平均轨道要素及其在卫星星座设计中的应用

平均轨道要素在卫星轨道设计及星座仿真中具有非常重要的作用。在综合国内外现有研究成果的基础上，给出了一整套简单实用、没有奇点的密切要素与平均要素间的相互转化方法，用此法进行的星座设计及仿真工作表明该方法非常有用。同时给出了利用平均轨道要素得以的关于赤道平面圆轨道的一个有意义的结论。     

基于模糊旅行时间的动态交通分配模型

提出了一种新的模糊动态交通分配(FDTA)模型,采用模糊集合理论描述动态旅行时间,应用模糊h截集的最短路径方法找出模糊最短路径集合,计算各条路径的隶属函数,并采用C-LOGIT模型实现网络加载,最后比较了FDTA模型和经典的随机动态交通分配(SDTA)模型.仿真结果显示:在正常交通状况下FDTA模型能够获得与SDTA模型非常接近的分配结果,并更加符合实际的交通状况;当有交通拥堵、事故、施工/管制等动态交通状况发生时,FDTA模型能够解决动态交通状况的建模问题;当交通网络结构复杂时,通过改变h值可以有效减少模糊最短路径的数量,提高计算效率.     

飞机电磁防护设计

飞机经常在恶劣的电磁环境中飞行,为使机内的设备不受损害,除了保证机载设备具有足够的抗干扰能力外,在飞机结构上,还应采取其他防护措施。本文在分析电磁危害性的基础上,介绍了飞机雷电防护、静电防护,以及抗电磁脉冲和射频干扰的设计方法。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

面向立方星的相对位姿测量视觉传感器设计

针对立方星在轨服务任务中的近距离相对导航问题，提出一种相对位姿测量视觉传感器设计。为应对空间复杂的光照条件，设计一种具有多层结构的立体靶标，选取波长为850nm的LED灯作为立体靶标的光源。在相机镜头处安装850nm的红外窄带滤镜以提高立体靶标成像质量。为提高视觉传感器的测量精度，提出一种迭代直接求解(iterative direct solution, IDS)的相对位姿估计算法。该算法直接利用立体靶标上的非共面点提供的深度信息获得初始相对位姿，然后引入Haralick迭代算法来优化初始测量结果。搭建六自由度实验平台对该视觉传感器进行性能测试。实验结果表明,该视觉传感器能克服背景光的干扰，且提出的 IDS相对位姿估计算法的精度优于经典的P3P算法和EPnP算法。     

两级对转风扇非定常特性分析

为研究两级对转风扇的非定常特性,对该风扇进行了设计转速下的定常和非定常数值模拟。结果表明:非定常得到的压气机裕度(15.3%)比定常(14.5%)的更高,主要原因在于近失速时,上游尾迹和泄漏流能改善叶尖吸力面分离;非失速工况时,上游尾迹和泄漏流与下游泄漏流、激波之间复杂的非线性作用会引起熵增,从而导致叶尖流动损失的增加;此外,所有工况下,上游尾迹对叶片根部角区分离都起到了抑制作用,降低了损失。     

翼吊短舱形式发动机安装效应的风洞试验研究

为了确定实际飞行使用条件下,发动机状态变化时,进排气系统损失对飞机气动特性的影响,本文针对翼吊短舱形式的发动机开展了缩比模型风洞试验,分别进行了基本构型与起飞构型下,马赫数0.1、0.15、0.2,攻角0°~15°变化,5种不同发动机状态条件下的风洞试验,通过数据分析,明确了该类型发动机推/阻力划分的基本方法,分析了发动机状态变化时飞机气动特性的改变及修正方法。风洞试验结果表明：发动机状态变化对飞机升阻特性影响明显,飞机设计研发阶段不能仅对短舱通流模型,或单一发动机状态下的动力短舱模型进行损失修正,必须建立合理的推/阻划分体系,对实际使用条件下,发动机状态变化引起的进排气损失进行修正。     

基于人工地标的移动机器人定位与调整技术

在飞机大型构件测量领域,针对测量设备自动化转站时存在移动机器人无法准确到达站位的问题,提出了采用基于人工地标的移动机器人定位与调整技术实现转站时的精确定位。其次,设计了一种人工地标,给出使用激光跟踪仪的地标标定工装以及标定方法,通过该方法可得到地标在全局坐标系下的坐标。同时,介绍了地标的编码与位姿的解算方法,以及移动机器人位姿调整策略。最后,试验表明,人工地标测量的位置和角度误差均较小,移动机器人通过人工地标的定位与调整后的精度可以满足自动化转站的精度要求。