1990年中国返回式卫星的微重力水平监测

叙述了1990年中国返回式卫星采用的微重力测量系统概况、微重力测量数据的处理方法、微重力测量结果与分折。指出:这是国内首次空间微重力水平监测;研制的JS05-1A 微重力测量仪动态精度优于4μg,响应时间6ms,达到了国际同类仪器的先进水平;该仪器为指导优化空间晶体生长的微重力环境及了解卫星工作状况提供了有力手段。通过对该卫星微重力水平监测所获得的73505对数据进行分折,发现有效载荷动作是影响卫星微重力水平的主要因素,为10~(-4)g 量级;有效载荷不动作时,除1.23%的时间存在10~(-4)g量级不明干扰外,有97.6%的时间微重力的绝对值小于4×10~(-5)g,仅O.3%的时间在10~(-4)g 量级。     

环路热管内工质流动特性的研究

由于环路热管（LHP）具有高传热性能、远距离传输热量、优良的控温特性和管路的可任意弯曲、安装方便等特点，使LHP在航天热控领域有着广泛的应用前景。文章对LHP内工质的流动压力降进行了分析和计算；对毛细芯所能提供的最大蒸发传热能力进行了预测，并结合实验研究综合分析了毛细芯结构对LHP性能的影响。     

半浮区液桥自由面振荡特征

使用一套双路同步显微放大录像及图像处理系统,研究了夹角为90°的两个竖直剖面沿轴向不同高度液桥自由表面的位移振荡,得到轴向不同高度上的环向相位差,观测到在振荡周期内液桥表面轮廓线在不同时刻均不相交的特点。实验结果表明,液桥自由面振荡除具有径向扰动及轴向振荡变化外,还存在环向波动变化。根据实验结果,讨论了环向波动基本变化规律以及本实验在测量精度和测量误差方面存在的问题。     

同无黑子耀斑相协的微波爆发机制的探讨

1980—1984年期间,我们在云南天文台9375MHz,3653MHz和2902 HHz三个波段的射电观测资料中,查到11组微波爆发与无黑子耀斑相伴随。本文研究了这些爆发与耀斑的大气层高度,射电爆发类型以及通过落进峰值流量-时间图的位置,确认出爆发机制是活动区中作麦克斯韦分布电子的热轫致辐射。     

工件表面轮廓均方根斜率的光散射测量

描述并确定具有明显纹理粗糙表面均方根斜率的光散射技术(均方根斜率是联合表面轮廓高度和波长特性的混合参数)。称为散射光锥法(The scattered light-conemethod)的该技术是基于激光角散射检测阵列(DALLAS——Defector Array for Laser LishtAngular Scattering),它用于测量粗糙表面散射光角分布的仪器。均方根斜率是从DALLAS光散射图象的角宽得到的。一般可以发现角宽(即估计的均方根斜率)对光的入射角和散射角变化相当大时是不敏感的。这些结果与表面材料无关,并且对正弦和随机粗糙表面都是有效的。介绍了散射光锥法的测量原理、实验、数据分析和几点结论。     

Thermal-Fluid Coupling Simulation of Ventilation Cooling System of Generator Based on FLOWMASTER

By taking a 2.3 MW double-fed asynchronous generator as an example,a new method for fast simulation analysis of ventilation cooling system inside generator is proposed based on the one-dimensional simulation software FLOWMASTER.The thermal-fluid coupling simulation model of ventilation cooling system inside generator is established.Under the stable running state of the generator,the flow velocity distribution and temperature rise of the key parts of the generator are analyzed.The results prove that the ventilation structure design of the generator meets the temperature rise limit.The simulation results are compared with the theoretical calculation results and the experimental results,which verify the correctness of the thermal-fluid coupling simulation method proposed in this paper.     

蝴蝶翼面形状对绕流结构的影响

蝴蝶的扑翼飞行因其相对翼展较大、扑翼频率低等特点引起广泛关注,尤其是具有越洋迁徙特性的蝴蝶更是备受瞩目。本文以天堂鸟翼凤蝶和黑脉金斑蝶这两种长距离迁徙蝴蝶作为研究原型,利用氢气泡流动显示技术研究这两种不同外形的蝴蝶翼面绕流结构随迎角的变化。在相同的实验条件下,两种模型翼面绕流均出现前缘涡、翼尖涡等流动结构,且绕流结构随迎角的变化趋势基本相同。但由于翼面外形的不同,两种模型在前缘涡的形态、强度及后翼面翼尖绕流结构等方面表现出一定的差异。     

高阶面元法计算多段翼型之位流

本文给出了一种求解多段翼型位流的高阶面元法。面元和奇点的分布分别采用了二阶和三阶的形式。由于高阶面元法较为精确地反映了绕流体的几何形状和奇点表面分布,本文给出了比低阶面元法更为精确的解,并且消除了低阶面元法计算中经常出现的翼型后缘处解的波动。     

Dynamic characteristics analysis of deployable space structures considering joint clearance

The clearance in joints influences the dynamic stability and the performance of deployable space structures (DSS). A virtual experimental modal analysis (VEMA) method is proposed to deal with the effects of joint clearance and link flexibility on the dynamic characteristics of the DSS in this paper. The focus is on the finite element modeling of the clearance joint, VEMA and the modal parameters identification of the DSS. The finite element models (FEM) of the clearance joint and the deployable structure are established in ANSYS. The transient dynamic analysis is conducted to provide the time history data of excitation and response for the VEMA. The fast Fourier transform (FFT) technique is used to transform the data from time domain to frequency domain. The frequency response function is calculated to identify the modal parameters of the deployable structure. Experimental verification is provided to indicate the VEMA method is both a cost and time efficient approach to obtain the dynamic characteristics of the DSS. Finally, we analyze the effects of clearance size and gravity on the dynamic characteristics of the DSS. The analysis results indicate that the joint clearance and gravity strongly influence the dynamic characteristics of the DSS.