基于总线式集成框架的本体构建及映射研究

通过本体的构建及相应的本体映射策略,可以很好地解决信息集成过程中出现的语义异构问题。是实现异构数据源语义解析的基础。在已有研究成果总线式信息集成框架的基础上,针对目前本体构建过程存在的不足,提出了基于共享词汇表的全局本体构建技术和基于UML的局部本体构建技术,使所构建的本体元素间关系更加准确完备,具有良好的一致性。提出了基于综合相似度的本体映射策略,大大提高了本体映射的精度。     

发动机喷管对火箭气动静稳定及控制特性影响研究

发动机喷管外露于火箭尾部是常见情形,但在火箭气动设计过程中却经常不予考虑。利用数值计算方法,研究喷管外露部分对火箭气动静稳定及控制特性的影响。计算结果表明:在超声速Ma=2~12、攻角30°范围内,外露喷管对火箭气动静稳定性有1%~2%的增加,且气动控制效率明显,喷管±3°摆角产生的气动控制力矩约为头部空气舵±20°摆角的1~2倍。因此,对于确实存在喷管外露的火箭,在气动特性设计过程中需充分考虑喷管对静稳定性的影响,甚至可以考虑将喷管作为气动控制面,用于火箭无动力滑行段的姿态控制。     

过冷水滴凝固机理及凝固组织特征

针对飞机过冷水滴结冰的精细化预测需求，基于相变热力学与相变动力学相关理论，采用示差扫描量热法（DSC）、结冰风洞试验及微结构测试相结合的方法，研究了过冷水滴凝固过程的热力学机理及凝固组织特征。基于示差扫描量热法，研究了冷却速率及形核条件对结晶凝固特性的影响规律；基于结冰风洞试验开展了不同温度条件下冰相的宏观形貌及微结构特征研究。结果表明，过冷条件及冷却速率是影响过冷水滴结晶速率及结晶完善程度的重要因素。降温速率越大，结晶速率常数增大、结晶速率相应提高。同时，结晶峰变宽，结晶初始温度向低温方向移动，过冷效应相对显著；反之亦然。过冷度及冷却速率对冰相的宏观及微观形貌均有着重要影响。过冷度越大则相同时间内冷却速率越大，晶体生长过程越不充分，晶体不规则程度相对较高，同时晶粒密度变大、尺度变小，冰相表观透明度相对降低；反之，过冷度越小，则晶粒密度变小、尺度变大，冰相表观透明度相对较高。异相形核条件对加速结晶过程有重要促进作用，晶种的存在可有效加速二次结晶的触发，使过冷效应显著减弱。相关研究可为飞机结冰速率、冰相物理特征及冰形宏观形貌的精细化预测提供参考。     

固体运载火箭底部对流热环境数值模拟

采用数值仿真方法,开展了固体运载火箭底部对流热环境计算研究。采用线性化热力学参数的单一介质简化处理方法,模拟了发动机喷流与高速主流的流场,得到了热流与温度参数,并与飞行试验结果进行了对比分析。结果表明固体运载火箭底部存在较为严酷的对流热环境,本文的数值计算结果与真实飞行试验结果吻合较好,该方法可为固体运载火箭的热环境与防热设计提供参考。     

非线性能量阱对飞轮振动抑制效果的实验研究

利用薄片金属梁作为非线性刚度元件，构建一种非线性能量阱。为了验证非线性能量阱对飞轮振动特性的抑制效果，搭建地面飞轮测试系统。分别采用力锤敲击和飞轮以恒定转速运行的方法施加不同载荷，对安装非线性能量阱前后测试系统各典型位置的振动响应进行对比研究。利用实测数据，采用傅里叶变换方法将动态响应信息分别在时间域和频率域内展开。研究表明：力锤敲击产生的冲击载荷和飞轮以恒定转速运行产生的稳态载荷均可以激发非线性能量阱定向能量传输；受非线性能量阱的影响，柔性支架设备安装面和飞轮安装面振动响应得到有效抑制。但是，由于非线性能量阱阻尼和吸振子质量较小，不同程度削弱了其振动抑制效果。     

High temporal resolution global PWV dataset of 2005–2016 by using a neural network approach to determine the mean temperature of the atmosphere

Atmospheric water vapour plays an important role in phenomena related to the global hydrologic cycle and climate change. However, the rapid temporal–spatial variation in global tropospheric water vapour has not been well investigated due to a lack of long-term, high-temporal-resolution precipitable water vapour (PWV). Accordingly, this study generates an hourly PWV dataset for 272 ground-based International Global Navigation Satellite System (GNSS) Service (IGS) stations over the period of 2005–2016 using the zenith troposphere delay (ZTD) derived from global-scale GNSS observation. The root mean square (RMS) of the hourly ZTD obtained from the IGS tropospheric product is approximately 4 mm. A fifth-generation reanalysis dataset of the European Centre for Medium-range Weather Forecasting (ECMWF ERA5) is used to obtain hourly surface temperature (T) and pressure (P), which are first validated with GNSS synoptic station data and radiosonde data, respectively. Then, T and P are used to calculate the water vapour-weighted atmospheric mean temperature (Tm) and zenith hydrostatic delay (ZHD), respectively. T and P at the GNSS stations are obtained via an interpolation in the horizontal and vertical directions using the grid-based ERA5 reanalysis dataset. Here, Tm is calculated using a neural network model, whereas ZHD is obtained using an empirical Saastamoinen model. The RMS values of T and P at the collocated 693 radiosonde stations are 1.6 K and 3.1 hPa, respectively. Therefore, the theoretical error of PWV caused by the errors in ZTD, T and P is on the order of approximately 2.1 mm. A practical comparison experiment is performed using 97 collocated radiosonde stations and 23 GNSS stations equipped with meteorological sensors. The RMS and bias of the hourly PWV dataset are 2.87/?0.16 and 2.45/0.55 mm, respectively, when compared with radiosonde and GNSS stations equipped with meteorological sensors. Additionally, preliminary analysis of the hourly PWV dataset during the EI Niño event of 2014–2016 further indicates the capability of monitoring the daily changes in atmospheric water vapour. This finding is interesting and significant for further climate research.     

Two-Way-Coupling Method for Rapid Aerothermoelastic Analyses of Hypersonic Wings

Several types of coupling methods for resolving aerothermoelastic problems associated with hypersonic wings are summarized,and the appropriate coupling methods for engineering calculations are selected.Then,the calculation and analysis methods for the subdisciplines in this field are introduced,and the time step issue is discussed.A two-way-coupling rapid static aerothermoelastic method for analyzing hypersonic wings is proposed.This method considers thermal effects and is used to conduct an aerothermoelastic response analysis for a hypersonic wing.In addition,the aerodynamic force,heat flux,structural deformation and temperature field are obtained.The following three conclusions are drawn.First,the heating effect has a significant impact on the static aeroelastic response of hypersonic wings;therefore,thermal protection shields are essential.Second,the application of thermal protection shields reduces the differences in the calculation results between the one-and two-way-coupling methods.Third,hypersonic wings exhibit large thermal deformation under high-temperature environments,and in certain cases,the thermal deformation is even larger than the deformation caused by aerodynamic force.     

基于PDM的辅助工序设计

在统一的PDM数据管理平台、一致的制造工艺数据表示方式下,企业在制造工艺过程定义中存在制造工艺过程定义的协同等问题,而建立准确的数据模型是保证各子系统间信息顺畅传递的关键所在,本文就辅助工序设计方案及流程设计做了详细介绍。     

表面组装生产线的最优配置

在电子产品高速发展的时代,表面组装行业显得尤为重要,表面组装生产线的配置情况与产品的生产效率息息相关。在对表面组装生产线进行配置时需要考虑到诸多因素,包括设备的类型、组线方式及采用的工作方式等。要想实现高效生产就必须对这些因素进行系统的优化配置。