Application of Wuhan Ionospheric Oblique Backscattering Sounding System (WIOBSS) for the investigation of midlatitude ionospheric irregularities

An upgrade of Wuhan Ionospheric Backscattering Sounding System (WIOBSS) was developed in 2015. Based on the Universal Serial Bus (USB), and a high performance FPGA, the newly designed WIOBSS has a completely digital structure, which makes it portable and flexible. Two identical WIOBSSs, which were situated at Mile (24.31°N, 103.39°E) and Puer (22.74°N, 101.05°E) respectively, were used to investigate the ionospheric irregularities. The comparisons of group distance, Doppler shift and width between Mile-Puer and Puer-Mile VHF ionospheric propagation paths indicate that the reciprocity of the irregularities is satisfied at midlatitude region. The WIOBSS is robust in the detection of ionospheric irregularities.     

A new design of low-power portable digital ionosonde

The Ionospheric Laboratory of Wuhan University is interested in upgrading its instrumentation replacing the WIOBSS (Wuhan Ionospheric Oblique Backscattering Sounding System) with a more flexible and automatic ionosonde. Then the updated ionosonde WMI (Wuhan Multifunctional Ionosonde) with automatic ionogram scaling has been developed to satisfy future research. The new system not only inherited some classic techniques from WIOBSS, such as the pulse compression and the coherent integration techniques, but also made great improvements in hardware design and software updating. This paper mainly introduces evolutions of this new ionosonde in both digital transceiver and digital signal processing domain, and also presents some observations.     

Ionospheric observations made by a time-interleaved Doppler ionosonde

Mid-latitude HF observations of ionospheric Doppler velocity as a function of frequency are reported here as observed over a quiet 24-h period by a KEL IPS71 ionosonde operating at a 5-min sampling rate. The unique time-interleaving technique used in this ionosonde provided a Doppler resolution of 0.04 Hz over a Doppler range of ±2.5 Hz at each sounding frequency via FFT processing and is described here for the first time. The time-interleaving technique can be applied to other types of ionosonde as well as to other applications. The measurements described were made at a middle latitude site (Salisbury, South Australia). Doppler variations (<30 min) were ever present throughout the day and showed short-period TID characteristics. The day-time Doppler shift was found to closely follow the rate-of-change of foF2 as predicted by a simple parabolic layer model. The descending cusp in short-period TIDs is shown to mark an abrupt change with increasing frequency from negative towards positive Doppler shift with the greatest change in Doppler shift being observed below the cusp. The “smilergram” is introduced as observed in both F2 and Sporadic E. The characteristic curve in Doppler versus group height at a single frequency is described and related to changes in reflection symmetry, velocity and depth of moving ionospheric inhomogeneities.     

敏捷数字电离层测高仪系统研制及初步观测

在小型天线和低发射功率条件下，保证电离层测高仪观测数据质量和提高观测速度一直是电离层垂测的技术难点.针对这一问题，基于新近发展的高速数字芯片和射频器件，采用窄带跟踪滤波、脉冲压缩、编码复用和天线均衡匹配等技术，设计和研制一种敏捷数字电离层测高仪.该系统采用数米高的小型收发天线和便携式主机系统，配置任意频率扫描方式频高图、高分辨率多普勒频高图和斜向探测等多种工作模式，具有可流动观测布站、系统参数灵活捷变及适合快速电离层扰动探测等能力.敏捷数字电离层测高仪为组网观测获得大范围电离层时空变化和电离层快速扰动及传播提供了一种有效的探测手段.      

电离层中小尺度扰动的多频多普勒快速探测与分析

电离层反射回波的高频多普勒频移测量是研究电离层扰动的重要方法之一.利用基于单频信号相位变化率测量的实时探测方法,获取连续高精度多频多普勒频高图,以实现中小尺度电离层扰动的快速探测研究.该方法被应用于敏捷式高性能电离层无线电多频探测系统样机平台.经验证在该平台上获取的多普勒频移分辨率可达0.039Hz,频高图探测周期最短小于1min.基于这种快速探测方法和平台在武汉观测站进行了较长时间的观测和数据采集,获得高精度多普勒频移并反演出电子浓度等值面法向运动速度,得到电离层反射寻常波的多普勒频高图和垂直扰动速度等信息,进而推演出电离层扰动随时间和空间的实时变化特征.对这些时域信号进行频谱分析,初步结果显示这些扰动主要是由极区活动激发的中国中部地区冬季出现率较高的中尺度TID.此外,对三种常用的电离层扰动反演分析方法进行了对比研究,结果显示电离层扰动的变化趋势基本一致,说明观测数据和研究方法可靠稳定,为多频多点电离层扰动的传播特性观测研究提供了基础.      

Ionospheric response to the 17 March and 22 June 2015 geomagnetic storms over Wuhan region using GNSS-based tomographic technique

By using the data of GNSS (Global Navigation Satellite System) observation from Crustal Movement Observation Network of China (CMONOC), ionospheric electron density (IED) distributions reconstructed by using computerized ionospheric tomography (CIT) technique are used to investigate the ionospheric storm effects over Wuhan region during 17 March and 22 June 2015 geomagnetic storm periods. F-region critical frequency (foF2) at Wuhan ionosonde station shows an obvious decrease during recovery phase of the St. Patrick’s Day geomagnetic storm. Moreover, tomographic results present that the decrease in electron density begins at 12:00 UT on 17 March during the storm main phase. Also, foF2 shows a long-lasting negative storm effect during the recovery phase of the 22 June 2015 geomagnetic storm. Electron density chromatography presents the evident decrease during the storm day in accordance with the ionosonde observation. These ionospheric negative storm effects are probably associated with changes of chemical composition, PPEF and DDEF from high latitudes.     

高精度多普勒频高图的获取和分析

电离层高频反射回波的多普勒频移是研究电离层扰动的一个重要参数。在数字测高仪探测中，高分辩率的多普勒频移一般在漂移测量中获得，但这种测量方式探测的频点少，不能获得扰动的高度剖面；而在频高图模式下，虽然工作的频点多，能够获得电子浓度的高度剖面的信息，但探测的多普勒频移的分辩率低，无法用来精确检测电离层扰动。实际的电离层高频回波一般为窄带信号，由此本文中提出了一种新的分析方法，利用DGS-256数字测高仪频高图模式下记录的16个多普勒通道的数据，通过反傅里叶变换还原成时域信号，采用最小二乘法估计相邻时间点的相位差，获得高精度多普勒频高图。作为实例，利用该方法分析武汉电离层观象台数字测高仪观测站的观测数据，得到了多频点的多普勒频移曲线。结果表明：在DGS-256数字测高仪频高图模式下能够得到高精度多普勒频高图，这在电离层扰动探测和研究中很在意义。     

CAS-DIS数字电离层测高仪系统研制

提出了将射频直接采样数字化的接收方式应用于数字电离层测高仪系统的设计方案, 并详细介绍了该方案在CAS-DIS (Chinese Academy of Sciences, Digital Ionosonde)电离层测高仪系统的应用, 给出了CAS-DIS电离层测高仪在中国武汉电离层探测标校试验场和武汉-北京斜向电离层探测系统中的实验结果. 观测结果表明, 采用本文提出的数字化方案设计的电离层测高仪系统性能优越, 且可以分别工作在垂直和斜向探测模式, 满足了电离层探测的多种应用需求.      

Fading in the HF ionospheric channel and the role of irregularities

It is well known that the ionosphere affects radio wave propagation especially in the high frequency (HF) range. HF radio waves reflected by the ionosphere can reach considerable distances, often with changes in amplitude, phase, and frequency. The ionosphere is a dispersive in frequency and time, bi-refractive, absorbing medium, in which multipath propagation due to traveling irregularities is very frequent. The traveling irregularities undulate the reflecting ionospheric layer, introducing variations in signal amplitude (fading). In this multipath time variant channel fading is mainly considered, even though it is not the sole effect. Echo signals from a single reflection, as in ionospheric vertical sounding (VIS) techniques, are affected by a certain degree of variability even in quiet ionospheric conditions. In this work the behavior of the ionospheric channel is studied and characterized by observing the power variation of received echoes using the VIS technique. Multipath fading was analyzed quantifying the power variation of the signal echo due to irregularities on a temporal scale from 0.5 to 256 s. An experimental set-up derived from an ionosonde was implemented and the analysis was performed employing a special numerical algorithm operating off-line on the acquired time sequence of the signal. The gain-loss of the irregularity shapes are determined in some special cases.     

电离层虚高的高精度测量与分析

为了提高电离层虚高测量精度,介绍了利用电离层回波相位实现高精度虚高测量的方法,并以CADI(Canadian Advanced Digital Ionosonde)电离层数字测高仪为研究平台,进行组合脉冲控制和回波相位测量分析,开展了一系列虚高测量实验,并与传统的利用回波时间延迟的虚高测量方法进行了分析比较.实验结果表明,基于回波相位的测量分析方法与回波时延测量分析方法相比,其虚高测量精度高一个量级以上,这对精确反演电离层峰下电子浓度剖面及研究电离层精细结构具有重要意义.      

Use of global ionospheric maps for HF Doppler measurements interpretation

The HF Doppler technique, a method of measurement of Doppler frequency shift of ionospheric signal, is one of the well-known and widely used techniques of ionosphere research. It allows investigation of various disturbances in the ionosphere. There are different sources of disturbances in the ionosphere such as geomagnetic storms, solar flashes, meteorological effects and atmospheric waves. The HF Doppler technique allows us to find out the influence of earthquakes, explosions and other processes on the ionosphere, which occurs near the Earth. HF Doppler technique has high sensitivity to small frequency variations and high time resolution but interpretation of results is difficult. In this paper, we attempt to use GPS data for Doppler measurements interpretation. Modeling of Doppler frequency shift variations with use of TEC allows separation of ionosphere disturbances of medium scale.     

Effects of a “day-time” substorm on the ionosphere and radio propagation

Propagation mechanisms of lateral (non-great-circle) signals on a high-latitude HF radio path during magnetospheric substorms that occurred in the day-time have been considered. The path is equipped with oblique ionospheric sounding (OIS) from Murmansk to St. Petersburg. The OIS method gives the possibility to determine propagation modes, MOF (maximum observed frequency) values, signal delays, etc. Data of the CUTLASS radar, the IMAGE magnetometer system, the Finnish riometer chain, and the Tromso ionosonde were also used for the analysis. The main results are the following: (1) the lateral signal propagation takes place, as a rule, if the path midpoint is located near the irregularity region that moves sharply from high to low latitudes. The lateral signal propagation appearing during day-time is a new effect. (2) Formation of dense field-aligned irregularities during a substorm leads to decreasing F2MOF values on radio paths. These results can be useful for problems of radiolocation, HF communications and navigation.     

Ionospheric wave processes during HF heating experiments

Effects of ionospheric modification produced by powerful high frequency radio waves are studied using the method of field-aligned scattering of diagnostic HF radio signals. Observations of scattered HF signals have been made by the Doppler spectrum method. Analysis of the experimental data shows the appearance of quasiperiodic variations in Doppler frequency shift f_d, with periods 30–60 s during the heating cycles. Powerful HF waves are assumed to excite the Alfvén resonator generating oscillations of the magnetic field lines in the heated region and giving rise to f_d artificial variations and magnetic pulsations. In the case of continuous action of the powerful HF transmitter ionospheric waves are sometimes observed with periods 12–25 min, typical of medium-scale travelling ionospheric disturbances.     

A new method for improving the performance of an ionospheric model developed by multi-instrument measurements based on artificial neural network

There are remarkable ionospheric discrepancies between space-borne (COSMIC) measurements and ground-based (ionosonde) observations, the discrepancies could decrease the accuracies of the ionospheric model developed by multi-source data seriously. To reduce the discrepancies between two observational systems, the peak frequency (foF2) and peak height (hmF2) derived from the COSMIC and ionosonde data are used to develop the ionospheric models by an artificial neural network (ANN) method, respectively. The averaged root-mean-square errors (RMSEs) of COSPF (COSMIC peak frequency model), COSPH (COSMIC peak height model), IONOPF (Ionosonde peak frequency model) and IONOPH (Ionosonde peak height model) are 0.58 MHz, 19.59 km, 0.92 MHz and 23.40 km, respectively. The results indicate that the discrepancies between these models are dependent on universal time, geographic latitude and seasons. The peak frequencies measured by COSMIC are generally larger than ionosonde’s observations in the nighttime or middle-latitudes with the amplitude of lower than 25%, while the averaged peak height derived from COSMIC is smaller than ionosonde’s data in the polar regions. The differences between ANN-based maps and references show that the discrepancies between two ionospheric detecting techniques are proportional to the intensity of solar radiation. Besides, a new method based on the ANN technique is proposed to reduce the discrepancies for improving ionospheric models developed by multiple measurements, the results indicate that the RMSEs of ANN models optimized by the method are 14–25% lower than the models without the application of the method. Furthermore, the ionospheric model built by the multiple measurements with the application of the method is more powerful in capturing the ionospheric dynamic physics features, such as equatorial ionization, Weddell Sea, mid-latitude summer nighttime and winter anomalies. In conclusion, the new method is significant in improving the accuracy and physical characteristics of an ionospheric model based on multi-source observations.     

Studying characteristics of traveling ionospheric disturbances using U-shaped traces on vertical incidence ionograms

This paper presents a case study when due to the descending additional U-shaped trace on vertical incidence ionograms, increased critical frequency stabilizes. This corresponds to an ionospheric disturbance that moves toward the ionosonde and then stays overhead.Within a 2D model, traveling ionospheric disturbances (TIDs) are superimposed on the inverted background ionosphere. So ray tracing is used to obtain propagation paths through non-stratified ionosphere thus synthesizing the disturbed ionogram traces. Investigated are changes in the cusp shape caused by varying TID parameters. A cusp-fitting method to determine the TID amplitude, spatial scale, and horizontal drift velocity are shown.     

电离层数字测高仪被动接收观测模式研究

利用CADI(Canadian Advanced Digital Ionosonde)电离层数字测高仪平台,实现了新的电离层数字测高仪被动接收观测模式.利用新开发的观测模式,在观测台站开展了一系列实验观测研究,经过信号处理和信息提取,获得了电离层特征参量f0F2回归方程,高频信道背景噪声分布,电离层D层对电波的吸收等电离层探测信息.实验观测结果表明,所获取的f0F2与主动探测结果相关性在0.84以上,高频信道背景噪声分布以及电离层D层吸收状况与电离层实际分析结果相吻合.     

Proposal for ionospheric tomography technique using a new HF radio source

Measurements of the line integral of the electron density along satellite-to-ground ray paths (i.e. TEC) using differential phase or Doppler of two coherent VHF/UHF signals transmitted from NNSS or GPS satellite networks have been used in the ionospheric tomography for mapping large-scale ionospheric images over region of interest. In this paper, we present theoretical studies of using a new signal source HF frequency in tomographic imaging. The initial phase problem inherent in the phase measurement can be eliminated by measuring Faraday rotations. Relative rotation on two adjacent HF frequencies is used to solve the ambiguity problem. A second-order approximation of the Faraday rotation incorporated with ray-tracing technique improves the reconstruction degradation due to ionospheric refractions. CASSIOPE is a multi-purpose small satellite that receives HF signals from ground radar facilities and it is scheduled for launch in early 2008. Simulations have demonstrated the potential applications of the ionospheric tomography in CASSIOPE/e-POP satellite experiment.     

Digital spacecraft ionosondes

In cooperation with RCA, Astro-Electronics Division, a digital spacecraft ionosonde has been developed and its prototype built by ULCAR. On-board use of the Direct Discrete Fourier Transform for signal-to-noise enhancement, suppression of unwanted echoes and the identification of echo properties permit several applications. In ionospheric topside satellites (>800 km above ground) the ionospheric profile over all parts of the earth will be measured with simple and new data compression techniques on board of the satellite. Digital data preprocessing overcomes the breakthrough of ground-based man-made interference and analyzes auroral and equatorial echoes. Because the ionosonde measures amplitude, phase, Doppler, range and polarization of a radio wave simultaneously, it will be a very useful tool for the Waves in Space Plasma program of the NASA Space Shuttle, especially for a mother-daughter configuration. With a synchronized transmitter on the ground, such a Digisonde in a low-flying satellite (100–400 km) can receive signals from ducted radio waves launched into the ionosphere near natural or artificial ionization depletion areas for the study of large distance radiowave propagation.     

Method of the HF wave absorption evaluation based on GIRO network data

High frequency (HF) communication is strongly dependent on the state of the ionosphere, which specifies the mode structure of the radio wave propagating in ionosphere. Another core factor defining the strength of the HF signal at the receiving site is the ionospheric absorption. Accurate modelling the effect of absorption is an essential part of many studies of the HF propagation in the ionosphere.This paper proposes a method for estimating the absorption. The method is based on analysis of vertical sounding ionograms. The main idea of the approach is to compare the main parameters retrieved from measured and simulated ionograms. The combination of Global Ionospheric Radio Observatory (GIRO, http://giro.uml.edu) data and ionograms modelling allows for developing the empiric absorption model available at near real-time. The ionogram simulation taking into account absorption utilizes the NIM-RT (North Ionospheric Model and Ray Tracing) software. As a result, the proposed technique provides more reliable and accurate evaluation of minimum frequency at which echoes are observed in vertical incidence ionosonde soundings. The values of these frequencies should be used in the following simulation to optimize parameters in the empirical formulae for defining absorption HF wave in ionosphere.The ultimate objective of this work is the designing the method, which allows the simulating of HF radio channel accounting for regular absorption due to UV radiation of the Sun. Eventually it could be considered as some kind of the HF propagation forecasting.     

Histogram-based ionogram displays and their application to autoscaling

A simple method is described for displaying and auto scaling the basic ionogram parameters foF2 and h’F2 as well as some additional layer parameters from digital ionograms. The technique employed is based on forming frequency and height histograms in each ionogram. This technique has now been applied specifically to ionograms produced by the IPS5D ionosonde developed and operated by the Australian Space Weather Service (SWS). The SWS ionograms are archived in a cleaned format and readily available from the SWS internet site. However, the method is applicable to any ionosonde which produces ionograms in a digital format at a useful signal-to-noise level. The most novel feature of the technique for autoscaling is its simplicity and the avoidance of the mathematical imaging and line fitting techniques often used. The program arose from the necessity to display many days of ionogram output to allow the location of specific types of ionospheric event such as ionospheric storms, travelling ionospheric disturbances and repetitive ionospheric height changes for further investigation and measurement. Examples and applications of the method are given including the removal of sporadic E and spread F.