In-Flight Parity Vector Compensation for FDI

The performance of a failure detection and isolation (FDI) algorithm applied to a redundant strapdown inertial measurement unit (IMU) is limited by sensor errors such as input axis misalignment, scale factor errors, and biases. A techique is presented for improving the performance of FDI algorithms applied to redundant strapdown IMUs. A Kalman filter provides estimates of those linear combinations of sensor errors that affect the parity vector. These estimates are used to form a compensated parity vector which does not include the effects of sensor errors. The compensated parity vector is then used in place of the uncompensated parity vector to make FDI decisions. Simulation results are presented in which the algorithm is tested in a realistic flight environment that includes vehicle maneuvers, the effects of turbulence, and sensor failures. The results show that the algorithm can significantly improve FDI performance, especially during vehicle maneuvers.     

JK—20D型半导体激光治疗仪的研制

本文介绍了一种医用半导体激光的光路、恒流源及控制保护电路、温控、结构等方面的设计。该仪器的激光波长810nm,输出光功率0－468mW连续可调，可用于激光理疗和激光针灸等临床应用。     

低压铸造的计算机控制系统

低压铸造的控制得到人们的日趋重视。本文讨论的是以单片机为基础的低压铸造计算机控制系统。     

远程教学原理与课件制作方法

课件是一种 Ｗｅｂ 文档,所有 Ｗｅｂ 文档技术均可用于制作课件。本文阐述了远程教学系统的原理和课件实现方法,并实现了一个远程教学课件———讲授 Ｉｎｔｅｒｎｅｔ 的基本知识和 Ｈ Ｔ Ｍ Ｌ 语言。     

高速撞击充气压力容器前壁损伤数值模拟

针对空间碎片超高速撞击充气压力容器前壁损伤问题,应用非线性动力学分析软件AUTODYN采用拉格朗日方法对球形弹丸撞击球形压力容器前壁穿孔进行了数值模拟研究。在建模过程中通过对容器壁内侧施加压力边界条件来模拟由于内充气体的作用在容器壁内产生的应力场,并通过与试验结果的比较验证了数值模拟方法的有效性。在此基础上针对容器的内充气体压力、球形弹丸直径及撞击速度对充气压力容器前壁穿孔的影响进行了研究。结果表明:在一定的气体压力下,气体压力对压力容器前壁穿孔直径与穿孔形态的影响可以忽略不计;而撞击速度及弹丸直径对穿孔直径及穿孔形态有着较大的影响,当撞击速度大于3km/s时,撞击穿孔边缘开始有裂纹产生,并且穿孔直径与裂纹直径随着弹丸直径及撞击速度的增加而增大。利用压力容器前壁穿孔的数值模拟结果进行计算可以得出当容器受到撞击速度大于3km/s的弹丸撞击后比撞击速度不大于3km/s时更易发生破坏。     

单站发射多站接收的空间目标激光测距技术

激光测距作为空间目标测定轨精度最高的技术,对非合作目标的测量精度比微波雷达、光电探测等技术高1～2个数量级,非常有利于非合作目标的精密定位、轨道复核及精确编目,保障在轨空间飞行器的安全。激光在非合作目标表面会发生漫反射,返回光斑弥散、回波微弱,采用大口径望远镜接收系统是必要的。鉴于大口径望远镜研制难度大,提出基于单站发射多站接收的空间目标激光测距新方法,即采用多接收望远镜增加接收面积,实现目标测量能力提升。通过分析单站发射多站接收的激光测距技术特点,基于双望远镜系统开展空间合作目标测量实验,验证了多望远镜接收激光信号的可行性,为该测距技术发展奠定了实验基础。     

Spiking-free HGO-based DSC for flexible joint manipulator

The tracking control problem for Flexible Joint Manipulator Control System(FJMCS)with unmeasurable states is addressed in this paper. Firstly, a High-Gain Observer(HGO) is constructed to estimate the unmeasurable states and the uncertainties. Then, a Dynamic Surface Control(DSC) scheme is developed by using the estimation of HGO. The newly proposed controller has two advantages over the existing methods:(A) a novel Spike Suppression Function(SSF) is developed to avoid the estimation spike proble...     

Evaluating Sensor Orientations for Navigation Performance and Failure Detection

A study of the constraints imposed by the choice of particular orientations of redundant inertial sensors upon navigation system performance and the detection and identification of sensor failures in fault-tolerant inertial measurement units is presented. Figures of merit are derived for systematically evaluating alternative sensor orientations. The volume of the ellipsoid associated with the covariance matrix of estimation errors is used to rank sensor orientations in terms of navigation performance. Distance measures commonly used in hypothesis testing are used to rank sensor orientations in terms of the detectability of sensor failures. The application of these results is illustrated for configurations of four 2-degree-of-freedom gyroscopes.     

FDI Performance of Two Redundant Sensor Configurations

A geometrical interpretation of the generalized likelihood test (GLT) approach to sensor failue detection and isolation (FDI) is provided, and analytical expressions are derived to evaluate FDI performance parameters of interest. These results are used to determine the FDI performance which can be achieved when various FDI decision strategies are applied to two redundant sensor configurations: a conical array of five single degree-of-freedom sensors and a dodecahedron array of six single degree-of-freedom sensors.