改进的电热除冰系统的仿真方法

建立了电热除冰系统矩形微段的二维简化物理模型，采用焓法模型建立相变导热问题的微分控制方程，用控制容积法对该模型的控制方程及其边界、初始条件进行离散，使用块修正技术对原有的离散方程组的求解方法进行了改进，得到各个时刻的温度分布及冰的融解情况。计算结果与国外文献结果吻合，验证了改进的算法和程序的正确性。并计算分析了时间步长的选择、网格的划分对计算结果的影响。     

U71Mn干线钢轨开裂原因及热处理工艺分析

针对U71Mn60Kg/m干线钢轨使用过程中轨端发生开裂损伤现象,采用硬度检测分析及金相显微技术等手段对所取试样进行了宏观和微观的组织分析。探讨了一些新的淬火技术在高速铁路用钢轨轨端表面淬火中的应用。结果表明:原钢轨轨端表面淬火工艺不当,淬硬层厚度不够,层深不均且表层硬度相差较大,使钢轨轨端机械性能尤其是疲劳强度无法满足干线铁路高速运行列车对钢轨的使用要求,造成开裂损伤。较合理的工艺应采用多喷嘴式仿形喷头加热,并控制好加热后的冷却及回火工艺。采用工频感应热处理工艺也能得到较好的显微组织和性能。     

基础隔震体系地震反应特征与方案优选

隔震建筑采用水平剪切型模型,隔震体系为橡胶垫、滑移和并联基础隔震系统,隔震层模型采用双线性滞回模型。研究了在不同隔震层屈服剪力和隔震周期时,不同隔震系统对结构地震反应的影响。研究表明,对于规则型隔震结构,经合理设计的并联隔震结构兼具橡胶垫和滑移隔震体系的优点,为优选方案。以一实际工程为例,分析了竖向不规则隔震结构的地震反应特点。研究表明,对竖向不规则结构,橡胶垫隔震体系为优选方案。     

火星着陆自主导航方案研究进展

火星着陆导航技术是火星着陆过程的核心技术之一。围绕火星着陆环境特点与导航技术遇到的挑战,分析了目前火星着陆过程的导航能力和自主导航的发展趋势,并针对火星着陆过程的特殊性和导航需求,概述了火星着陆过程各阶段自主导航方案的研究现状与进展。进而从导航方案设计与配置、导航模型建立与仿真、导航方案性能分析等方面,对自主导航方案的最新研究进展进行了分析,并在火星着陆全过程自主导航方案综合仿真的基础上,获得了满足火星定点着陆要求的各阶段交接点应满足的导航精度。最后,基于目前技术现状和发展趋势,提出了构建"递进式三阶段"火星着陆自主导航方案的设想,可为未来火星着陆自主导航方案的设计与论证提供参考。     

正反顺序加载下安装边螺栓预紧力分散度的数值模拟与试验验证

在航空发动机机匣安装边装配过程中,不同位置螺栓之间会产生弹性交互作用,不同加载方案会使装配后的螺栓预紧力存在一定的分散度。针对这一问题,建立了3层带止口机匣安装边3维接触有限元模型,研究不同加载方案下螺栓预紧力的施加方法。基于有限元模型数值模拟了3层机匣安装边分别在顺序加载方案、交叉加载方案和正反顺序2轮加载方案下螺栓预紧力的分散度。搭建了相应的试验装置,分别对3种加载方案的预紧力分散度进行试验验证。结果表明：采用正反顺序2轮加载后的螺栓预紧力分散度最小,在3层止口机匣安装边上采用正反顺序2轮加载方案后的螺栓预紧力分散度较小,在有限元仿真中螺栓预紧力分散度为2.43%,在试验中螺栓预紧力分散度为4.98%。采用此方案加载后,止口机匣安装边能达到更好的密封效果和较好的刚度对称性。     

透平机械动密封动力特性数值方法研究

密封动力特性系数是评价透平机械转子稳定性的重要参数。对现有密封动力特性数值方法进行了综述,为了比较分析不同的密封动力特性数值方法,分别建立了基于控制体方法的双控体求解模型和基于CFD方法的稳态旋转坐标系与瞬态转子平动、转子单/多频椭圆涡动求解模型,综合比较分析了控制体法、CFD稳态旋转坐标系法和CFD瞬态平动法、单/多频法之间的差异以及适用范围,研究了转子涡动频率对密封气流力和动力特性系数的影响。研究结果表明:控制体法求解速度较快,但求解精度较低,稳态旋转坐标系法只适用于转子做小轨迹同心涡动的求解模型,瞬态平动法求解速度较慢;瞬态单/多频法考虑了转子的涡动频率,更符合密封的实际工作情况;应用瞬态单/多频法得到的密封气流力变化频率与转子涡动频率相同,但气流力的相位滞后于转子涡动位移的相位;密封的直接刚度系数随着转子涡动频率的增加而增大,交叉刚度系数和阻尼系数的绝对值随着转子涡动频率的增加而减小。     

含金属相变材料温控组件的研究

研究使用一种含有金属相变材料（Phase Change material,PCM）的温控组件（Thermal Control Component,TCC）对航天器上的有效载荷进行温度控制。通过对载荷的温控需求分析,设计并制备了以Ga-Sn合金为PCM的TCC,并通过地面模拟实验对TCC的温控性能进行测试。实验结果表明这种含有Ga-Sn合金的TCC满足载荷的温控需求。最后在仿真软件中建立了TCC的相变传热仿真模型用于预测TCC的温控性能。结果表明：仿真模型计算所得结果与实验结果基本一致,可用于预测TCC的温控性能。     

An innovative navigation scheme of powered descent phase for Mars pinpoint landing

Pinpoint landing (within 100 m from the target) is essential for future Mars exploration missions. This paper deals with one aspect of the pinpoint landing architecture—the navigation performance improvement during the powered descent phase, and proposes an innovative navigation scheme to obtain the vehicle complete and accurate states. On the basis of dead reckoning relying on the Inertial Measurement Unit, measurements of the Integrated Doppler Radar are adopted to correct the vehicle velocity and altitude. Distance between the vehicle and one Mars Orbiter as well as their line-of-sight relative velocity is measured by a radio sensor, and integrated in the filter to correct the vehicle horizontal position. The innovative navigation system is based on an Extend Kalman Filter. Two observation schemes are developed. One considers measurements of the Integrated Doppler Radar and radio range measurement. Another further considers radio velocity measurement. The performance of the innovative navigation scheme is greatly influenced by the position of the Mars Orbiter with respect to the target. Stochastic analyses are performed to obtain optimal locations of Mars Orbiter. Finally, the innovative navigation scheme performances are assessed through stochastic simulations. Its performance improvements are demonstrated by comparison with the Integrated Doppler Radar only navigation scheme.     

行星着陆探测中的动力学与控制研究进展

着陆探测是获取行星特性和科学数据最直接、最有效的途径,也是目前技术难度最大、最为复杂的探测方式。在行星着陆探测过程中,动力学与控制是影响任务成败的关键因素之一。文章首先分析了行星着陆探测动力学与控制研究所面临的挑战与难题;然后,针对火星和小行星的着陆探测,重点分析了火星着陆进入段和下降段所涉及的动力学与控制,小行星附着探测动力学建模与制导控制的研究现状与关键问题;最后,提出了我国在行星着陆探测动力学与控制领域的未来重点发展方向。     

Study on O2 generation and CO2 absorption capability of four co-cultured salad plants in an enclosed system

The ability to generate O₂ and absorb CO₂ of several co-cultured vegetable plants in an enclosed system was studied to provide theoretical reference for the future man-plant integrated tests. Four kinds of salad plants (Lactuca sativa L. var. Dasusheng, Lactuca sativa L. var. Youmaicai, Gynura bicolor and Cichorium endivia L.) were grown in the CELSS Integration Test Platform (CITP). The environmental factors including O₂ and CO₂ concentration were continuously monitored on-line and the plant biomass was measured at the end of the test. The changing rules of O₂ and CO₂ concentration in the system were basically understood and it was found that the O₂ generated by the plants could satisfy the respiratory needs of 1.75 persons by calculation. It was also found that the plants could absorb the CO₂ breathed out by 2 persons when the light intensity was raised to 550 mmol m⁻² s⁻¹ PPF. The results showed that the co-cultured plants hold good compatibility and excellent O₂-generating and CO₂-absorbing capability. They could also supply some fresh edible vegetable for a 2-person crew.