow-mode shocks is confirmed by traditional Rankine–Hugoniot (RH) analysis and Monte-Carlo shock fitting method. The Walén analysis, applied to the tailward flow associated with slow-mode shocks, also supports that plasma was accelerated across a Petschek-type slow-mode shock connected to the diffusion region. Back-streaming ions were observed on the shock layer, and cold ions were accelerated and heated by slow-mode shocks. In addition, whistler and electrostatic solitary waves were observed around the slow-mode shocks. These waves might be excited by the observed field-aligned electron beams near the shocks.     

J2级经纬仪竖盘指标自动补偿误差不确定度

介绍了按照ＪＪＧ４１４—９４《光学经纬仪》检定、校准Ｊ２级经纬仪竖盘指标自动补偿误差时，依据“’９３国际指南”要求，对其测量不确定度进行的分析、计算。     

Optimum parameter matching obtained by experiments for coring drilling into lunar simulant

This paper performs a series of ground experiments (on the Earth) to obtain optimum parameter matching for a future core drill on the Moon. Three common stages, I, II, III, are recognized with respect to the cut per revolution (CPR), which is defined as the ratio between the feeding speed and the rotating speed. The optimum matching between the feeding speed and the rotating speed for drills locates at the boundary position between Stage II and Stage III, where the coring rate saturates and the weight on the bit and the driving torque are still low. Further data analysis of the ground experiments reveals that the optimum matching signifies a proportional relation between the maximum conveying rate (MCR) by the groove of the auger and its rotating speed. The kinetic analysis in an ideal condition without gravity, the friction from the auger groove and the pressure at the bit confirm a similar proportion. The correlation between the proportions needs further study to determine whether the optimum matching obtained on the ground can be directly applied to future drills on the Moon.     

亚跨超CFD软件平台研制

亚跨ＣＦＤ软件平台研制的宗旨是综合国内外计算流体动力学的最新研究成果，用计算机软件技术的新发展，建立一个面向对象的计算流体动力学的研究开发环境，加快计算流体动力学最新成果向工程应用的转换速度。本文介绍初级版本的研究进展和研究成果，主要匝数值网格生成技术，流场解算器，面向对象的界面设计等三部分组成。     

The Voyager mission Photopolarimeter Experiment

The Voyager Photopolarimeter Experiment is designed to determine the physical properties of particulate matter in the atmospheres of Jupiter, Saturn, and the Rings of Saturn by measuring the intensity and linear polarization of scattered sunlight at eight wavelengths in the 2350–7500 Å region of the spectrum. The experiment will also provide information on the texture and probable composition of the surfaces of the satellites of Jupiter and Saturn and the properties of the sodium cloud around Io. During the planetary encounters a search for optical evidence of electrical discharges (lightning) and auroral activity will also be conducted.     

基于集成学习模型的飞行学员认知负荷研究

在飞行过程中,飞行员需要在短时间内接收大量信息,并做出正确的判断与决策,而过高的认知负荷会影响其感知、判断、决策等认知过程,进而影响飞行安全。首先通过飞行模拟实验获取飞行学员在执行不同飞行任务时的生理数据;然后通过时域、频域分析等方法提取呼吸和心电信号的特征,并通过统计学方法筛选出能够反映认知负荷水平的指标;最后结合支持向量机、K 最邻近、人工神经网络等方法建立集成学习模型,对飞行学员的认知负荷进行评估,并与单一算法进行对比。结果表明：本文建立的集成学习模型具有较高的准确率,能够更好地反映飞行学员认知负荷水平。     

空间碎片防护研究最新进展

空间碎片对在轨航天器的安全运行构成了严重威胁,对航天器的撞击事件频繁发生。随着空间碎片环境的日趋恶化,航天器的防护变得越来越重要。文章从空间碎片环境模型、撞击风险评估、航天器部件损伤、防护材料与结构的超高速撞击试验、撞击试验数据库建设、超高速发射设备、在轨撞击感知、机构间超高速发射设备交叉校验等方面对国内外空间碎片防护研究的进展进行了总结,并在此基础上给出我国未来空间碎片防护研究的发展建议。