N5A飞机失速警告器的安装与校准

探讨失速警告器的选位安装与校准问题。失速警告器的选位安装与校准均由试飞实验确定。提出了如何调整失速警告器安装位置和安装角的指导性原则,论述了用表速计量失速预警速度的理由。     

AB型聚酰亚胺单体的合成及气相沉积聚合研究

合成了三种AB型聚酰亚胺单体:4-(4-氨基苯氧基)邻苯二甲酸(单体4),4-(3-氨基苯氧基)邻苯二甲酸(单体7)和对(间)乙基4-(3-氨基苯氧基)邻苯二甲酸酯(单体8或9)。利用热失重分析(TGA)对比研究了这三种AB型聚酰亚胺单体的热行为。结果表明,单体4、单体7和单体8(9)在升温的过程中能发生热聚合生成聚酰亚胺。将单体4用于气相沉积聚合设备,得到了均匀透明的聚酰亚胺薄膜。对分子结构的修饰使单体8(9)较之单体7有更好的挥发性。     

风对建筑绕流流动的数值方法

本文利用k-ε湍流模型及SIMPLE方法,在二维条件下,就风对建筑绕流流动进行了数值模拟,建筑及地面的边界条件采用以低Re数k-ε湍流模型中导出的壁函数处理近壁湍流。自由边界采用外推格式。对于计算域中的建筑物则利用控制粘性系数的方法处理。并对计算结果和风洞实验进行了比较。 为了研究建筑物之间的气流及压力分布,本文还对并列两栋建筑的不同情况进行了数值计算和分析。     

发展我国航空复合材料应用的途径

 随着复合材料在航空、航天界使用历史的延续,它的优越性日益为人们所认识。复合材料比强度、比刚度高,耐疲劳性能好,具有可设计性,可以整体成形,从而可以减轻飞机重量,节省燃油消耗,提高飞机性能,延长飞机寿命,减少制造工时,降低维修费用。这不仅给航空界带来技术效益,也带来了经济效益,使复合材料在航空上的应用具有很大潜力。预期到九十年代,复合材料在军用飞机上的用量将占飞机结构重量的40～50％,在民用机和直升机上的用量将分别占60％和80％。     

瞬态过程热传递对压气机稳定裕度的影响

详细分析了发动机瞬变过程中热传递对压气机稳定性的影响机理，建立了热传递对压气机稳定裕度影响的数学模型，并以一台增压比为26的涡扇发动机为例进行计算，结果表明了建立模型的正确性。     

The Time-of-Flight Energy,Angle, Mass Spectrograph (Teams) Experiment for Fast

The Time-of-flight Energy Angle Mass Spectrograph (TEAMS) is being flown on the FAST Small Explorer mission to measure the 3-dimensional distribution function of the major ion species present in the lower magnetosphere. The instrument is similar to time-of-flight plasma analyzer systems that have been designed and planned for flight as CODIF (COmposition and DIstribution Function analyzer) on the four European Space Agency Cluster-II spacecraft and, as ESIC (Equator-S Ion Composition instrument) on Equator-S. This instrument allows the 3-dimensional distribution functions of individual ion species to be determined within spin period (2.5 s). Two-dimensional distributions are measured in 80 ms. These capabilities are crucial for the study of selective energization processes in the auroral regions of the magnetosphere. The design, operational characteristics, and test and calibration results for this instrument are presented. The sensor consists of a toroidal top-hat electrostatic analyzer with instantaneous acceptance of ions over 360° in polar angle. After post-acceleration of the incoming ions by up to 25 kV, a time-of-flight mass spectrograph discriminates the individual species. It has been demonstrated through calibration that the instrument can easily separate H⁺, He²⁺, He⁺, O⁺ and, for energies after post-acceleration of > 20 keV, even O₂ ⁺ molecules. On-board mass discrimination and the internal accumulation of several distinct data quantities combined with the spacecraft's flexible telemetry formatting allow for instrument data rates from 7.8 kb s^–1 to 315 kb s^–1 to be telemetered to ground through the FAST centralized Instrument Data Processor.     

稳态周向混合畸变对压气机特性和流场的影响

用完全径向平衡方程加多扇平行压气机模型处理复杂畸变流场的方法，计算出进口流场组合参数畸变对压气机特性和性能的影响，并得出了压气机在进口畸变条件下流场的详细情况。     

表面活性剂对Ni-Co-PTFE复合电镀的影响

研究了表面活性剂对Ni-Co-PTFE复合电镀的影响情况，发现表面活性剂种类及其用量对该复合镀层中PTFE含量及镀层摩擦性能有显著的影响，其中以非离子表面活性剂与全氟阳离子表面活性剂组成的复合活性剂效果最好，其最佳用量为1g/L，获得的复合镀层微观表面结构致密，微粒分布均匀，摩擦系数最小，显微硬度HV0.1最大。     

Spacecraft optimal rendezvous controller design using simulated annealing

A new global approach for rendezvous Linear Quadratic controller design is presented in this paper. Instead of solving the algebraic Riccati equation, a continuous simulated annealing (SA) algorithm is used to design rendezvous LQ controller. Optimization of one automatic rendezvous controller with 18 design parameters is illustrated. The results show that the SA algorithm can locate the global solution effectively and robust, besides a great number of global solutions have been obtained by the SA. The SA has demonstrated better performance than other optimization algorithms such as floating-coded Genetic Algorithm, Simplex method and Powell algorithm.     

三角翼低速动态大攻角气动特性试验研究

对后掠角分别为X=60°、70°和80°尖前缘平板三角翼模型和一个前缘后掠角为（76° 40°）的双三角翼模型在低速风洞中作大攻角俯仰摩波运动，振幅am=30°、60°和90°，缩减频率K=0.01～0.12，基于根弦长雷诺数Re=2.76×10^5～8.23×10^5。进行了六分量动态气动载荷测量，动态流动显示和70°三角翼上翼面非定常压力测量，并分别与对应的静态试验结果比较。分析了运动参数包括缩减频率、振幅和Re数、后掠角对气流动态迟滞特性的影响。