筒子楼改扩建技术处理措施

筒子楼改扩建改变了原有建筑物的使用功能,但是它的改造是在不破坏楼房整体结构性的情况下进行施工的,本文主要介绍了筒子楼改扩建时一些关键部位结构的处理方法及措施.     

认知风格理论对外语教与学的启示

认知风格是学习者习惯性的认知特点,它相对固定。不同学习者往往具有不同的认知特点。在二语习得理论中,认知风格被视为学习者个体内在因素之一。研究认知风格对于教与学都具有重要的意义。     

金属粉末注射成型技术在航空制造业的应用

利用粉末冶金注射成型技术制备GH742y合金零部件的工艺成为倍受关注的问题,应根据混炼、注射、脱脂以及烧结等工艺过程对注射成型样品的影响,制定合适的生产工艺,以获得满足航空工业使用要求的高温合金材料.     

Measurement of mass diffusion coefficients of O_2 in aviation fuel through digital holographic interferometry

The experimental apparatus to measure the mass diffusion coefficients of O2 in aviation fuel was constructed based on the digital holographic interferometry method. The theory of mass diffusion coefficient and interference image processing were introduced in detail. The accuracy of the experiment was verified by measuring the mass diffusion coefficient of 0.33 mol/L KCl in aqueous solution at 298.15 K. The mass diffusion coefficients of O_2 in RP3 and RP5 aviation fuels were measured at temperature from 278.15 K to 333.15 K, and the Arrhenius equation was employed to fit the experimental data. In terms of the Stokes-Einstein equation, the viscosities of these two aviation fuels were tested to estimate the correlation among mass diffusion coefficient, viscosity and temperature. A uniform polynomial calculation correlation was proposed to predict the mass diffusion coefficients of O_2 in both RP3 and RP5 aviation fuels, and its accuracy is considerably higher than that of the Stokes-Einstein equation.     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

螺旋桨桨叶1P气动载荷研究

介绍了一种１Ｐ载荷实验研究方法－桨叶应变测试法,首先通过桨叶剖面速度三角形及气动力分析给出了１Ｐ载荷与测量应变的关系,然后通过地面试验和飞行试验进行了验证。试验结果表明,螺旋桨１Ｐ载荷主要由于非对称气流流过桨盘面改变了桨叶剖面速度三角形而引起,迎角,侧滑角的增加,会产生较大的１Ｐ载荷;机动飞行,如快速拉杆,荷兰滚等也会产生较大的１Ｐ载荷。     

试建立基于检测振动加速度信号的设备故障部位诊断模型

往复式压缩机、内燃机等复杂设备,一旦出现故障,诊断的首要任务是要判断它们的故障部位。以检测振动加速度信号取代传统的耳听手摸的经验方法是这类设备诊断的一个趋势。尝试着提出了基于检测振动加速度信号的设备故障部位诊断模型--单特征模型和多特征集成模型。通过在往复式压缩机和内燃机上的实例验证表明,提出的单特征模型和多特征集成模型具有一定的可行性,其中多特征集成模型比单特征模型更有效。     

航天飞机再入航迹初步设计的一种计算方法

本文给出一种由航天飞机质心位置和飞行速度随高度的变化值计算再入航迹其它运动参数的方法。用美国“哥伦比亚”号航天飞机轨道器的飞行数据验算表明,该方法不失为一种可供再入航迹初步设计中选用的简便算法。     

热化学非平衡喷管流场的数值研究

从非定常的基本方程出发,采用时间相关法,利用时间预处理的ＭａｃＣｏｒｍａｃｋ格式对空气为实验气体的７组元热化学非平衡一维喷管流场进行了数值计算,并分析了热化学非平衡对流场的影响。结果表明,对于一些实际应用的喷管条件,热化学非平衡具有较为显著的影响。