制造误差对气体静压轴承涡流力矩影响分析方法研究

 采用有限元方法研究了制造误差对狭缝节流气体静压轴颈—止推轴承的涡流力矩的影响。对于轴颈—止推相连结构的气体轴承,通过相容变换进行统一编程计算;在离散化过程中,利用加权余量法将二阶偏微分方程降低一阶,放松了对插值函数连续度的要求,便于借助有限元技术分析狭缝节流气体静压轴承的流场参数。分析了狭缝气膜宽度误差和轴颈圆度误差对涡流力矩的影响,以及轴颈的不同安装角度、偏心等因素对涡流力矩的影响。经对比验证,有限元计算结果与实测结果基本一致,研究结果对于气体静压轴颈—止推轴承的设计、装配优化和性能预测有重要指导意义。     

用VXI仪器组建通用雷达装备自动测试系统

武器装备的发展对测试系统提出了越来越高的要求。本文介绍了基于VXI总线卡式仪器和GPIB仪器组建的通用雷达装备自动测试系统的硬件结构，说明了测试软件的体系结构和设计方法。     

稳态等离子体推力器磁场设计与数值分析

首先分析了稳态等离子体推力器性能对磁场的要求，据此介绍了磁路系统的工程设计原则和方法；然后，采用ANSYS大型有限元分析软件对一个具体的稳态等离子体推力器在额定工况下的磁场进行了计算，获得了满意的结果，通过对结果的分析获得了对有关现象的直观深入的认识，为所计算具体推力器的改进设计提供了线索；同时，也证实了以ANSYS为软件平台的稳态等离子体推力器磁路系统计算机数值仿真辅助设计的可行性和有效性。     

加速度对含铝复合推进剂瞬时燃速的影响

本文研究了加速度向量对含铝复合推进剂瞬时燃速的影响.其中包括加速度大小和方向对推进剂瞬时燃速增加率的影响和在同一加速度条件下铝粉粒径、铝粉含量和铝粉形状对瞬时燃速增加率的影响.此外,还对研究结果进行了分析和讨论.     

低浸渗压力制备短纤维增强铝硅合金复合材料

利用液态浸渗技术制备了氧化铝纤维增强铝基复合材料。结果表明，在低压下使液态合金浸渗纤维预制件制备铝基复合材料是可行的，在浸渗过程中，液态合金的温度对浸渗压力有较大影响。所制备的复合材料组织均匀，基体中的共晶组织可依附在纤维表面形核生长。     

曲面不锈钢/微晶玻璃层状复合材料的设计制备

设计制备了与1Cr17和0Cr18Ni9不锈钢匹配的CaO-Al2O3-SiO2(CAS)系和BaO-Al2O3-SiO2(BAS)系微晶玻璃,研究了微晶玻璃的各项理化性能。利用流延法制备微晶玻璃生带,以此制备符合曲面不锈钢/微晶玻璃层状复合材料,并对复合材料相关性能进行测试。结果表明,所设计制备的玻璃经850℃、30min热处理后可形成线胀系数与对应不锈钢匹配的微晶玻璃,且具有适宜弯曲强度和较低介电常数、介质损耗;由此制备的曲面不锈钢/微晶玻璃层状复合材料具有良好的绝缘性能、结合强度和抗热冲击性能。     

多层钎焊结构件超声C扫描信号特征分析

对多层钎焊件内层焊缝检测中产生的多重声束路径叠加现象进行了详细分析,并用计算机模拟超声检测中的叠加信号,总结出对等厚薄板钎焊缝阵结构内层焊缝的检测方法及C扫描时信号门放置的合理位置,并且在实际检测中验证了该方法的正确性.     

直升机机动飞行仿真的气动建模及试验研究

 建立了适用于直升机机动飞行仿真的动力学模型。为了提高模型的真实度,着重通过瞬态操纵实验研究建立了旋翼非定常气动模型;又通过旋翼/ 机身气动干扰试验研究,并运用神经网络技术建立了一种新的机身气动力模型。使用该仿真模型做出的UH260A 直升机仿真计算结果与飞行试验数据符合良好。     

Robust space-time adaptive processing for airborne radar in nonhomogeneous clutter environments

Space-time adaptive processing (STAP) holds tremendous potential for the new generation airborne surveillance radar, in which the phased array antennas and pulse Doppler processing mode are adopted. A new STAP approach using the multiple-beam and multiple Doppler channels is presented here for airborne phased array radar. The approach with space-time multiple-beam (STMB) architecture is robust to array errors and has very low system degrees of freedom (DOFs). Hence, it has low sample support requirement and it is very suitable for the practical planar phased array radar under nonhomogeneous clutter environments. Meanwhile, a new nonhomogeneous detector (NHD) based on the correlation dimension (CD) is also proposed here, which is used as an effective method to screen tracing data prior to detection processing. It can further improve the performance of the STAP approach in the severely nonhomogeneous clutter environments. Therefore, a scheme that incorporates the correlation dimension nonhomogeneity detector (CD-NHD) with the STMB is recommended, which we term CD-NHD-STMB. The experimental simulation results indicate that: 1) the STMB processor is robust to array element error and has high performance under nonhomogeneous clutter environments; 2) the CD-NHD is also effective on the nonhomogeneous clutter. As a result, the CD-NHD-STMB scheme is robust to array element error and nonhomogeneous clutter, and therefore available for airborne phased array radar applications.     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.