Transonic buffet control research with two types of shock control bump based on RAE2822 airfoil

Current research shows that the traditional shock control bump (SCB) can weaken the intensity of shock and better the transonic buffet performance.The author finds that when SCB is placed downstream of the shock,it can decrease the adverse pressure gradient.This may prevent the shock foot separation bubble to merge with the trailing edge separation and finally improve the buffet performance.Based on RAE2822 airfoil,two types of SCB are designed according to the two different mechanisms.By using Reynolds-averaged Navier-Stokes (RANS) and unsteady Reynolds-averaged Navier-Stokes (URANS) methods to analyze the properties of RAE2822 airfoil with and without SCB,the results show that the downstream SCB can better the buffet performance under a wide range of freestream Mach number and the steady aerodynamics characteristic is similar to that of RAE2822 airfoil.The traditional SCB can only weaken the intensity of the shock under the design condition.Under the off-design conditions,the SCB does not do much to or even worsen the buffet performance.Indeed,the use of backward bump can flatten the leeward side of the airfoil,and this is similar to the mechanism that supercritical airfoil can weaken the recompression of shock wave.     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.     

消费者创新性对手机银行使用意愿的影响研究

探索消费者创新性对手机银行使用意愿的影响,基于技术接受模型,构建了消费者创新性影响手机银行使用意愿的假设模型,依据假设模型开展了问卷调查。通过AMOS17.0软件对调查数据和假设模型进行了结构方程模型检验。研究结果表明,消费者创新性对手机银行使用意向具有显著影响,其影响机制是通过消费者对手机银行易用性和有用性的感知影响消费者对手机银行的使用态度,进而影响手机银行使用意向。在此基础上对商业银行发展手机银行提出了实践建议。     

90°多弯管阻力系数计算方法

为准确获得90°组合多弯管阻力系数,采用数值模拟方法对S弯管管内流动进行模拟,并通过分析归纳S弯管局部阻力的相邻影响机制及规律,提出了90°组合弯管阻力系数计算方法.研究结果表明:弯管阻力系数受2弯连接段长度影响的规律与文献试验结果一致,数值计算方法准确有效;当连接段长度大于4倍管径时,S弯管阻力系数呈线性增长;提出的90°组合弯管阻力系数计算方法考虑了多弯管间相邻影响,且采用提出的方法计算了3弯管和多弯管的阻力系数,并将结果与数值模拟结果进行了对比,二者之间的差距均在3％之内,适合工程应用.     

基于磁共振线宽的Xe核自旋横向弛豫时间测量方法

随着核磁共振陀螺技术的发展,高精度核磁共振陀螺对原子气室性能提出了更高要求.原子气室内Xe核自旋的横向弛豫时间(T2)是衡量原子气室性能的重要参数之一,T2的常用测量方法为自由感应衰减法(Free Induction Decay,FID).当T2较短时,由于自旋进动信号易受外界干扰,FID方法难以对T2进行精确测量.根据磁共振线宽理论以及自旋进动信号检测技术,针对T2较短的原子气室,提出了基于磁共振线宽的Xe核自旋横向弛豫时间测量方法,构建了测试装置,对Xe核自旋进行了测试.测试结果表明,该测量方法能够有效获得Xe核自旋的横向弛豫时间,克服了FID方法对T2较短的原子气室难以测量的局限性,为检验核磁共振陀螺中原子气室的性能提供了有效测试手段.     

离心叶轮全三维反问题方法设计误差稳定性研究

用流线曲率全三维反问题方法和引入滑移因子模型的准三维流线曲率反问题方法设计了叶片数不同的和增压比不同的小型高速离心叶轮.用商用计算流体力学(CFD)求解器估算了这些叶轮的性能.对比了这两种反问题方法的设计误差稳定性,考察了分流叶片对设计误差的影响.结果表明,流线曲率全三维反问题方法能够根据叶片负荷对叶片设计做出恰当调整.较准三维反问题方法,流线曲率全三维反问题方法所设计叶轮的增压比普遍偏高.随叶片负荷增加,较准三维反问题方法,流线曲率全三维反问题方法的设计误差变化较小,即其设计误差稳定性明显较好.分流叶片对准三维反问题方法设计结果的影响明显较小.      

高强太阳光无线能量传输能量供给平台设计

为了满足微小卫星群落编队飞行技术快速发展的需要,设计了一种能量供给平台.该平台中菲涅尔透镜（太阳能聚集装置）收集空间太阳光,并将聚焦光能耦合进光纤束（柔性转向装置）以进行传输和换向.由3个薄透镜组成的透镜组（二次发射装置）将出射光线整合成高强平行光束进行光能传输,将光能以高强太阳光形式无线传输至航天器群落,实现能量供给.该能量供给平台能量收集传输效率可达到70%以上,在提高效率、降低成本方面具有一定的优越性.      

高旋转数下直肋U型方通道的换热特性研究

通过提高U型通道气体压力到500kPa以上,将实验雷诺数Re和旋转数Ro范围分别扩展到10000～70000和0～2.0,从而匹配真实发动机转子叶片的工作条件。在此基础上实验研究了高旋转数下带直肋的、方形截面的U型通道的换热特性。研究结果表明:第一通道前缘面的努塞尔数比随旋转数的增大先下降后增强,该临界旋转数为定值Roc=0.26;随着旋转数的增大,第二通道前缘面的努塞尔数比一直高于后缘面,与光滑通道中的换热规律不同;随着旋转数的增大,第二通道内外侧面努塞尔数比的差异逐渐减小,在临近出口处几乎没有差异,与光滑通道相比正好相反。