磁层中重离子O＋通量密度分布的理论研究

应用求解得到的分布函数，研究了北半球子午面内极光带区起源的重离子Ｏ＋在磁层中的通量密度定态分布及其特性．结果表明：（１）重离子Ｏ＋通量密度分布沿ＧＳＭＺ轴方向呈峰状结构，其峰值随地心距离增大而减小，在近地空间减小较快；（２）磁扰动时，Ｏ＋离子占据的空间范围较磁宁静时大，通量峰较不突出；（３）理论估算的磁尾等离子体片边界层附近重离子Ｏ＋通量密度与观测结果相一致．     

Autonomous navigation of Mars probe using X-ray pulsars: Modeling and results

Autonomous navigation of Mars probe is a main challenge due to the lack of dense ground tracking network measurements. In this paper, autonomous navigation of the Mars probe Orbits is investigated using the X-ray pulsars. A group of X-ray pulsars with high ranging accuracy are selected based on their properties and an adaptive extended Kalman filter is developed to incorporate the Mars probe dynamics and pulsar-based ranging measurements. Results of numerical experiment show that the three-dimensional positioning accuracy can achieve 750m in X-axis, 220m in Y-axis and 230m in Z-axis, which is much better than the positioning results by current Very Long Baseline Interferometry (VLBI) or Doppler observations with the accuracy of 150 km or several kilometers, respectively.     

Finite element reconstruction approach for on-orbit spacecraft breakup dynamics simulation and fragment analysis

Breakup model is the key area of space debris environment modeling. NASA standard breakup model is currently the most widely used for general-purpose. It is a statistical model found based on space surveillance data and a few ground-based test data. NASA model takes the mass, impact velocity magnitude for input and provides the fragment size, area-to-mass ratio, velocity magnitude distributions for output. A more precise approach for spacecraft disintegration fragment analysis is presented in this paper. This approach is based on hypervelocity impact dynamics and takes the shape, material, internal structure and impact location etc. of spacecraft and impactor, which might greatly affect the fragment distribution, into consideration. The approach is a combination of finite element and particle methods, entitled finite element reconstruction (FER). By reconstructing elements from the particle debris cloud, reliable individual fragments are identified. Fragment distribution is generated with undirected graph conversion and connected component analysis. Ground-based test from literature is introduced for verification. In the simulation satellite targets and impactors are modeled in detail including the shape, material, internal structure and so on. FER output includes the total number of fragments and the mass, size and velocity vector of each fragment. The reported fragment distribution of FER shows good agreement with the test, and has good accuracy for small fragments.     

Seismo-ionospheric anomalies in total electron content of the GIM and electron density of DEMETER before the 27 February 2010 M8.8 Chile earthquake

In this paper we examine the pre-earthquake ionospheric anomalies by the total electron content (TEC) extracted from GIM (global ionospheric map) and the electron density (Ne) observed by the DEMETER (Detection of Electro-Magnetic Emissions Transmitted from Earthquake Regions) satellite during the 2010 M8.8 Chile earthquake. Temporal variations show the nighttime TEC and Ne simultaneously increase 9–19 days before the earthquake. A cross-comparison of data recorded during the period of 1 February to 3 March in 2006–2010 confirms the above temporal anomalies specifically appear in 2010. The spatial analyses show that the anomalies tend to appear over the epicenter.     

Powered-descent trajectory optimization scheme for Mars landing

This paper presents a trajectory optimization scheme for powered-descent phase of Mars landing with considerations of disturbance. Firstly, θ–D$\theta ''–''D$ method is applied to design a suboptimal control law with descent model in the absence of disturbance. Secondly, disturbance is estimated by disturbance observer, and the disturbance estimation is as feedforward compensation. Then, semi-global stability analysis of the composite controller consisting of the nonlinear suboptimal controller and the disturbance feedforward compensation is proposed. Finally, to verify the effectiveness of proposed control scheme, an application including relevant simulations on a Mars landing mission is demonstrated.     

飞行器航迹倾角的自适应动态面控制

针对飞行器纵向模型具有参数不确定性和外界干扰的特点,提出一种飞行器航迹倾角的自适应动态面控制方法.动态面控制方法通过引入一阶低通滤波器避免了传统反演设计存在的"微分爆炸"现象,采用自适应律对模型未知参数进行在线估计,并利用非线性阻尼项克服外界干扰.通过Lyapunov方法证明得出闭环系统半全局一致稳定,跟踪误差可通过调节控制器参数达到任意小.仿真结果表明:该方法能在简化控制设计过程的同时保证航迹倾角跟踪上预定轨迹,控制系统具有较强的自适应能力且对外界干扰具有一定的鲁棒性.     

硼酸金属化合物的制备及其电催化活性

采用电化学沉积法于室温、碱性条件下在氧化铟锡(ITO,Indium Tin Oxide)表面制备了硼酸钴(CoBi)、硼酸镍(NiBi)、硼酸锰(MnBi)、硼酸铑(RhBi)、硼酸钯(PdBi)几种无定形的硼酸金属化合物薄膜,并对其形貌和结构进行表征,结果表明几种薄膜均为无定形结构.将这几种硼酸金属化合物应用于电化学催化水氧化制氧,对比其催化活性,发现CoBi,NiBi,RhBi具有较高的催化性能,而MnBi和PdBi催化活性较低.进一步研究硼酸pH值对CoBi电催化水分解的影响.发现硼酸有利于金属化合物的制备,pH7~11范围内,HBO₃^2-作为质子受体含量逐渐增大,能接受放氧过程产生的质子,促进催化水分解过程的进行.所得催化剂可自我修复,实现循环利用.     

直接敏感地平的空天飞行器惯性/天文组合方法

传统的惯性/天文位置组合导航系统中,由于天文定位观测输出耦合了水平观测平台基准误差,往往存在系统噪声与量测噪声不完全独立的问题.针对此问题,分析了利用天文观测量修正惯性系下陀螺漂移的原理,提出了一种直接敏感地平进行天文解析定位及组合滤波的空天飞行器自主导航定位方案,并建立了相应的组合滤波模型.所提出的方法采用星敏感器和陀螺仪构造惯性基准,并在此基础上进行基于红外地平仪的天文定位解算,最后进行惯性/天文组合定位.该方案充分利用了星光敏感器在惯性系下姿态测量精度高的优点,并使惯性/天文组合定位滤波中状态噪声和观测噪声完全独立,仿真结果验证了该定位方法的有效性.     

一种改进的多目标粒子群优化算法

为了增强多目标粒子群优化算法的收敛性与多样性,提出一种改进的多目标粒子群算法.采用Kent映射对种群进行初始化,并将目标空间均匀划分为若干扇形区域;基于一种新的多样性和收敛性判定标准,选取合适的收敛性最优解和多样性最优解,并提出一种改进的粒子群更新公式进行全局搜索;采用聚类算法对外部种群与坐标轴夹角进行分析,维护外部种群.通过标准测试函数的仿真实验,与多目标优化算法基本MOPSO(Multi-objective Particle Swarm Optimization Algorithm)和NSGA-II(Nondominated Sorting Genetic Algorithm II)进行对比,结果表明了该改进算法的有效性.     

基于自动有限元建模的民机机翼结构布局优化

针对民用飞机中广泛采用的双梁式机翼结构,以机翼结构纵向构件(长桁)和横向构件(翼肋)的数量为参数生成机翼CAD模型,然后基于Patran的PCL(Patran Command Language)语言,根据整体模型分割、局部模型编号、局部网格控制、整体有限元生成的思路,实现了以纵向和横向构件的数量变化为基础自动进行机翼结构有限元模型的构建及分析,并将上述流程集成到机翼结构的布局优化中.最后参照某大型民用飞机的机翼外形尺寸建立了CAD模型,以机翼的静强度、刚度和蒙皮稳定性为约束,以机翼结构质量最低为目标,对上、下蒙皮长桁和翼肋数量进行了优化.优化后的布局使机翼结构质量降低了10.1%,表明了布局优化方法的有效性和可行性.