Impact of rain on wave retrieval from Sentinel-1 synthetic aperture radar images in tropical cyclones

The main objective of our work was to investigate the impact of rain on wave observations from C-band (~5.3 GHz) synthetic aperture radar (SAR) in tropical cyclones. In this study, 10 Sentinel-1 SAR images were available from the Satellite Hurricane Observation Campaign, which were taken under cyclonic conditions during the 2016 hurricane season. The third-generation wave model, known as Simulating WAves Nearshore (SWAN) (version 41.31), was used to simulate the wave fields corresponding to these Sentinel-1 SAR images. In addition, rainfall data from the Tropical Rainfall Measuring Mission satellite passing over the spatial coverage of the Sentinel-1 SAR images were collected. The simulated results were validated against significant wave heights (SWHs) from the Jason-2 altimeter and European Centre for Medium-Range Weather Forecasts data, revealing a root mean square error (RMSE) of ~0.5 m with a 0.25 scatter index. Winds retrieved from the VH-polarized Sentinel-1 SAR images using the Sentinel-1 Extra Wide-swath Mode Wind Speed Retrieval Model after Noise Removal were taken as prior information for wave retrieval. It was discovered that rain did indeed affect the SAR wave retrieval, as evidenced by the 3.21-m RMSE of SWHs between the SAR images and the SWAN model, which was obtained for the ~1000 match-ups with raindrops. The raindrops dampened the wave retrieval when the rain rate was < ~5 mm/hr; however, they enhanced wave retrieval for higher rain rates. It was also found that the portion of the rain-induced ring wave with a wave number > 0.05 rad/m (~125 m wavelength) was clearly observed in the SAR-derived wave spectra.     

光栅信号时钟脉冲细分的误差分析

简介时钟脉冲细分技术的原理，着重分析其细分误差因素，给出了计算实际最大细分数的理论公式，并论述了光栅最大运动速度、时钟脉冲分频数和实际最大细分数之间的关系，对光栅信号时钟脉冲细分系统的参数设计具有指导意义。     

面向高速切削加工的数控编程技术

分析高速切削加工所具有的特殊性及优点,并说明高速切削对数控编程方法的限制.针对传统编程方法,提出了满足高速切削加工的刀位轨迹特殊处理关键技术,并对其实现方法进行了较详尽的论述.同时,对高速切削数控编程中刀具载荷分析与速率优化、毛坯残留量自动分析等新技术的实现方法也进行了探讨.     

一种新的六端口测量系统自校准方法

提出了一种新的六端口自校准方法.本方法从六端口相对功率理论出发,导出了六端口系统常数的自校准方程,给出了求解系统常数初值的方法,并利用梯度法对方程组求解,仿真结果表明用一个匹配负载、四个失配负载就可以解出系统常数.     

CBERS-1卫星红外多光谱扫描仪扫描子系统

文章介绍了CBERS -1卫星红外多光谱扫描仪(IRMSS)关键部件扫描子系统研制与应用情况。     

GDBMS中图形数据的表示与存贮

GDBMS是作者设计并实现的一个实验性的工程图形数据库管理系统。它基于扩充关系数据模型,成功地完成了对工程图形数据的描述。 本文从图形的数据库表示出发,对几何实体的建模方法进行了分析,介绍了GDBMS中的图形数据模型及其实现方法。该数据模型吸取图元枚举法(PI方法),结构实体几何表示法(CSG法)和边界表示法(BR方法)的优点,在进行交互式图形编辑以及图形显示时,采用CSG结构,在数据库的存贮和处理时,采用扩充的BR方法。     

疲劳裂纹扩展速率试验数据的可靠性分析模型

以指定ΔＫ下的ｄａ／ｄＮ服从对数正态分布为基础，提出３种ｄａ／ｄＮ试验数据统计处理方法；依据一组４０ＣｒＮｉＭｏ材料的ＣＴ试样的试验数据处理结果，对３方法进行了分析对比。     

分集接收机鉴相算法研究与设计

从介绍分集接收机的基本工作原理入手,着重论述分集接收机中差模环的两种鉴相算法,并给出两种算法在使用FPGA实现时的资源占用情况,最后介绍了两种算法在实际工程中的应用。     

低地球轨道环境原子氧对航天器表面材料聚酰亚胺作用的数值模拟

在建立数学物理模型的基础上，对氏地球轨道环境和地面实验环境下，有无保护层的聚酰亚胺所受原子氧冲蚀作用进行了进行了成功的数值模拟，获得了具有工程应用价值的数值计算结果，并讨论了数学物理模型中各参数对基蚀曲线形状的影响。从数值模拟结果和美国太空实验结果的比较可以看出，本文数据模拟的结果是正确的。该项工作对航天器的设计具有重要指导意义。