基于全解耦奇偶方程的动态系统执行器故障检测与识别

给出了基于全解耦奇偶方程的动态系统执行器故障的检测与识别方法。讨论了全解耦奇偶向量的产生方法,给出了全解耦奇偶向量的存在条件,并结合卡尔曼滤波方法得到了故障模型参数的估计方法。最后给出了仿真实例。结果表明,全解耦奇偶方程方法能估计出动态系统执行器故障模型。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

飞机吊舱热系统计算机仿真研究

建立了电子吊舱热系统仿真模型,并利用仿真软件对其进行动态仿真研究,得到了吊舱冷负荷及主要温度参数沿一定飞行包线的变化情况, 辅助完成了制冷系统的选型及校核检验工作,并为吊舱的结构参数优化提出了合理性建议.研究结果表明动态仿真研究为吊舱制冷系统的选型及设计提供了先进的计算分析工具.     

扭叶片型面在线检测的研究

以汽轮机700mm扭叶片为对象,在XK5040数控机床上,进行了型面误差在线检测的研究。     

齿轮测量中心测头数据采集系统

提出了齿轮测量中心电感测头的新型数据采集系统,包括以集成开关构成的新型相敏检波器和以单片机为核心的数据采集系统,可以应用于各种电感信号的处理,具有较强的通用性。     

Zonal mean temperature, pressure, zonal wind and geopotential height as functions of latitude

The new zonal mean COSPAR International Reference Atmosphere (CIRA-86) of temperature, zonal wind, and geopotential/geometric height is presented. This data can be used as a function of altitude or pressure and has nearly pole-to-pole coverage (80°S-80°N) extending from the ground to approximately 120 km. Data sources and methods of computation are described; in general, hydrostatic and thermal wind balance are maintained at all levels and latitudes. As shown by a series of cross sectional plots, the new CIRA accurately reproduces most of the characteristic features of the atmosphere such as the equatorial wind and the general structure of the tropopause, stratopause, and mesopause.     

GPS定位数据在海洋一号卫星中的应用与比较

简要介绍了海洋一号卫星星载GPS接收机的定位原理、流程和应用，探讨了一种在轨定位结果的确认和互验方法．借助于卫星工具包软件(STK)，利用NASA网站公布的HY-1卫星两行根数(TLE)进行卫星轨道推算，生成星下点位置，并与相应时刻星载GPS接收机实测数据得到的星下点位置进行比较，由此得到两种方法定位结果之间的偏差，用实际在轨数据验证了两者的位置符合程度．     

软件可靠性预计方法研究及实现

软件可靠性评估可以估计和预计软件可靠性水平.为了解决软件可靠性预计过程中存在的问题,提出了一种软件可靠性预计方法.该方法通过分析和改进模型的预计质量来选择模型进行预计,对模型预计质量的分析使用了U图、Y图和对数PLR图,再标定法和组合法被用于改进模型的预计质量.在该方法的基础上开发了软件可靠性分析工具,此工具可以进行多种软件可靠性模型的原始预计、预计质量分析和改进原始模型的预计质量.