U71Mn干线钢轨开裂原因及热处理工艺分析

针对U71Mn60Kg/m干线钢轨使用过程中轨端发生开裂损伤现象,采用硬度检测分析及金相显微技术等手段对所取试样进行了宏观和微观的组织分析。探讨了一些新的淬火技术在高速铁路用钢轨轨端表面淬火中的应用。结果表明:原钢轨轨端表面淬火工艺不当,淬硬层厚度不够,层深不均且表层硬度相差较大,使钢轨轨端机械性能尤其是疲劳强度无法满足干线铁路高速运行列车对钢轨的使用要求,造成开裂损伤。较合理的工艺应采用多喷嘴式仿形喷头加热,并控制好加热后的冷却及回火工艺。采用工频感应热处理工艺也能得到较好的显微组织和性能。     

含金属相变材料温控组件的研究

研究使用一种含有金属相变材料（Phase Change material,PCM）的温控组件（Thermal Control Component,TCC）对航天器上的有效载荷进行温度控制。通过对载荷的温控需求分析,设计并制备了以Ga-Sn合金为PCM的TCC,并通过地面模拟实验对TCC的温控性能进行测试。实验结果表明这种含有Ga-Sn合金的TCC满足载荷的温控需求。最后在仿真软件中建立了TCC的相变传热仿真模型用于预测TCC的温控性能。结果表明：仿真模型计算所得结果与实验结果基本一致,可用于预测TCC的温控性能。     

An innovative navigation scheme of powered descent phase for Mars pinpoint landing

Pinpoint landing (within 100 m from the target) is essential for future Mars exploration missions. This paper deals with one aspect of the pinpoint landing architecture—the navigation performance improvement during the powered descent phase, and proposes an innovative navigation scheme to obtain the vehicle complete and accurate states. On the basis of dead reckoning relying on the Inertial Measurement Unit, measurements of the Integrated Doppler Radar are adopted to correct the vehicle velocity and altitude. Distance between the vehicle and one Mars Orbiter as well as their line-of-sight relative velocity is measured by a radio sensor, and integrated in the filter to correct the vehicle horizontal position. The innovative navigation system is based on an Extend Kalman Filter. Two observation schemes are developed. One considers measurements of the Integrated Doppler Radar and radio range measurement. Another further considers radio velocity measurement. The performance of the innovative navigation scheme is greatly influenced by the position of the Mars Orbiter with respect to the target. Stochastic analyses are performed to obtain optimal locations of Mars Orbiter. Finally, the innovative navigation scheme performances are assessed through stochastic simulations. Its performance improvements are demonstrated by comparison with the Integrated Doppler Radar only navigation scheme.     

行星着陆探测中的动力学与控制研究进展

着陆探测是获取行星特性和科学数据最直接、最有效的途径,也是目前技术难度最大、最为复杂的探测方式。在行星着陆探测过程中,动力学与控制是影响任务成败的关键因素之一。文章首先分析了行星着陆探测动力学与控制研究所面临的挑战与难题;然后,针对火星和小行星的着陆探测,重点分析了火星着陆进入段和下降段所涉及的动力学与控制,小行星附着探测动力学建模与制导控制的研究现状与关键问题;最后,提出了我国在行星着陆探测动力学与控制领域的未来重点发展方向。     

Study on O2 generation and CO2 absorption capability of four co-cultured salad plants in an enclosed system

The ability to generate O₂ and absorb CO₂ of several co-cultured vegetable plants in an enclosed system was studied to provide theoretical reference for the future man-plant integrated tests. Four kinds of salad plants (Lactuca sativa L. var. Dasusheng, Lactuca sativa L. var. Youmaicai, Gynura bicolor and Cichorium endivia L.) were grown in the CELSS Integration Test Platform (CITP). The environmental factors including O₂ and CO₂ concentration were continuously monitored on-line and the plant biomass was measured at the end of the test. The changing rules of O₂ and CO₂ concentration in the system were basically understood and it was found that the O₂ generated by the plants could satisfy the respiratory needs of 1.75 persons by calculation. It was also found that the plants could absorb the CO₂ breathed out by 2 persons when the light intensity was raised to 550 mmol m⁻² s⁻¹ PPF. The results showed that the co-cultured plants hold good compatibility and excellent O₂-generating and CO₂-absorbing capability. They could also supply some fresh edible vegetable for a 2-person crew.     

VTS雷达站选址问题优化模型

船舶交通管理系统（VTS,Vessel Traffic Services）雷达站选址方案对整个系统的功能正常发挥有重要影响.首先运用多层次模糊综合评价方法对雷达站候选点进行初选;然后建立了雷达站选址双目标优化模型,第1目标为总成本最小,包括雷达站的建设成本和雷达站与VTS中心的线路铺设成本,第2目标为被多重覆盖的水域单元权重之和最大;最后针对模型设计了遗传算法.算例分析显示,模糊综合评价可能去掉一些候选点,使得目标函数值变差,但是增加了方案的实际可行性.将程序运行10次,计算结果具有稳定性,本算法是收敛和稳定的,模型是可行的.     

基于未知地标被动观测的飞航导弹SINS俯仰姿态误差估计方法

针对飞航导弹单独使用时SINS存在姿态估计精度随时间降低的问题,提出了基于未知地标被动观测的SINS俯仰姿态误差估计方法。首先,根据飞航导弹中制导段飞行的特点,把SINS俯仰姿态误差估计问题转化为攻角估计问题。然后,在不改变导弹巡航路径的前提下,利用弹上成像导引头对视场内任意未知地标连续被动观测,分别提出了弹体坐标系和速度坐标系下的攻角估计方法,并分析了观测噪声对量测方程系数的影响。最后,利用平均去噪的思想对估计结果进行处理,提高了SINS俯仰姿态误差的估计精度。仿真结果表明：两种方法都能有效估计出飞航导弹SINS俯仰姿态量测误差。     

喷管两相流耦合数值模拟与粒子热增量预测

含有氧化铝粒子的两相流是固体火箭发动机喷管流场的重要特征.在有限体积方法框架下,采用基于热增量试验数据的粒子壁面反弹模型以及基于粒子轨道的单元内颗粒源(PSIC,Particle Source in Cell)两相流耦合算法,对喷管内两相流流场及粒子撞击产生的壁面热增量进行了计算和分析,研究了氧化铝粒子尺寸对粒子轨道分布和喷管壁面热增量分布的影响规律.研究结果表明:喷管扩张段内粒子稀疏区域范围随粒子直径增加而增大;粒子热增量只分布于喷管收缩段内,粒子直径越大,产生的壁面热增量越强.     

考虑跟踪制导的小天体着陆轨迹闭环优化方法

针对小天体着陆环境存在参数不确定性及初始状态偏差的特点,提出一种小天体着陆闭环优化方法,实现在节省燃料消耗的同时降低对参数的敏感度。首先,建立小天体着陆动力学模型,分析了燃料最优着陆问题;然后,采用线性二次型调节器设计了反馈制导律,推导闭环敏感度矩阵方程,构造燃料消耗和敏感度加权的性能指标,进而能够通过优化降低小天体着陆过程的敏感度。仿真结果表明,该闭环优化方法能有效降低对参数不确定性和初始状态偏差的敏感度,最终达到提高小天体着陆位置和速度精度的目标。     

变体飞机典型形式的历史发展及其应用机型浅析

绝大多数变体飞机形式都不是"突然出现"的全新概念,而是来源于相关技术在过去近百年里的长期积累。因此,特定变体飞机形式及其技术既可广泛用于与其历史发展密切相关的有人驾驶飞机,也可用于总体特性类似的无人驾驶飞机。本文剖析了部分变体飞机形式的技术发展渊源,分析了变体飞机发展和无人机的关系,并指出了多种变体飞机在具体机型上的应用前景。