利用格壁安装角对栅格舵展开折叠压心控制的工程方法研究探索

随着技术的发展，在工程设计中，对于巡航迎角下栅格舵导弹的展开与折叠的压心变化控制对于控制系统来说尤为重要。本文创新性的首次提出利用栅格舵的内壁单元的偏转，即相对于水平面的夹角来实现在设计点下的压心控制。由于设计过程需要多次迭代，本文利用计算在所关注的设计点处对展开折叠压心进行了验证，创造性的利用了等效代替的方法提出了一种新型的计算折叠状态压心的快速工程方法。     

STK三维模型制作与优化方法研究

为建立逼真的三维模型,在STK(卫星工具包)软件中进行任务仿真,讨论了直接获取mdl格式模型、编写mdl文件、转换模型等3种STK模型制作方法,并对这几种制作方法的优缺点进行了分析。针对不同制作方法带来的模型问题,重点探讨了组件层次调整、形状修改、显示效果优化、动作关节优化、特效设置等5种mdl格式模型优化方法。通过实例说明5种优化方法的优化效果,结果表明相关方法能有效地优化模型。     

Envelope protection for aircraft encountering upset condition based on dynamic envelope enlargement

Upset condition encountered by an aircraft in flight could pose great threat to flight safety, which is of chief importance in civil aviation. The causal factors have the nonlinear and multiple characteristics, and as a result the conventional envelope protection system cannot successfully do with the condition. So dynamic envelope based on differential manifold theory, which can take more coupling factors into account, is proposed as a basis to design a novel envelope protection system. Then the relationship between the dynamic envelope and the control coefficient or pilot command is obtained, and the result shows that the dynamic envelope can be enlarged with the change of control coefficient. Furthermore, quantification of flight security is realized via defining relative distance between flight state and dynamic envelope, which can detect whether there is a risk for an aircraft in flight. Finally, an envelope protection system based on dynamic envelope enlargement is proposed on the basis. NASA’s Generic Transport Model encountering hazard gust wind in climbing phase is taken as an example to verify the system’s feasibility. The result shows that the system can give a better operation encountering upset condition and to a certain extent reduce the number of accidents or incidents.     

Al—7%Si合金综合处理及其力学性能的研究

在有效的熔体处理基础上，对Al-Si合金进行适当的微合金化处理，可明显提高Al-Si合金的力学性能，本文通过对Al-7%Si合金精炼，细化，变质处理后，加入Mg,Zr ,V等元素，使合金力学性能大幅度提高。     

Single track and single layer formation in selective laser melting of niobium solid solution alloy

Selective laser melting (SLM) was employed to fabricate Nb-37Ti-13Cr-2Al-1Si (at%) alloy, using pre-alloyed powders prepared by plasma rotating electrode processing (PREP). A series of single tracks and single layers under different processing parameters was manufactured to evaluate the processing feasibility by SLM, including laser power, scanning speed, and hatch distance. Results showed that continuous single tracks could be fabricated using proper laser powers and scanning velocities. Both the width of a single track and its penetration depth into a substrate increased with an increase of the linear laser beam energy density (LED), i.e., an increase of the laser power and a decrease of the scanning speed. Nb, Ti, Si, Cr, and Al elements distributed heterogeneously over the melt pool in the form of swirl-like patterns. An excess of the hatch distance was not able to interconnect neighboring tracks. Under improper processing parameters, a balling phenomenon occurred, but could be eliminated with an increased LED. This work testified the SLM-processing feasibility of Nb-based alloy and promoted the application of SLM to the manufacture of niobium-based alloys.     

燃烧室声学测量和仿真的误差影响因素分析

动态压力数据对于燃烧室声学特性及燃烧不稳定性的分析具有十分重要的意义,由于测点数量有限,实际工程分析中还需要借助声学仿真补充模态分布及频响曲线等多维信息。某些情况下,主次模态频率间隔较小、主模态幅值不太突出,声学测量和仿真之间的误差会严重影响对实际声模态类型的判断。通过燃气发生器缩尺件声学实验及仿真计算,具体分析了在燃烧室声学特性分析过程中的各种误差源,其中包括测量点位置、来流温度、喷注及测量缩进小腔等。研究表明:声学仿真能够准确得到实际的声学模态频率分布,平均温度引起的频率差异不可忽略,非波腹位置处测量的模态幅值需要考虑测点位置的影响,喷注缩进小腔能使特定模态幅值降低,而测量缩进小腔会导致某阶模态幅值的测量结果偏高。     

航空发动机机载健康管理系统设计方法

为解决航空发动机机载健康管理系统正向设计流程不清晰、设计需求不明确、需求设计对应及追溯不规范的问题，在对 比国内外现有健康管理功能架构体系的基础上，结合正向设计中需求捕获、需求分析和功能分配，研究了由上到下的航空发动机 健康管理系统正向设计基本流程，开发了航空发动机健康管理正向设计流程平台，实现了机载功能架构的设计。引入基于模型的 系统工程思想，采用面向对象的工程设计思路，建立功能目标量化、功能描述、模块定义等图形化设计方法，验证了该设计方法在 硬件设计中的可用性。通过研究航空发动机机载健康管理系统设计方法并分析机载功能组成，建立了可扩展的流程平台，基于模 型设计方法建立了可用的硬件设计模型，可为航空发动机机载健康管理系统设计提供参考。     

基于遗传算法的多航班超售策略研究

研究航空公司在一个航段上每天有多个航班的机票超售问题,以多个航班总的期望收益最大化为目标函数,建立了旅客到达率服从二项分布的多航班超售模型.并运用遗传算法,通过编写选择、交叉、变异函数,调用Matlab工具葙求解模型.以国内某航空公司北京一上海航线为例,分别求解了单一票价、航班座位数相同及多种票价、航班座位数和旅客到达率不同的航班最优超售量,为航空公司多航班的超售提供了依据.     

ATC3在管制员模拟培训中的应用分析

民航的快速发展对管制员的数量和质量都提出了很高的要求,但管制模拟机设备的不足限制了民航院校的管制员培训与培养.通过详细研究管制模拟软件ATC3,并与目前使用的管制模拟机进行对比分析,探讨其创新性及优缺点,进而研究在管制员模拟机培训中的可应用性.同时也针对该软件的缺点提出了一些优化建议,以使该软件很好地应用在管制员模拟培训中,提高管制培训的质量,加快管制员培训的步伐,满足中国民航发展的迫切需求.     

Lateral Flight Technical Error Estimation Model for Performance Based Navigation

Flight technical error (FTE) combined with navigation system error (NSE) is the main part of total system error (TSE) in performance based navigation (PBN).The implementation of PBN requires pre-flight prediction and en-route short-term dynamical prediction of the TSE.Once the sum of predicted lateral FTE and NSE is greater than the specified PBN value,the PBN cannot operate.Thus,accurate modeling and thorough analysis of lateral FTE are indispensible.Multiple-input multiple-output (MIMO) lateral track control system of a transport aircraft is designed using linear quadratic Gaussian and loop transfer recovery (LQG/LTR) method,and the lateral FTE of a turbulence disturbed approach operation is analyzed.The error estimation mapping function of latera FTE and its bound estimation algorithm are proposed based on singular value theory.According to the forming mechanism of lateral FTE,the algorithm considers environmental turbulence fluctuation disturbance,aircraft dynamics and control system parameters.Real-data-based Monte-Carlo simulation validates the theoretical analysis of FTE.It also shows that FTE is mainly caused by turbulence fluctuation disturbance when automatic flight control system (AFCS) is engaged and would increase with escalating environmental turbulence intensity.