影响弯曲件回弹的因素及控制方法

通过对V形及U形弯曲件回弹的影响因素:材料的屈服点、材料的厚度、零件的相对弯曲半径、零件的弯曲角、零件的形状以及模具间隙大小的分析,列出了回弹值的近似计算方法,根据计算结果,总结了采用补偿和校正来控制回弹的方法。     

基于特征模型的全系数自适应控制系统稳定性研究

讨论了基于特征模型的黄金分割加逻辑微分自适应控制律组成闭环系统的稳定性问题。针对参数未知、线性定常或慢时变的二阶不稳定对象,本文给出了在采样周期满足一定条件下,上述闭环系统渐近稳定的充分条件,其中包含对于时变参数变化范围和非线性阻尼系数的约束条件。     

企业经济效益综合评价与分级管理方法

本文针对财政部设计的企业经济效益评价指标体系，用多目标优化方法的思想对其进行优化处理，并且数理统计方法将各指标值折算成分数以符合人们的习惯；同时，用数理分析等方法将所得的评价序列进行分级归类管理。     

水平冲量作用下共面椭圆轨道上航天器的交会

本文研究了在三次水平冲量作用下,一般共面椭圆轨道上两个航天器的固定时间交会问题。推导了完成交会的必要条件,给出了三次水平冲量的大小及其作用时刻的计算方法。     

VO2薄膜制备工艺及电阻开关特性研究

用溶胶－凝胶法在非晶玻璃上制备VO2薄膜，经过熔融、涂膜、烘干和热处理等工艺最后得到电阻相变2－3个量级的VO2薄膜。对烘干温度、熔融温度、膜厚和热处理温度对薄膜电阻开关特性的影响进行了研究。通过XRD（X－ray diffraction)和XPS（X－ray photoelectron spectroscopy）对薄膜的结构和价态进行分析，表明用溶胶－凝胶法制图VO2膜工艺简单，重复性好。     

1/spl phi/ 3W grid-connection PV power inverter with partial active power filter

This paper presents a single-phase three-wire (1/spl phi/ 3W) grid-connection photovoltaic (PV) power inverter with a of partial active power filter (PAPF) feature, which can not only deal with PV power but filter current harmonics and improve power factor. Once the processed power exceeds the switch ratings, the inverter can reduce its output reactive power and harmonic power, while still supplying the maximum real power generated by the PV arrays. In the derivation of control laws, a limit circle is defined to confine the output power of the inverter. To determine the power that the inverter can process, the instantaneous reactive power of a 1/spl phi/ 3W system is defined and used to calculate reactive power, which can avoid complex detections of phase angle and magnitude of the fundamental component of a nonlinear load current. Simulation results and experimental measurements have verified the proposed algorithm and the feasibility of the inverter.     

Aperture error mitigation via local-state estimation for frequency-based emitter location

This paper considers the problem of locating a stationary coherent emitter via a single moving platform making frequency measurements in the presence of aperture state uncertainty. It is shown that the estimated emitter location is most sensitive to the receiving aperture velocity uncertainty. The required aperture velocity accuracy is determined through a noninfinitesimal perturbation analysis. A solution to location accuracy enhancement with a minimal hardware addition is attempted. It is shown that this can be achieved by mounting a high-resolution tri-axis microelectromechanical systems (MEMS) accelerometer at the aperture to measure its velocity, which can deviate significantly from that estimated by the on-board navigation system. The Doppler shifts of the GPS signal carrier frequency, whenever it can be acquired through the aperture, are also considered as a way to aid the aperture velocity measurement. A decentralized, federated processing method for the aperture velocity estimate referenced at the aperture, integrating all measurement data, is presented. An upper bound for the error of aperture velocity estimate is derived. The potential for significant accuracy enhancement for emitter location is demonstrated.     

毕棚沟 一路走过

梦是对无限、永远的可能的相信，而现实并不……黑、白棋总是在棋盘上腾转挪移，而黑、白并不……[编者按]     

多向编织碳／碳复合材料力学行为研究

本文综述了作者近十年来在多向编织碳／碳复合材料力学性能研究方面的成果，包括力学模型与强度准则、热应力分析、断裂行为、性能预报与优化设计、超高温试验技术及组织性能与高温退化等内容，并分析了其存在的新问题和解决途径。     

基于PETRI网的导弹控制系统故障诊断梯形图求解法

故障诊断是保证航空航天等大型复杂系统可靠性的重要措施，故障树为此提供了一种有效的方法，但故障树是一种系统静态行为的描述方法，如何描述系统状态的动态变迁过程成为人们追求的目标，本文在论述逻辑关系的PETRI网表示的基础上，提出了系统状态动态变迁过程的PETRI网模型梯形图求解算法，进而提出了基于PERTI网的故障诊断的梯形图求解方法，并用一实例说明了这一过程。