复合材料层合板的低能冲击损伤及剩余拉伸强度研究

针对复合材料层合板的冲击及冲击后的拉伸过程提出了一种全程分析方法。该方法应用三维逐渐累积损伤理论对层合板的冲击及冲击后含损伤层合板在拉伸载荷下损伤破坏的全过程进行分析,分析中没有对冲击后层合板的损伤状态做人为假设,而是把冲击后层合板的实际损伤状态直接用于剩余拉伸强度研究,从而不仅提高了最终失效载荷的预测精度,而且避免了为获得冲击后损伤状态参数所进行的大量试验,同时开发了模拟程序,该程序可以预测任意铺层角度、铺层厚度的层合板在冲击载荷及冲击后拉伸载荷下的逐渐损伤破坏过程和最终失效载荷。通过与已有文献结果进行比较,验证了方法及程序的正确性。     

基于全解耦奇偶方程的动态系统执行器故障检测与识别

给出了基于全解耦奇偶方程的动态系统执行器故障的检测与识别方法。讨论了全解耦奇偶向量的产生方法,给出了全解耦奇偶向量的存在条件,并结合卡尔曼滤波方法得到了故障模型参数的估计方法。最后给出了仿真实例。结果表明,全解耦奇偶方程方法能估计出动态系统执行器故障模型。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

扭叶片型面在线检测的研究

以汽轮机700mm扭叶片为对象,在XK5040数控机床上,进行了型面误差在线检测的研究。     

齿轮测量中心测头数据采集系统

提出了齿轮测量中心电感测头的新型数据采集系统,包括以集成开关构成的新型相敏检波器和以单片机为核心的数据采集系统,可以应用于各种电感信号的处理,具有较强的通用性。     

Zonal mean temperature, pressure, zonal wind and geopotential height as functions of latitude

The new zonal mean COSPAR International Reference Atmosphere (CIRA-86) of temperature, zonal wind, and geopotential/geometric height is presented. This data can be used as a function of altitude or pressure and has nearly pole-to-pole coverage (80°S-80°N) extending from the ground to approximately 120 km. Data sources and methods of computation are described; in general, hydrostatic and thermal wind balance are maintained at all levels and latitudes. As shown by a series of cross sectional plots, the new CIRA accurately reproduces most of the characteristic features of the atmosphere such as the equatorial wind and the general structure of the tropopause, stratopause, and mesopause.     

海上多平台传感器管理与控制的设计与实现

以实现对海上多平台传感器资源进行自动或半自动的协调管理控制为目标,设计了传感器管理与控制系统的功能结构,对组成系统的传感器信息管理、传感器组织管理、收发通信管理、传感器控制管理和传感器综合效能分析等功能模块进行了描述,采用基于效能函数的多传感器管理算法实现了传感器的任务规划与资源分配,并采用"集中管理,分散控制"的方式进行海上多平台传感器的管理与控制。     

空间○型圈密封泄漏率实验研究

通过对硅橡胶材料○型圈在模拟空间环境下的泄漏率实验，研究了空间密封中○型圈的压缩率、温度、○型圈的载荷衰减和原子氧辐射对其泄漏率的影响。实验结果发现，○型圈的泄漏率随○型圈压缩率的增大而减小，在－5－100℃的温度范围内，随温度的升高而增大，而○型圈的载荷衰减和原子氧辐射都对○型圈的泄漏率有不同程度的影响。