An analysis of low-frequency component in microacceleration measurements made onboard the <Emphasis Type="Italic">Foton M-2</Emphasis> satellite

The low-frequency component is investigated in the data of measurements performed onboard the Foton M-2 satellite with the three-component accelerometer TAS-3. Investigations consisted in comparison of this component with its calculated analog found from a reconstruction of the satellite’s attitude motion. The influence of the Earth’s magnetic field on the accelerometer readings is discovered by way of spectral analysis of the functions representing the results of determining the low-frequency microacceleration by two methods. After making correction for this influence, the results obtained by these two methods coincided within a root-mean-square error of less than 10^?6 m/s².     

Influence of Body Waves,Instrumentation Resonances,and Prior Assumptions on Rayleigh Wave Ellipticity Inversion for Shallow Structure at the InSight Landing Site

Based on an updated model of the regolith’s elastic properties, we simulate the ambient vibrations background wavefield recorded by InSight’s Seismic Experiment for Interior Structure (SEIS) on Mars to characterise the influence of the regolith and invert SEIS data for shallow subsurface structure. By approximately scaling the synthetics based on seismic signals of a terrestrial dust devil, we find that the high-frequency atmospheric background wavefield should be above the self-noise of SEIS’s SP sensors, even if the signals are not produced within 100–200 m of the station. We compare horizontal-to-vertical spectral ratios and Rayleigh wave ellipticity curves for a surface-wave based simulation on the one hand with synthetics explicitly considering body waves on the other hand and do not find any striking differences. Inverting the data, we find that the results are insensitive to assumptions on density. By contrast, assumptions on the velocity range in the upper-most layer have a strong influence on the results also at larger depth. Wrong assumptions can lead to results far from the true model in this case. Additional information on the general shape of the curve, i.e. single or dual peak, could help to mitigate this effect, even if it cannot directly be included into the inversion. We find that the ellipticity curves can provide stronger constraints on the minimum thickness and velocity of the second layer of the model than on the maximum values. We also consider the effect of instrumentation resonances caused by the lander flexible modes, solar panels, and the SEIS levelling system. Both the levelling system resonances and the lander flexible modes occur at significantly higher frequencies than the expected structural response, i.e. above 35 Hz and 20 Hz, respectively. While the lander and solar panel resonances might be too weak in amplitude to be recorded by SEIS, the levelling system resonances will show up clearly in horizontal spectra, the H/V and ellipticity curves. They are not removed by trying to extract only Rayleigh-wave dominated parts of the data. However, they can be distinguished from any subsurface response by their exceptionally low damping ratios of 1% or less as determined by random decrement analysis. The same applies to lander-generated signals observed in actual data from a Moon analogue experiment, so we expect this analysis will be useful in identifying instrumentation resonances in SEIS data.     

Planetary Protection and the astrobiological exploration of Mars: Proactive steps in moving forward

Future efforts towards Mars exploration should include a discussion about the effects that the strict application of Planetary Protection policies is having on the astrobiological exploration of Mars, which is resulting in a continued delay in the search for Martian life. As proactive steps in the path forward, here we propose advances in three areas. First, we suggest that a redefinition of Planetary Protection and Special Regions is required for the case of Mars. Particularly, we propose a definition for special places on Mars that we can get to in the next 10–20?years with rovers and landers, where try to address questions regarding whether there is present-day near-surface life on Mars or not, and crucially doing so before the arrival of manned missions. We propose to call those special places “Astrobiology Priority Exploration” regions (APEX regions). Second, we stress the need for the development of robotic tools for the characterization of complex organic compounds as unequivocal signs of life, and particularly new generations of complex organic chemistry and biosignature detection instruments, including advances in DNA sequencing. And third, we advocate for a change from the present generation of SUV-sized landers and rovers to new robotic assets that are much easier to decontaminate such as microlanders: they would be very small with limited sensing capabilities, but there would be many of them available for launch and coordination from an orbiting platform. Implementing these changes will help to move forward with an exploration approach that is much less risky to the potential Mars biosphere, while also being much more scientifically rigorous about the exploration of the “life on Mars” question – a question that needs to be answered both for astrobiological discovery and for learning more definitive lessons on Planetary Protection.     

The earth explorer candidates: Nine focused missions, all satellite classes

The size of a satellite should follow naturally from the mission requirements taking into account implementation constraints, notably the choice of launcher and programmatics. The key concepts are “focused mission” and “maximum return for the investment”. The nine candidates proposed for the ESA Earth Explorer programme of research missions form a good representative set to illustrate a discussion of satellite classes. These focused missions lead to satellites from less than 100 kg and 100 W, to more than 2000 kg and 2 kW of power generation and include flights of opportunity and precursor experiments.     

Proton Events and X-ray Flares in the Last Three Solar Cycles

A database joining the available information about proton enhancements near the Earth and their possible solar sources is organized on the basis of proton measurements of the GOES and IMP-8 satellites, the data of neutron monitors, and GOES X-ray measurements. One thousand one hundred and forty-four proton events with energy > 10 MeV have been selected in the period from 1975 to 2003. More than a half of these events can be reliably related to X-ray solar flares. A statistical analysis shows the probability of observing solar protons near the Earth and their maximum flux value to be strongly dependent on the importance of a flare and its heliolongitude. Proton events are recorded after all suitably located (western) flares with X-ray importance > X5. The heliolongitude of a flare predetermines the character of the time profile of proton events in many respects. The relationship of proton events with the other characteristics of flares is established. The flares associated with proton enhancements are characterized by longer duration, slower rise to the X-ray maximum, smaller temperature, and larger length of the X-ray loops.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 3, 2005, pp. 171–185.Original Russian Text Copyright © 2005 by Belov, Garcia, Kurt, Mavromichalaki.     

Studying the positioning accuracy for dynamic (moving) objects with the use of multifrequency oblique-incidence sounding of ionospheric radio channels by chirp signals

The paper presents the methods and algorithms for positioning the dynamic (moving) objects using the oblique-incidence ionospheric sounding by chirp signals. Full-scale experiments have been performed to determine a distance to an object and its location.     

Hard X-Ray/Soft Gamma-Ray Experiments and Missions: Overview and Prospects

Starting from 1960s, a great number of missions and experiments have been performed for the study of the high-energy sky. This review gives a wide vision of the most important space missions and balloon experiments that have operated in the 10–600 keV band, a crucial window for the study of the most energetic and violent phenomena in the Universe. Thus it is important to take the stock of the achievements to better establish what we have still to do with future missions in order to progress in this field, to establish which are the technologies required to solve the still open issues and to extend our knowledge of the Universe.     

The Noise Model of the SEIS Seismometer of the InSight Mission to Mars

The SEIS (Seismic Experiment for Interior Structures) instrument on board the InSight mission to Mars is the critical instrument for determining the interior structure of Mars, the current level of tectonic activity and the meteorite flux. Meeting the performance requirements of the SEIS instrument is vital to successfully achieve these mission objectives. The InSight noise model is a key tool for the InSight mission and SEIS instrument requirement setup. It will also be used for future operation planning. This paper presents the analyses made to build a model of the Martian seismic noise as measured by the SEIS seismometer, around the seismic bandwidth of the instrument (from 0.01 Hz to 1 Hz). It includes the instrument self-noise, but also the environment parameters that impact the measurements. We present the general approach for the model determination, the environment assumptions, and we analyze the major and minor contributors to the noise model.     

The InSight Mars Lander and Its Effect on the Subsurface Thermal Environment

The 2018 InSight (Interior Exploration using Seismic Investigations, Geodesy and Heat Transport) Mission has the mission goal of providing insitu data for the first measurement of the geothermal heat flow of Mars. The Heat Flow and Physical Properties Package (HP³) will take thermal conductivity and thermal gradient measurements to approximately 5 m depth. By necessity, this measurement will be made within a few meters of the lander. This means that thermal perturbations from the lander will modify local surface and subsurface temperature measurements. For HP³’s sensitive thermal gradient measurements, this spacecraft influence will be important to model and parameterize. Here we present a basic 3D model of thermal effects of the lander on its surroundings. Though lander perturbations significantly alter subsurface temperatures, a successful thermal gradient measurement will be possible in all thermal conditions by proper (\(>3~\mbox{m}\) depth) placement of the heat flow probe.