The development of a digital video motion detection test set

This paper describes the current effort to develop a standardized data set, or suite of digital video sequences, that can be used for test and evaluation of digital video motion detectors (VMDs) for exterior applications. We have drawn from an extensive video database of typical application scenarios to assemble a comprehensive data set. These data, some existing for many years on analog videotape, have been converted to a reproducible digital format and edited to generate test sequences several minutes long for many scenarios. Sequences include non-alarm video, intrusions and nuisance alarm sources, taken with a variety of imaging sensors including monochrome CCD cameras and infrared (thermal) imaging cameras, under a variety of daytime and nighttime conditions. The paper presents an analysis of the variables and estimates the complexity of a thorough data set. Some of this video data test has been digitized for CD-ROM storage and playback. We are considering developing a DVD disk for possible use in screening and testing VMDs prior to government testing and deployment. In addition, this digital video data may be used by VMD developers for further refinement or customization of their product to meet specific requirements. These application scenarios may also be used to define the testing parameters for future procurement qualification. A personal computer may be used to play back either the CD-ROM or the DVD video data. A consumer electronics-style DVD player may be used to replay the DVD disk. This paper also discusses various aspects of digital video storage including formats, resolution, CD-ROM and DVD storage capacity, formats, editing and playback     

An overview of RADOM results for earth and moon radiation environment on Chandrayaan-1 satellite

The RADiatiOn Monitor (RADOM) is a miniature dosimeter-spectrometer that flew onboard the Chandrayaan-1 lunar mission in order to monitor the local radiation environment. Primary objective of the RADOM experiment was to measure the total absorbed dose, flux of surrounding energetic particles and spectrum of the deposited energy from high energy particles both en-route and in lunar orbit. RADOM was the first experiment to be switched on after the launch of Chandrayaan-1 and was operational until the end of the mission. This paper summarizes the observations carried out by RADOM during the entire life time (22 October 2008–31 August 2009) of the Chandrayaan-1 mission and compares the measurement by RADOM with the radiation belt models such as AP-8, AE-8 and CRRESS.     

The Magnetospheric Multiscale Magnetometers

The success of the Magnetospheric Multiscale mission depends on the accurate measurement of the magnetic field on all four spacecraft. To ensure this success, two independently designed and built fluxgate magnetometers were developed, avoiding single-point failures. The magnetometers were dubbed the digital fluxgate (DFG), which uses an ASIC implementation and was supplied by the Space Research Institute of the Austrian Academy of Sciences and the analogue magnetometer (AFG) with a more traditional circuit board design supplied by the University of California, Los Angeles. A stringent magnetic cleanliness program was executed under the supervision of the Johns Hopkins University’s Applied Physics Laboratory. To achieve mission objectives, the calibration determined on the ground will be refined in space to ensure all eight magnetometers are precisely inter-calibrated. Near real-time data plays a key role in the transmission of high-resolution observations stored on board so rapid processing of the low-resolution data is required. This article describes these instruments, the magnetic cleanliness program, and the instrument pre-launch calibrations, the planned in-flight calibration program, and the information flow that provides the data on the rapid time scale needed for mission success.     

A simplified closed artificial ecosystem--recycling of organic matter into wheat plants.

A simplified closed system consisting of a plant growth chamber coupled to a decomposition chamber was used to study carbon exchange dynamics. The CO2 produced via the decomposition of wheat straw was used for photosynthetic carbon uptake by wheat plants. The atmosphere of the two chambers was connected through a circuit of known flow rate. Thus, monitoring the CO2 concentrations in both compartments allowed measurement of the carbon exchange between the chambers, and estimation of the rate of respiration processes in the decomposition chamber and photosynthetic rate in the producer chamber. The objective for CELSS research was to simulate a system where a compartment producing food via photosynthesis, would be supplied by CO2 produced from respiration processes. The decomposition of biomass by the decomposer simulated both the metabolism of a crew and the result of a recycling system for inedible biomass. Concerning terrestrial ecosystems, the objective was to study organic matter decomposition in soil and other processes related to permanent grasslands.     

Output Signal-to-Noise Ratios for Amplitude-Modulated Noise-Like Lasers

A general expression of the output SNR of a photodetector is derived for a noise-like laser amplitude-modulated by a stationary Gaussian random modulating signal in the presence of a background light. The electric field Vx(t) of the noise-like laser is assumed to be a stationary narrowband Gaussian random process with zero mean. Two types of modulating signal are considered, the baseband and bandpass modulating signals. More specifically, the effects of the center frequency of the modulating signal, the modulating degree, the bandwidth ration of the noise-like laser to the modulating signal, the effective average quantum rate, and input CNR on output SNR are studied. The detection characteristics of the noise-like laser are also made clear by comparison with the case of a coherent laser.     

In-Flight Alignment and Calibration of Inertial Measurement Units?Part II: Experimental Results

This is the second part of a two-part paper which summarizes work pursued by the author in 1967 [2]. The paper describes the application of minimum-variance estimation techniques for in-flight alignment and calibration of an inertial measurement unit (IMU) relative to another IMU and/or some other reference. The first paper [1] formulates the problem, and this paper reports numerical results and analyses. The approach taken is to cast the problem into the framework of Kalman-Bucy estimation theory, where velocity and position differences between the two IMU's are used as observations and the IMU parameters of interest become part of the state vector. Instrument quantization and computer roundoff errors are considered as measurement noise, and environmental induced random accelerations are considered as state noise. In this paper, numerical results for three important IMU error parameter configurations are presented and discussed. The main results of the paper determine the effects of state and observation noise levels and the nominal trajectory on the identifications of the errors for these configurations. A discussion of the minimum number of trajectory maneuvers and of the optimal trajectory maneuvering is given.     

Design and Application of an Adaptive Tracking Filter Control System

The design of an adaptive tracking filter control system and its application to large flexible booster vehicles is described. The problem of elastic vehicle stability is considered along with its solution by conventional and adaptive techniques. The improvement in vehicle stability, which may be achieved with the adaptive tracking filter technique as compared to conventional techniques, is shown. The control system evolved uses two adaptive tracking filters to phase stabilize the first and second bending modes, in addition to conventional compensation techniques. The application of this adaptive technique to a vehicle in which the modal frequencies are in close proximity (<2.5 percent separation) is discussed. The mechanization of the adaptive control system involves the selection of design techniques and components that are electrically and physically compatible with the intended airborne application. The development of a suitable frequency tracking technique and tracking filter is described, in addition to the electronic and mechanical design of the adaptive control system prototype.     

Astrometric positioning and orbit determination of geostationary satellites

In the project titled “Astrometric Positioning of Geostationary Satellite” (PASAGE), carried out by the Real Instituto y Observatorio de la Armada (ROA), optical observation techniques were developed to allow satellites to be located in the geostationary ring with angular accuracies of up to a few tenths of an arcsec. These techniques do not necessarily require the use of large telescopes or especially dark areas, and furthermore, because optical observation is a passive method, they could be directly applicable to the detection and monitoring of passive objects such as space debris in the geostationary ring.     

Behavioral science: a progress report

A prominent neuroscientist A. Damasio has observed that “More may have been learned about the brain and the mind in the 1990s... than during the entire previous history of psychology and neuroscience” (1999). This progress, which should continue at an exponentially increasing pace as we move into the 21^st century, sets the stage for another revolution-in the scientific formulation of intentional behavior. Just as applied sciences such as fluid mechanics and solid-state electronics benefited from breakthroughs in physics, so it may be expected that social psychology and economics, for example, will similarly benefit from our expanding knowledge of psychosomatic and psychological function. Economics, however, with its basic concepts dating from the nineteenth century, must endure an extensive renewal. Toward this end, a new mathematical theory of behavior was formulated in the early 1990s based on the contributions of prominent psychologists and economists over the past two centuries. Presentation of the new approach at international conferences continued in 2000 with attention moving beyond the fundamentals into macroeconomic concerns including business cycles, productivity, and unemployment     

On the Ballistic Efficiency of Bicalibre Aerial Vehicles with Prevailing Coast Phase

The advantages of the bicalibre configuration of the volumetric packaging in comparison with the single-calibre one are shown within the framework of the concept of ballistic efficiency (BE) enhancement of the aerial vehicles (AV) with prevailing coast phase. The rational range of booster and coaster calibre ratios of bicalibre aerial vehicles for both solid propellant jet engines and combined propulsion units are defined.