热处理对9 Cr13 Mo3 Co3 Nb2 V组织与硬度的影响

采用金相分析、硬度测试等技术手段,研究热处理对马氏体不锈钢9Cr13Mo3Co3Nb2V组织和硬度的影响。结果表明：9Cr13Mo3Co3Nb2V经淬火、冰冷处理及多次回火后,残余奥氏体充分转变为回火马氏体,并产生较强的二次硬化效果,进而获得稳定的组织和高的硬度;在350℃以上回火时,由于组织中二次碳化物的析出,开始出现二次硬化倾向,至480~520℃时,回火硬度达到了最大值。     

9Cr13Ni6Co5Be超硬不锈钢的接触疲劳行为研究

采用推力式接触方式研究了9Cr13Ni6Co5Be钢的接触疲劳性能,获得了不同破坏概率下接触应力与疲劳寿命的关系式,得到了P-S-N曲线。当破坏概率P=0.01,0.05,0.10和0.50时,不同接触应力下的疲劳寿命表达式分别为N=3.0930×1042×S-9.9602、N=2.9196×1039×S-9.0090、N=1.6505×1038×S-8.6133和N=1.0679×1035×S-7.5988,指定疲劳寿命为5×107的疲劳极限分别为S=3112 MPa,3358 MPa,3493 MPa和3950 MPa。     

9Cr13Mo3Co3Nb2V马氏体不锈钢微观组织研究

对不同热处理状态下的微观组织结构进行了研究.采用物理化学相分析技术研究了9Cr13Mo3Co3Nb2V退火、淬火以及最终热处理制度下析出相的类型、含量及组成结构式.并用X射线小角散射(SAXS)(small angle x-ray scatter)分析了不同热处理制度下析出相在不同粒度间隔中的质量分布.结果表明:①9Cr13Mo3Co3Nb2V钢退火状态的组织为珠光体 碳化物(M23C6,MC和M6C),淬火状态组织为马氏体 碳化物(M23C6和MC),最终热处理状态的组织为回火马氏体 碳化物(M23 C6,MC和M3C);②小颗粒(≤300nm)碳化物析出相粒度分析表明,9Cr13Mo3Co3Nb2V钢退火、淬火状态析出相平均粒度相差不大,粗大颗粒较多,而最终热处理状态的析出相平均粒度明显减小,且细小颗粒比例较大.     

海洋天然产物Trichodermaxanthone分子光谱的理论研究

文章采用密度泛函理论B3LYP方法,研究了一种来源于海洋黄绿木霉的天然产物trichodermaxanthone。用6-311G基组计算了分子的最稳定构型及其前线轨道分布。在稳定构型的基础上用同样的理论方法和基组计算了该分子的红外振动频率及核磁共振碳谱(~(13)CNMR)。根据红外吸收峰强度将红外光谱分成3个区域,讨论了各区域的振动模式,对理论计算的~(13)C NMR化学位移进行了归属分析,并将理论结果与实验结果相比较,发现二者吻合度很高。     

热处理对Pt-PtRh13薄膜热电偶绝缘层性能的影响及机理分析

为了测量航空发动机高温部件表面温度,利用离子束溅射镀膜技术制备了拥有多层薄膜结构的Pt-PtRh13薄膜热电偶,包括Ni基合金基底、Ni Cr Al Y黏结层、Al2O3过渡层、Al2O3绝缘层、Pt/Pt Rh13薄膜热电偶和Al2O3保护层。研究了热处理对Pt-PtRh13薄膜热电偶绝缘层性能的影响,并利用扫描电子显微镜(SEM)、X射线衍射分析(XRD)等手段对薄膜热电偶绝缘层性能下降的机理进行了分析。研究结果表明:利用Al2O3绝缘薄膜开发的Pt-PtRh13薄膜热电偶只用于900℃以下测温,在900℃以上长时间应用可能会出现测温不稳定问题,高温诱发Al2O3绝缘层发生晶型转变是主要原因。     

Tribological evaluation of surface modified H13 tool steel in warm forming of Ti–6Al–4V titanium alloy sheet

The H13 hot-working tool steel is widely used as die material in the warm forming of Ti–6Al–4V titanium alloy sheet. However, under the heating condition, severe friction and lubricating conditions between the H13 tools and Ti–6Al–4V titanium alloy sheet would cause difficulty in guaranteeing forming quality. Surface modification may be used to control the level of friction force, reduce the friction wear and extend the service life of dies. In this paper, four surface modification methods(chromium plating, TiAlN coating, surface polishing and nitriding treatment)were applied to the H13 surfaces. Taking the coefficient of friction(CoF) and the wear degree as evaluation indicators, the high-temperature tribological behavior of the surface modified H13 steel was experimentally investigated under different tribological conditions. The results of this study indicate that the tribological properties of the TiAlN coating under dry friction condition are better than the others for a wide range of temperature(from room temperature to 500 C), while there is little difference of tribological properties between different surface modifications under graphite lubricated condition, and the variation law of CoF with temperature under graphite lubricated is opposite to that under the dry friction.     

One-week habitation of two humans in an airtight facility with two goats and 23 crops – Analysis of carbon,oxygen, and water circulation

Human habitation and animal holding experiments in a closed environment, the Closed Ecology Experiment Facilities (CEEF), were carried out. The CEEF were established for collecting experimental data to estimate carbon transfer in the ecosystem around Rokkasho nuclear fuel reprocessing plant. Circulation of O₂ and CO₂, and supply of food from crops cultivated in the CEEF were conducted for the first time in the habitation experiments. Two humans known as eco-nauts inhabited the CEEF, living and working in the Plant Module (PM) and the Animal and Habitation Module (AHM), for a week three times in 2005. On a fresh weight basis, 82% of their food was supplied from 23 crops including rice and soybean, cultivated and harvested in the PM, in the 2nd and 3rd experiments. For the goats, the animals held in the experiments, all of their feed, consisting of rice straw, soybean plant leaves, and peanut shells and peanut plant leaves, was produced in the PM in the 2nd and 3rd experiments. The O₂ produced in the PM by photosynthesis of the crops was separated by the O₂ separator using molecular sheaves, then accumulated, transferred, and supplied to the AHM atmosphere. The CO₂ produced in the AHM by respiration of the humans and animals was separated by the CO₂ separator using solid amine, then accumulated, transferred, and supplied to the PM atmosphere. The amount of O₂ consumed in the AHM was 46–51% of that produced in the PM, and the amount of CO₂ produced in the AHM was 43–56% of that consumed in the PM. The surplus of O₂ and the shortage of CO₂ was a result of the fact that waste of the goats and the crops and part of the human waste were not processed in these habitation experiments. The estimated amount of carbon ingested by the eco-nauts was 64–92% of that in the harvested edible part of the crops. The estimated amount of carbon ingested by the goats was 36–53% of that in the harvested inedible part of the crops. One week was not enough time for determination of gas exchange especially for humans and animals, because fluctuation of their gas exchange was quite high. The amount of transpired water collected as condensate was 818–938 L d⁻¹, and it was recycled as replenishing water compensating transpiration loss of nutrient solution. The amount of waste nutrient solution discharged from the PM was 1421–1644 L d⁻¹. The waste nutrient solutions from rice and other crops were processed through micro filters (MFs) separately. The MF filtrated solutions were processed with reverse osmosis (RO) membrane filter separately and divided into filtrated water and concentrated waste nutrient solution. The concentrated waste nutrient solution from the crops other than rice was processed through an ultra-micro filter (UF) and reused, although that from rice was discharged in 2005. Concentrations of nutritional ions in the UF filtrated solution were determined, the depleted ions were added back, the UF filtrated solution was diluted with the RO membrane filtrated water, and the nutrient solution for the crops other than rice was regenerated. The nutrient solution for rice was newly made each time, using concentrated solution from an external source and the RO membrane filtrated water. Average amounts of water used in the AHM (L d⁻¹) were determined as follows: drinking by humans (filtrated water), 1.5; cooking, etc. (filtrated water other than for drinking), 14.3; drinking by goats, 3.8; showering (hot water), 13.2; showering (cold water), 0.1; washing of hand and face and brushing teeth, 4.1; washing of dishes, dish clothes and towels, 36.4; and washing of animal holding tools, 0.3. The waste water was processed by a RO purification system and recycled for toilet flushing and animal pens washing. A circulation experiment for water was started in 2006 and a circulation experiment for waste materials is planned for 2007. In 2006, a single duration of the air circulation experiments was 2 weeks, although the human habitants were changed after 1 week.     

13Cr4Mo4Ni4VA钢复合化学热处理过程渗层组织性能演变

对13Cr4Mo4Ni4VA钢进行了表层复合化学热处理,即在渗碳硬化层的基础上再进行渗氮处理,形成复合硬化层.采用光学显微镜(OM)、扫描电镜(SEM)、X射线衍射(XRD)、电子探针(EMPA)及显微硬度梯度测试等方法对复合化学热处理过程组织性能的演变规律进行探索研究.结果表明,13Cr4Mo4Ni4VA钢在复合化学...