采用RANS/LES混合方法研究分离流动

采用结合湍流模式和大涡模拟(LES)的混合方法数值模拟Aerospatial A-profile翼型以及细长椭球体大迎角分离流动。该类混合方法比较适于模拟分离流动:近壁区附体流动采用湍流模式,而远离物面分离区域内的大尺度运动则用LES方法。通过计算和实验结果的对比,混合方法切实可行并具有很大的发展潜力。     

Closed form algorithm of double-satellite TDOA+AOA localization based on WGS-84 model

In this paper, we consider the double-satellite localization under the earth ellipsoid model of the Wideband Geodetic System(WGS-84) using the Time Difference of Arrival(TDOA)and the Angle-of-Arrival(AOA).Several closed-form solution algorithms via the pseudolinearization of the measurement equations are presented to efficiently estimate the location.These algorithms include the Weighted Least Squares(WLS), the Constrained Total Least Squares(CTLS), and the Taylor-Series Iteration(TSI).Performance comparison of the proposed methods with the Cramér-Rao Lower Bound(CRLB) in the simulation is shown to demonstrate that the proposed algorithms are feasible and have stable performance.     

SiP陶瓷芯片水汽含量控制工艺方法研究

结合宇航级陶瓷封装芯片的特点和水汽控制要求,对SiP陶瓷封装工艺进行了研究,分析了陶瓷封装过程中产生水汽的各个因素,优化了封装生产工艺流程,增加了预烘转运过程下厂监制,保证了转运时间的工艺过程管控,通过试验验证了管控措施的有效性。     

Robust LPV modeling and control of aircraft flying through wind disturbance

This article deals with the disturbance attenuation control of aircraft flying through wind shear via Linear Parameter Varying(LPV) modeling and control method. A Flight Dynamics Model(FDM) with wind shear effects considered was established in wind coordinate system. An LPV FDM was built up based on function substitution whose decomposing function was optimized by Genetic Algorithm(GA). The wind disturbance was explicitly included in the system matrix of LPV FDM. Taking wind disturbance as external uncertainties, robust LPV control method with the LPV FDM was put forward. Based on ride quality and flight safety requirements in wind disturbance, longitudinal and lateral output feedback robust LPV controllers were designed respectively,in which the scheduling flight states in LPV model were actually dependent parameters in LPV control. The results indicate that LPV FDM can reflect the instantaneous dynamics of nonlinear system especially at the boundary of aerodynamic envelope. Furthermore, the LPV FDM also can approach nonlinear FDM's response in wind disturbance special flight. Compared with a parameter-invariant LQR controller designed with a small-disturbance FDM, the LPV controllers show preferable robustness and stability for disturbance attenuation.     

直升机的机组配合问题

良好的机组配合可以有效提高飞行的安全性。首先通过国外军用直升机发生的一些典型事故，分析了不良机组配合的具体表现，然后指出机组配合对于军用直升机的重要性。最后，借鉴国内外的有效经验，对机组如何进行良好配合并提高安全性提出了一些建议。     

An investigation on adaptively machining the leading and tailing edges of an SPF/DB titanium hollow blade using free-form deformation

Titanium hollow blades are characterized with lightweight and high structural strength, which are widely used in advanced aircraft engines nowadays. Superplastic forming/diffusion bonding (SPF/DB) combined with numerical control (NC) milling is a major solution for manufacturing titanium hollow blades. Due to the shape deviation caused by multiple heat and pressure cycles in the SPF/DB process, it is hard to manufacture the leading and tailing edges by the milling process. This paper presents a new adaptive machining approach using free-form deformation to solve this problem. The actual SPF/DB shape of a hollow blade was firstly inspected by an on-machine measurement method. The measured point data were matched to the nominal SPF/DB shape with an improved ICP algorithm afterwards, by which the point-pairs between the measurement points and their corresponding points on the nominal SPF/DB shape were established, and the maximum modification amount of the final nominal shape was constrained. Based on the displacements between the point-pairs, an accurate FFD volume was iteratively calculated. By embedding the final nominal shape in the deformation space, a new final shape of the hollow blade was built. Finally, a series of measurement and machining tests was performed, the results of which validated the feasibility of the proposed adaptive machining approach.     

Design and performance analysis of position-based impedance control for an electrohydrostatic actuation system

Electrohydrostatic actuator (EHA) is a type of power-by-wire actuator that is widely implemented in the aerospace industry for flight control, landing gears, thrust reversers, thrust vector control, and space robots. This paper presents the development and evaluation of position-based impedance control (PBIC) for an EHA. Impedance control provides the actuator with compliance and facilitates the interaction with the environment. Most impedance control applications utilize electrical or valve-controlled hydraulic actuators, whereas this work realizes impedance control via a compact and efficient EHA. The structures of the EHA and PBIC are firstly introduced. A mathematical model of the actuation system is established, and values of its coefficients are identified by particle swarm optimization. This model facilitates the development of a position controller and the selection of target impedance parameters. A nonlinear proportional-integral position controller is developed for the EHA to achieve the accurate positioning requirement of PBIC. The controller compensates for the adverse effect of stiction, and a position accuracy of 0.08 mm is attained. Various experimental results are presented to verify the applicability of PBIC to the EHA. The compliance of the actuator is demonstrated in an impact test.     

Brazing of C/C composite and Ti-6Al-4V with graphene strengthened AgCuTi filler: Effects of graphene on wettability,microstructure and mechanical properties

Graphene nanosheets(GNSs) strengthened AgCuTi composite filler(AgCuTi_G) was used to braze C/C composite and Ti-6Al-4V. The effects of GNSs on the wettability of AgCuTi_G filler on the C/C composite surface and the interfacial microstructure and mechanical properties of brazed joints were investigated. The results indicate that the addition of GNSs reduced the wettability of AgCuTi_G. The interfacial microstructure of brazed joints evolved with the addition of GNSs, where Ti_3Cu_4 and TiCu_4 were converted to TiCu and the thickness of the reaction layer adjacent to the base material decreased. The maximum shear strength of joints brazed at 0.3 wt% GNSs was 23.3 MPa(880℃/10 min). Further adding GNSs deteriorated the shear strength of the joints. Fracture of the joints occurred in the C/C composite substrate and the TiC layer adjacent to C/C composite.     

An intelligent algorithm for coherent sound source localization based on a strong tracking filter

Background noise is inevitable when sensor arrays are used for aeroacoustic measurements in wind tunnels. The direct removal of background noise, however, would affect the measurement accuracy. In particular, the existing array signal processing algorithms are either invalid or inefficient for removing the noise that is coherent with the signal of interest. In this paper, an intelligent algorithm is developed to localize the coherent sound sources and background noise in real time by iteratively checking the collected data from the array. The proposed method can automatically adjust the suboptimal fading factor to extract useful information as much as possible in residual sequence. This algorithm is tested in simulations and then demonstrated in an experiment.Compared to the two existing methods, the results indicate that the new method has a good phase-shift tracking ability and rapid estimation-error convergence speed, and can achieve an acceptable performance even for low-cost acoustic sensors. Overall, the proposed method should assist array beamforming and hence benefit aeroacoustic measurement.     

基于DSP的二维运动机构位置测量与控制技术

电机位置测量是伺服控制的关键技术。在分析二维运动机构光栅尺输出信号的基础上,设计DSP对光栅尺信号进行接收和数据处理,并确定采样周期,在PID算法的基础上提出二维运动机构超声波电机的运动控制方案,从而实现了二维运动机构的高精度、高响应控制。