桥函数理论的研究进展

叙述了从研究沃尔什函数的复制理论和方块脉冲函数移位方法出发，推出桥函数的构造过程，桥函数把工程中常用的沃尔什函数和方块脉冲函数这两种似乎不相关的函数联系了起来，本文详细地给出了四种桥函数的构造过程和它们的波形。     

The status of qualification of a new separator system for advancedaerospace battery cells

A nickel cadmium cell system which utilizes a polypropylene separator impregnated with polybenzimadazole, and which shows promise of providing an aerospace battery with performance equivalent to Super NiCd, and yet is more cost effective, is described. Background information, cell construction information, detailed test program information and data, and status of qualification are given     

NH－93型有机氟涂料的研究

采用国产含氟乳液为基料，研究了辅料的种类和用量，涂料的组成及工艺参数对涂膜性能的影响，提出了能获得良好涂膜的ＮＨ－９３型氟涂料的配方和成膜条件。     

Angular Velocity Measurement Using Rate Gyros in a Spinning Vehicle

It is shown that when the gyro spin vector is in opposition to the spin vector of the vehicle, the output differential equation of the gyro becomes unstable for large vehicle spin values. When the gyro is used with its spin vector along the spin vector of the vehicle, the steady-state response of the gyro is a nonlinear function of the roll rate of the vehicle.     

Daytime VHF amplitude scintillations recorded at an Indian low-latitude station,Waltair (17.7°N, 83.3°E) during 1997–2003

In this research, it is presented the daytime amplitude scintillations recorded at VHF frequency (244 MHz) at an Indian low-latitude station, Waltair (17.7°N, 83.3°E) during seven continuous years (1997–2003). Contrary to the nighttime scintillation seasonal trends, the occurrence of daytime scintillations maximizes during summer followed by winter and the equinox seasons. The fade depths, scintillation indices and the patch durations of daytime scintillations are meager when compared with their nighttime counterparts. A co-located digital high frequency (HF) ionosonde radar confirms the presence of sporadic (Es) layers when daytime scintillations are observed. The presence of daytime scintillations is evident when the critical frequency of the Es-layer (foEs) is ≥4 MHz and Es-layers are characterized by a highly diffuse range spread Es echoes as can be seen on ionograms. It is surmised that the gradient drift instability (GDI) seems to be the possible mechanism for the generation of these daytime scintillations. It is quite likely that the spread Es-F-layer coupling is done through polarization electric fields (Ep) that develop inside the destabilized patches of sporadic E layers, which are mapped up to the F region along the field lines as to initiate the daytime scintillations through the GDI mechanism. Further, the presence of additional stratification of ionosphere F-layer, popularly known as the F3-layer, is observed on ionograms once the Es-layers and daytime scintillations are ceased.     

单晶叶片材料蠕变试验研究

针对单晶材料涡轮叶片的蠕变计算分析的需要,对我国自行设计的单晶材料DD3进行蠕变试验,根据试验结果提出了进行曲线拟合的方法,并与有限元法计算相结合,对拟合出的蠕变律常数进行了修正,提出了较好符合试验曲线的较精确的Norton蠕变律有关常数A、n和p值,满足了单晶叶片非线性有限元蠕变分析的要求.     

低空无人机交通管理概览与建议综述

大量无序飞行的低空无人机运行会对地面设施、公共安全、空中载人飞行器等带来危害。然而,目前民航空中交通管理不能适应未来数以百万架的无人机。为了应对该挑战,世界各国针对低空无人机空中交通管理开发了新框架。低空无人机空中交通管理属于近几年出来的新事物。藉此聚焦于低空无人机交通管理,从4个方面进行概览：低空无人机相关的空中交通基本概念及现状、低空无人机交通管理介绍、低空无人机交通管理的关键技术和低空无人机交通管理相关科学问题,以期望对无人机产业健康发展有一定的建议意义。     

某单缸柴油机表面辐射噪声源试验分析与改进

针对某单缸柴油机表面辐射噪声过大,整机声功率级超标的问题,采用9点声功率法与近场声压扫描阵面法相结合的识别方法,进行了柴油机主要表面辐射噪声源识别的试验分析,发现齿轮室盖、油底壳、水油箱是单缸柴油机主要表面噪声源的主要辐射部件。通过采用频谱分析方法,进一步研究了主要辐射部件振动特性与表面噪声辐射特性之间的关系。在此基础上,设计了一种具有高插入损失的紧贴式齿轮室盖隔声结构、选择了具有高阻尼特性的复合阻尼钢板油底壳、选取了新型尼龙合金复合材料制造的水油箱来降低单缸柴油机的表面辐射噪声。综合以上各种降噪方法,使得单缸柴油机整机噪声水平降低了1.5dB(A),优于国家标准要求。     

焊接残余应力超声无损检测技术

基于声弹性理论,针对天然气输送管道焊缝残余应力检测问题,本文提出了一种检测新技术,并研制残余应力超声检测系统。该系统采用一发一收的探头分布方式,传感器沿着管道直焊缝放置,传感器吸附于管道外壁并在管道表面及亚表面激发出临界折射纵波,测得管道外壁沿着直焊缝处的焊接残余应力分布情况,并且经过实验验证该系统对管道焊接残余应力测量的可靠性。针对温度变化较大环境下的曲面材料的残余应力检测问题,提出了温度补偿技术和曲率补偿技术。     

Process-condition-driven Automatic Location of Components

In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research on intelligent computer aided design (CAD) techniques. Integrated with the investigation into intelligent design techniques for aircraft manufacturing toolings, in-depth researches on this issue are conducted. Formalized automatic location principles, representative methods and implementation algorithms are proposed and established. First, several terms and their formalized representative methods including process condition, location base and location operator are defined. Second, computation modeling of components automatic location and methods of location transformation are proposed. Then, definition of base structure and some key algorithms for automatic location are introduced. These principles and algorithms are developed, applied and verified in research project “Jig Intelligent CAD (JigICAD) System”.