填加造孔剂法制备泡沫铝及其吸能性能

以尿素为造孔剂,采用填加造孔剂法制备泡沫铝,系统研究了成型烧结温度、孔隙率和孔径大小对泡沫铝吸能性能的影响,在此过程中采用电子万能试验机和数字图像相关(DIC)技术同步测试分析。结果表明:填加造孔剂法可以良好的控制泡沫铝的孔隙率和孔径;泡沫铝的最佳成型烧结温度为650℃,在此温度下,泡沫铝的压缩屈服强度达到10.7 MPa;随着孔隙率的降低,泡沫铝的屈服强度和平台应力逐渐提高,材料吸能性能有显著增强;当孔径小于2.0 mm时,随着孔径的增大,材料的吸能性能小幅提高。DIC技术可以直观的表征泡沫材料力学行为,具有良好的工程应用前景。     

飞翼模型高速风洞PIV试验研究

对小展弦比飞翼标模在2.4米跨声速风洞中创新开展了PIV试验。对空风洞进行了测速校核,并对小展弦比飞翼标模开展了二维、三维涡迹PIV测试,试验马赫数为0.4~0.9。测试结果表明,2.4m风洞PIV试验数据具有较高的准确度,M≤0.8时空风洞测速结果与理论值相差不超过1%,M=0.9时相差不超过2%。小展弦比飞翼标模测试结果显示,M数增大使机翼尾涡涡量和切向速度增大,涡核向内展向方向移动。前缘涡与上翼面分离具有密切关系:当M=0.8、α≤12°时,翼梢测试截面的前缘涡尚未破裂,上翼面未发生显著的流动分离;当α≥13°时,前缘涡破碎时机提前,当地后1/2弦长区域产生了比较明显的流动分离。     

非对称变翼飞行器复合控制系统设计

针对非对称变翼飞行器的姿态控制问题，提出了一种复合控制系统的设计方法。基于非对称变翼的姿态动力学模型，将变翼作为一种主动控制方式，提出了非对称变翼的使用条件，并采用逻辑函数设计了气动舵和变翼的复合控制分配策略。利用扩张干扰观测器估计了变翼过程中的扰动，采用全局滑动模态的变结构控制方法，设计了姿态复合控制系统，抑制了变形过程中参数的剧烈变化和变形引起的附加扰动。通过仿真，一方面与固定翼飞行器对比，校验了非对称变翼控制的有效性；另一方面通过气动数据的正负拉偏，验证了控制器对气动参数的摄动有良好的鲁棒性。     

共轴刚性旋翼飞行器配平特性及验证

针对共轴刚性旋 翼与常规旋翼的区别，从挥舞运动、变距操纵和诱导速度3方面建立共轴刚性旋翼的气动力模型。采用等效挥舞运动概念，建立共轴刚性旋翼的挥舞运动方程;引入提前操纵角概念，建立与共轴刚性旋翼挥舞频率相适应的变距操纵模型；引入上下旋翼干扰因子，建立共轴刚 性旋翼的诱导速度模型。在此基础上，建立共轴刚性旋翼飞行器飞行动力学模型，并以XH-59A 直升机为例计算纯直升机飞行模式的配平特性，使用飞行试验数据验证了理论模型的正确性，同时讨论了共轴刚性旋翼飞行器与常规直升机配平特性的异同点。     

神经网络在模拟系统故障诊断中的应用

模拟系统的故障检测诊断对于电路设计，ＶＬＳＩ等具有重要意义。而元器件的实际值究竟是有效值还是故障值，以及如何在大规模电路中测量判定它都是一个研究课题。本文利用神经网络的鲁棒性及模拟故障分析中的Ｍｏｂｉｕｓ变换，提出了一种用神经网络帮助故障诊断的有效方法，解决了线性模拟系统的诊断问题。     

Super resolution SAR imaging via parametric spectral estimationmethods

Super resolution synthetic aperture radar (SAR) image formation via sophisticated parametric spectral estimation algorithms is considered. Parametric spectral estimation methods are devised based on parametric data models and are used to estimate the model parameters. Since SAR images rather than model parameters are often used in SAR applications, we use the parameter estimates obtained with the parametric methods to simulate data matrices of large dimensions and then use the fast Fourier transform (FFT) methods on them to generate SAR images with super resolution. Experimental examples using the MSTAR and Environmental Research Institute of Michigan (ERIM) data illustrate that robust spectral estimation algorithms can generate SAR images of higher resolution than the conventional FFT methods and enhance the dominant target features     

Structure and kinetic properties of slow-mode shocks associated with magnetic reconnection in the near-Earth magnetotail

We study the structure and kinetic properties of slow-mode shocks near the plasma sheet boundary layer (PSBL) associated with magnetic reconnection by Cluster observation. The presence of slow-mode shocks is confirmed by traditional Rankine–Hugoniot (RH) analysis and Monte-Carlo shock fitting method. The Walén analysis, applied to the tailward flow associated with slow-mode shocks, also supports that plasma was accelerated across a Petschek-type slow-mode shock connected to the diffusion region. Back-streaming ions were observed on the shock layer, and cold ions were accelerated and heated by slow-mode shocks. In addition, whistler and electrostatic solitary waves were observed around the slow-mode shocks. These waves might be excited by the observed field-aligned electron beams near the shocks.     

8m×6m 风洞测控处系统

８ｍ×６ｍ风洞测控处系统以ＶＡＸ－Ⅱ为上位机，通过ＱＢＵＳ总线连接数据采集、速压控制、模型姿态角控制和数据实时分析与显示等四个子系统，完成对风洞试验的管理和数据测量与分析及显示。本文介绍了该系统的构成、主要功能和技术指标等。     

Dynamic characteristics analysis of deployable space structures considering joint clearance

The clearance in joints influences the dynamic stability and the performance of deployable space structures (DSS). A virtual experimental modal analysis (VEMA) method is proposed to deal with the effects of joint clearance and link flexibility on the dynamic characteristics of the DSS in this paper. The focus is on the finite element modeling of the clearance joint, VEMA and the modal parameters identification of the DSS. The finite element models (FEM) of the clearance joint and the deployable structure are established in ANSYS. The transient dynamic analysis is conducted to provide the time history data of excitation and response for the VEMA. The fast Fourier transform (FFT) technique is used to transform the data from time domain to frequency domain. The frequency response function is calculated to identify the modal parameters of the deployable structure. Experimental verification is provided to indicate the VEMA method is both a cost and time efficient approach to obtain the dynamic characteristics of the DSS. Finally, we analyze the effects of clearance size and gravity on the dynamic characteristics of the DSS. The analysis results indicate that the joint clearance and gravity strongly influence the dynamic characteristics of the DSS.