Multi-beam sounding ionograms in the polar cap region: Absorption induced by proton precipitations

The simulation of the multi-beam ionograms in the polar cap region, assessing absorption effect is performed. It is reasonable to distinguish among four different mechanisms responsible for absorption: regular absorption due to solar UV illumination, absorption associated with energetic particles precipitation, absorption connected with X-rays flare and additional absorption in Auroral oval area. In this paper the absorption attributed to proton precipitations is envisaged. The computational model of the high-latitude ionosphere with irregularities oriented to application for the high frequency wave propagation problem was elaborated (Zaalov et al., 2005). A number of the quasi-vertical ionograms in the polar cap region were simulated on the basis of this model. A well-known algorithm (Sauer and Wilkinson, 2008) is applied for the absorption effects calculation. The simulated high-latitude ionograms with the absorption effect and the measured ionograms exhibit quite a good resemblance. This paper illustrates the importance of the understanding and taking into account the absorption effect in the presence of the various structural features in the polar ionosphere (in particular, patches of enhanced electron density) in interpreting ionosonde data.     

On mid-term periodicities of high-latitude solar activity

The mid-term periodicities of polar faculae are studied separately for the total disk, northern and southern hemispheres of the Sun for a time interval from 1951 August to 1998 December. Apart from the 11-year Schwabe cycle which is the fundamental period and is found in all of the three time series, the following prominent results are found: (1) the rotational periodicity of solar activity at high latitudes is approximately from 28 to 32 days; (2) a large number of quasi-periods appearing in low-latitude solar activity (annual variation, 1.3–1.7 years, quasi-biennial oscillation, and 4–5 years) also exist in polar faculae; (3) the periodicities on both hemispheres are not identical.     

A method for calculating the laser rocket engine thermal state based on the optical discharge with numerous plasma formations

A method is presented for calculating the thermal state of the laser rocket engine (LRE) structure with numerous plasma formations in the absorption chamber. The results of evaluating radiant heat fluxes and the temperature of the LRE structure walls with regard for convective and conductive heat exchange are given; the actions of a heat flux with the specified distribution density on the structure surface are considered as functions of time and thermal radiation, that is due to the temperature and optical properties of a radiating body. It is shown that working process organization in the absorption chamber on the basis of numerous plasma formations makes it possible to produce a uniform profile of the heat flux distribution along the absorption chamber axis and thus reduce a possibility of separate structure sections overheating.     

Estimation of the Combustion Chamber Shell Working Capacity for the Reusable Liquid-Propellant Rocket Engine

On the base of the simplified analytical model for the bimetallic shell of the combustion chamber of the reusable liquid-propellant rocket engine, the analysis of the loading of connectors between the shell walls and the accumulation of inelastic deformations in the inner wall material was carried out. The results obtained can be used for evaluation of the maximal number of engine operation cycles.     

NeQuick 2 and IRI Plas VTEC predictions for low latitude and South American sector

Using vertical total electron content (VTEC) measurements obtained from GPS satellite signals the capability of the NeQuick 2 and IRI Plas models to predict VTEC over the low latitude and South American sector is analyzed. In the present work both models were used to calculate VTEC up to the height of GPS satellites. Also, comparisons between the performance of IRI Plas and IRI 2007 have been done. The data correspond to June solstice and September equinox 1999 (high solar activity) and they were obtained at nine stations. The considered latitude range extends from 18.4°N to ?64.7°N and the longitude ranges from 281.3°E to 295.9°E in the South American sector. The greatest discrepancies among model predictions and the measured VTEC are obtained at low latitudes stations placed in the equatorial anomaly region. Underestimations as strong as 40?TECU [1?TECU?=?10¹⁶?m^?2] can be observed at BOGT station for September equinox, when NeQuick2 model is used. The obtained results also show that: (a) for June solstice, in general the performance of IRI Plas for low latitude stations is better than that of NeQuick2 and, vice versa, for highest latitudes the performance of NeQuick2 is better than that of IRI Plas. For the stations TUCU and SANT both models have good performance; (b) for September equinox the performances of the models do not follow a clearly defined pattern as in the other season. However, it can be seen that for the region placed between the Northern peak and the valley of the equatorial anomaly, in general, the performance of IRI Plas is better than that of NeQuick2 for hours of maximum ionization. From TUCU to the South, the best TEC predictions are given by NeQuick2.The source of the observed deviations of the models has been explored in terms of CCIR foF2 determination in the available ionosonde stations in the region. Discrepancies can be also related to an unrealistic shape of the vertical electron density profile and or an erroneous prediction of the plasmaspheric contribution to the vertical total electron content. Moreover, the results of this study could be suggesting that in the case of NeQuick, the underestimation trend could be due to the lack of a proper plasmaspheric model in its topside representation. In contrast, the plasmaspheric model included in IRI, leads to clear overestimations of GPS derived TEC.     

Inferring Nighttime Ionospheric Parameters with the Far Ultraviolet Imager Onboard the Ionospheric Connection Explorer

The Ionospheric Connection Explorer (ICON) Far Ultraviolet (FUV) imager, ICON FUV, will measure altitude profiles of OI 135.6 nm emissions to infer nighttime ionospheric parameters. Accurate estimation of the ionospheric state requires the development of a comprehensive radiative transfer model from first principles to quantify the effects of physical processes on the production and transport of the 135.6 nm photons in the ionosphere including the mutual neutralization contribution as well as the effect of resonant scattering by atomic oxygen and pure absorption by oxygen molecules. This forward model is then used in conjunction with a constrained optimization algorithm to invert the anticipated ICON FUV line-of-sight integrated measurements. In this paper, we describe the connection between ICON FUV measurements and the nighttime ionosphere, along with the approach to inverting the measured emission profiles to derive the associated O⁺ profiles from 150–450 km in the nighttime ionosphere that directly reflect the electron density in the F-region of the ionosphere.     

Empirical model of cosmic ray spectrum in energy interval 1 MeV–100 GeV during 11-year solar cycle

The galactic cosmic rays (GCR) are the main ionization source at altitude of ∼3–35 km in the atmosphere. For high latitude anomalous cosmic ray (ACR) component has also a significant influence on the atmospheric ionization. We propose an empirical model for differential spectra D(E) of galactic and anomalous cosmic rays in energy interval 1 MeV–100 GeV during solar cycle. In the model data are used which cover three solar cycles: 20, 22 and 23. The LEAP87, IMAX92, CAPRICE94, AMS98 and BESS experimental spectra for protons and alpha particles are fitted to the proposed empirical model. The modulated GCR differential spectra are compared with force-field approximation to the one-dimensional transport equation and with solutions of two-dimensional cosmic ray transport equation. For experimental spectra, the calculation of the model parameters is performed by Levenberg–Marquardt algorithm, applied to the special case of least squares. Algorithm that combines the rapid local convergence of Newton–Raphson method with globally convergent method for non-linear systems of equations is applied for theoretically obtained differential spectra. The described programmes are realized in algorithmic language C++. The proposed model gives practical possibility for investigation of experimental data from measurements of galactic cosmic rays and their anomalous component.     

Simulation of <Emphasis Type="Italic">Z</Emphasis>-crimp shaping with the use of the ansys finite element software

A finite element model of the Z-crimp shaping from a hard sheet blank is developed and a number of calculations using the ANSYS finite element software is conducted. The calculations are carried out in the framework of elastoplastic behavior of the blank material using the classical model of bilinear kinematic (translational) hardening with corresponding parameters of elasticity and plasticity. The model takes into account kinematics of spatial transformation of the shaping equipment as well as the time-variable conditions of its contact interaction with the blank.     

Investigation of power gas turbine drives on the basis of mathematical models

A method for investigation of power gas turbine drives on the basis of mathematical models that makes it possible to enhance an information content and precision of existing techniques of power audit is proposed.     

A Method for Designing the Helicopter Skid Landing Gear by a Criterion of Landing Impact Energy Absorption

This paper presents the results of calculating the energy criterion being proposed by an example of two types of skid landing gear for a multipurpose helicopter of transport category.