DNA DSB induced by iron ions in human fibroblasts: LET dependence and shielding efficiency.

This paper reports on DNA DSB induction in human fibroblasts by iron ions of different energies, namely 5, 1 GeV/u, 414 and 115 MeV/u, in absence or presence of different shields (PMMA, Al and Pb). Measure of DNA DSB was performed by calibrated Pulsed Field Gel Electrophoresis using the fragment counting method. The RBE-LET relationships for unshielded and shielded beams were obtained both in terms of dose average LET and of track average LET. Weak dependence on these parameters was observed for DSB induction. The shielding efficiency, evaluated by the ratio between the cross sections for unshielded and shielded beams, depends not only on the shield type and thickness, but also on the beam energy. Protection is only observed at high iron ions energy, especially at 5 GeV/u, where PMMA shield gives higher protection compared to Al or Pb shields of the same thickness expressed in g/cm2.     

空间飞行器碎片防护结构的简化设计

给出一种基于实验和理论分析的航天器碎片防护结构简化设计方法 ,该方法可用于进行大型空间飞行器碎片防护结构的方案选择和初步结构设计。利用空间碎片的工程环境模型和防护结构几何经验公式 ,采用“设计碎片”的概念 ,对防护结构进行几何结构设计和质量估算 ,并采用改进的防护性能验证算法进行空间碎片的风险评估。通过对惠式防护结构的计算 ,得到的计算结果基本符合实际要求。     

基于缩放实验的Whipple结构撞击特性

针对航天器空间碎片防护问题,基于缩放实验方法,开展了7 km/s以上超高速碰撞仿真研究.建立了单板和Whipple防护结构的仿真模型,并对铝-铝撞击问题和镉-镉撞击问题进行了多工况仿真.通过实验结果与数值仿真的对比,表明了数值仿真技术的正确性,并从仿真角度验证了缩放实验方法的有效性.对缩放实验方法的适用性进行了仿真验证,结果表明该方法对弹丸形状适用性较好,对3～4 km/s以上撞击速度的适用性较好,但对Whipple防护结构后板存在一定误差.分析了Whipple结构后板的失效模式,提出了失效模式的不连续性导致了缩放实验方法的误差.最后通过数值仿真计算了Whipple结构7 km/s以上弹道极限特性,提出了失效模式的不连续性造成了在该速度段弹道极限曲线的分叉现象.     

Chromosomal aberrations induced by high-energy iron ions with shielding.

Biophysical models are commonly used to evaluate the effectiveness of shielding in reducing the biological damage caused by cosmic radiation in space flights. To improve and validate these codes biophysical experiments are needed. We have measured the induction of chromosomal aberrations in human peripheral blood lymphocytes exposed in vitro to 500 MeV/n iron ion beams (dose range 0.1-1 Gy) after traversing shields of different material (lucite, aluminium, or lead) and thickness (0-11.3 g/cm2). For comparison, cells were exposed to 200 MeV/n iron ions and to X-rays. Chromosomes were prematurely condensed by a phosphatase inhibitor (calyculin A) to avoid cell-cycle selection produced by the exposure to high-LET heavy-ion beams. Aberrations were scored in chromosomes 1, 2, and 4 following fluorescence in situ hybridization. The fraction of aberrant lymphocytes has been evaluated as a function of the dose at the sample position, and of the fluence of primary 56Fe ions hitting the shield. The influence of shield thickness on the action cross-section for the induction of exchange-type aberrations has been analyzed, and the dose average-LET measured as a function of the shield thickness. These preliminary results prove that the effectiveness of heavy ions is modified by shielding, and the biological damage is dependent upon shield thickness and material.     

Analytical-HZETRN model for rapid assessment of active magnetic radiation shielding

The use of active radiation shielding designs has the potential to reduce the radiation exposure received by astronauts on deep-space missions at a significantly lower mass penalty than designs utilizing only passive shielding. Unfortunately, the determination of the radiation exposure inside these shielded environments often involves lengthy and computationally intensive Monte Carlo analysis. In order to evaluate the large trade space of design parameters associated with a magnetic radiation shield design, an analytical model was developed for the determination of flux inside a solenoid magnetic field due to the Galactic Cosmic Radiation (GCR) radiation environment. This analytical model was then coupled with NASA’s radiation transport code, HZETRN, to account for the effects of passive/structural shielding mass. The resulting model can rapidly obtain results for a given configuration and can therefore be used to analyze an entire trade space of potential variables in less time than is required for even a single Monte Carlo run. Analyzing this trade space for a solenoid magnetic shield design indicates that active shield bending powers greater than ∼15 Tm and passive/structural shielding thicknesses greater than 40 g/cm² have a limited impact on reducing dose equivalent values. Also, it is shown that higher magnetic field strengths are more effective than thicker magnetic fields at reducing dose equivalent.     

强γ射线参考辐射场散射影响研究

采用蒙特卡罗程序MCNP对强γ射线参考辐射场的散射特性进行了模拟,确立了辐射场实验空间内的剂量率和能谱分布。通过多种角度对屏蔽墙散射和在束散射体散射进行了细致的分析,为校准实验室钴源辐射场的实验应用和屏蔽设计提供参考。     

柔性多层冲击空间碎片防护结构设计与试验

充气展开密封结构是未来空间站以及大型空间居住舱的理想构建形式,其外蒙皮由气密层、增强层、微流星体和空间碎片防护层、辐射保护层以及热控层组成。为了既满足对空间碎片的防护,又满足折叠、收纳以及展开的要求,空间碎片防护层需要采用多层冲击防护结构设计。基于多层冲击防护结构,采用国产的玄武岩纤维材料和芳纶织物的特性参数,根据弹道极限方程设定了柔性空间碎片防护层的设计参数,并通过高速撞击试验对根据设计参数生产的试验件进行了试验验证,试验结果与柔性多层冲击防护结构的弹道极限方程吻合较好。     

Hypervelocity impact on the GIOTTO Halley Mission dust shield: Momentum exchange and measurement

The two layer dust shield on the GIOTTO Halley Mission is constructed in a meteoroid bumper configuration. The dust shield is instrumented so that parameters associated with the hypervelocity collision of cometary particles on the exposed surface can be determined. A multisensor detector array provides simultaneous sensing of the momentum exchange of particles impacting and subsequently penetrating the outer layer of the dust shield. Current knowledge of momentum exchange during hypervelocity impact relative to the GIOTTO Halley Mission and the dust shield experiment is reviewed. The sensors used for determination of momentum exchange exhibit a functional dependence on projectile velocity leading to an enhancement of the sensor signal as the relative impact velocity increases. The GIOTTO Mission provides a very unique opportunity to obtain hypervelocity momentum exchange information at a known impact velocity. Therefore, with the dust experiment, a determination of the velocity index for both momentum and multilayered penetration sensor is possible. Results of analysis of analytical and laboratory studies indicate that the velocity index for hypervelocity impact is approximately 2.0 at the 68 km/sec encounter impact velocity of the GIOTTO Mission. A clear determination of the size and mass distribution of the cometary dust near the comet will be possible from the in-situ measurement of the DIDSY GIOTTO experiment.     

移位损伤剂量模型及其应用

首先描述了移位损伤的机理及其影响器件性能的机制,引入了适合航天器工程抗辐射加固设计使用的移位损伤剂量模型,探讨了其在CCD器件电荷传输效率CTE,Si器件平均暗电流以太阳电池阵输出功率等工程参数衰降中的应用,介绍了建立的基于移位损伤剂量模型的空间环境中CCD器件CTE衰降预测模式,其结果与欧空局空间环境信息系统的计算结果相吻合．该程序在光电器件抗辐射加固设计中具有重要的应用价值．     

Heavy ion contributions to organ dose equivalent for the 1977 galactic cosmic ray spectrum

Estimates of organ dose equivalents for the skin, eye lens, blood forming organs, central nervous system, and heart of female astronauts from exposures to the 1977 solar minimum galactic cosmic radiation spectrum for various shielding geometries involving simple spheres and locations within the Space Transportation System (space shuttle) and the International Space Station (ISS) are made using the HZETRN 2010 space radiation transport code. The dose equivalent contributions are broken down by charge groups in order to better understand the sources of the exposures to these organs. For thin shields, contributions from ions heavier than alpha particles comprise at least half of the organ dose equivalent. For thick shields, such as the ISS locations, heavy ions contribute less than 30% and in some cases less than 10% of the organ dose equivalent. Secondary neutron production contributions in thick shields also tend to be as large, or larger, than the heavy ion contributions to the organ dose equivalents.     

Shielding against galactic cosmic rays.

Ions of galactic origin are modified but not attenuated by the presence of shielding materials. Indeed, the number of particles and the absorbed energy behind most shield materials increases as a function of shield thickness. The modification of the galactic cosmic ray composition upon interaction with shielding is the only effective means of providing astronaut protection. This modification is intimately connected with the shield transport properties and is a strong function of shield composition. The systematic behavior of the shield properties in terms of microscopic energy absorption events will be discussed. The shield effectiveness is examined with respect to conventional protection practice and in terms of a biological endpoint: the efficiency for reduction of the probability of transformation of shielded C3H10T1/2 mouse cells. The relative advantage of developing new shielding technologies is discussed in terms of a shield performance as related to biological effect and the resulting uncertainty in estimating astronaut risk.     

Experimental verification of particle distributions in proton-induced cascades.

Predictions of shielding requirements, levels of induced radioactivity and of radiation damage around high-energy accelerators require accurate simulation of the physics of proton-induced cascades from energies above the TeV to energies below the eV region. Experimental studies of cascades using activation detector, dosimeter and counter techniques provide valuable data for validating simulation procedures and for extrapolating the required accelerator design parameters directly. Such studies include the yields of low-energy secondary neutrons in proton-nucleus interactions, the spatial distribution of hadrons, low-energy neutrons and energy deposition close to the core of proton cascades and measurements at large lateral depths in shields. This paper describes some of these measurement and compares them with the predictions made by Monte-Carlo simulations.     

一种新的烧蚀热响应算法在质量估算中的应用

针对预测飞行器再入过程中气动热流引发的烧蚀热响应导致热防护罩表层材料质量损耗的问题,研究了热防护罩的几何模型和烧蚀质量估算的方法,通过建立三自由度再入轨迹动力学方程,应用修正的牛顿流体理论计算气动系数,以及Detra-Kemp-Riddell和Tauber-Sutton理论计算驻点热流密度和热辐射,利用一维非线性热传导方程模拟了碳化材料的烧蚀过程,提出了基于Newton-Raphson和TDMA的烧蚀热响应算法估计飞行器热防护罩质量损耗的方法。通过分析,实现了再入全过程热防护材料烧蚀深度连续动态变化的预测,能够有效替代热平衡积分法,估算的烧蚀质量为优化热防护罩的几何模型和再入轨迹提供了参考依据。     

Energy requirements of a thermally processed ISRU radiation shield for a lunar habitat

The purpose of this study was to establish, on a first principles basis, the order of magnitude of energy requirements for a thermally processed, lunar regolith radiation shield constructed using an in-situ resource utilisation (ISRU) approach. This was done by developing a reference scenario habitat and using thermodynamic relationships and specific heat capacity expressions to determine the energy required to bring such a regolith volume up to sintering temperatures (c. 1,375 K). Once the energy requirements were developed some power system architectures were outlined conceptually and a nuclear power plant of c. 400 kW was suggested as a means to supply the necessary energy. This is well beyond current space nuclear applications. The study concludes that it is likely that the most efficient near-term solution is chemical processing of regolith, from an energy requirements perspective. The technology is also more mature and likely to be delivered on near term projects as it does not require such scaled-up power system architectures. Alternatively, bringing storm shelters up with the habitat to provide a means of weathering major solar events, and adding additional radiation protection to habitat quarters, possibly through a water blanket or similar mechanism, could provide a non-ISRU solution with current technology. However, in the longer term, the development of MW-scale power system architectures (fission, solar etc.), may permit a very large volume of material to be processed thermally for construction material, making a large, permanent human presence on the Moon more easily realisable.     

Implementation of ALARA radiation protection on the ISS through polyethylene shielding augmentation of the Service Module Crew Quarters.

With 5-7 month long duration missions at 51.6 degrees inclination in Low Earth Orbit, the ionizing radiation levels to which International Space Station (ISS) crewmembers are exposed will be the highest planned occupational exposures in the world. Even with the expectation that regulatory dose limits will not be exceeded during a single tour of duty aboard the ISS, the "as low as reasonably achievable" (ALARA) precept requires that radiological risks be minimized when possible through a dose optimization process. Judicious placement of efficient shielding materials in locations where crewmembers sleep, rest, or work is an important means for implementing ALARA for spaceflight. Polyethylene (CnHn) is a relatively inexpensive, stable, and, with a low atomic number, an effective shielding material that has been certified for use aboard the ISS. Several designs for placement of slabs or walls of polyethylene have been evaluated for radiation exposure reduction in the Crew Quarters (CQ) of the Zvezda (Star) Service Module. Optimization of shield designs relies on accurate characterization of the expected primary and secondary particle environment and modeling of the predicted radiobiological responses of critical organs and tissues. Results of the studies shown herein indicate that 20% or more reduction in equivalent dose to the CQ occupant is achievable. These results suggest that shielding design and risk analysis are necessary measures for reducing long-term radiological risks to ISS inhabitants and for meeting legal ALARA requirements. Verification of shield concepts requires results from specific designs to be compared with onboard dosimetry.     

On the validity of the aluminum equivalent approximation in space radiation shielding applications

The origin of the aluminum equivalent shield approximation in space radiation analysis can be traced back to its roots in the early years of the NASA space programs (Mercury, Gemini and Apollo) wherein the primary radiobiological concern was the intense sources of ionizing radiation causing short term effects which was thought to jeopardize the safety of the crew and hence the mission. Herein, it is shown that the aluminum equivalent shield approximation, although reasonably well suited for that time period and to the application for which it was developed, is of questionable usefulness to the radiobiological concerns of routine space operations of the 21st century which will include long stays onboard the International Space Station (ISS) and perhaps the moon. This is especially true for a risk based protection system, as appears imminent for deep space exploration where the long-term effects of Galactic Cosmic Ray (GCR) exposure is of primary concern. The present analysis demonstrates that sufficiently large errors in the interior particle environment of a spacecraft result from the use of the aluminum equivalent approximation, and such approximations should be avoided in future astronaut risk estimates. In this study, the aluminum equivalent approximation is evaluated as a means for estimating the particle environment within a spacecraft structure induced by the GCR radiation field. For comparison, the two extremes of the GCR environment, the 1977 solar minimum and the 2001 solar maximum, are considered. These environments are coupled to the Langley Research Center (LaRC) deterministic ionized particle transport code High charge (Z) and Energy TRaNsport (HZETRN), which propagates the GCR spectra for elements with charges (Z) in the range 1 ? Z ? 28 (H–Ni) and secondary neutrons through selected target materials. The coupling of the GCR extremes to HZETRN allows for the examination of the induced environment within the interior of an idealized spacecraft as approximated by a spherical shell shield, and the effects of the aluminum equivalent approximation for a good polymeric shield material such as generic polyethylene (PE). The shield thickness is represented by a 25 g/cm² spherical shell. Although, one could imagine the progression to greater thickness, the current range will be sufficient to evaluate the qualitative usefulness of the aluminum equivalent approximation. Upon establishing the inaccuracies of the aluminum equivalent approximation through numerical simulations of the GCR radiation field attenuation for PE and aluminum equivalent PE spherical shells, we further present results for a limited set of commercially available, hydrogen rich, multifunctional polymeric constituents to assess the effect of the aluminum equivalent approximation on their radiation attenuation response as compared to the generic PE.     

Overview of nuclear fragmentation models and needs.

It has been known for some time that adequate assessment of spacecraft shield requirements and concomitant estimates of astronauts radiation exposures from galactic cosmic radiation requires accurate, quantitative methods for characterizing these radiation fields as they pass through thick absorbers. The main nuclear interaction processes involved are (1) nuclear elastic and inelastic collisions, and (2) nuclear breakup (fragmentation) and electromagnetic dissociation (EMD). Nuclear fragmentation and EMD are important because they alter the elemental and isotopic composition of the transported radiation fields. At present, there is no suitably accurate theory for predicting nuclear fragmentation cross sections for all collision pairs and energies of interest in space radiation protection. Typical cross-section differences between theory and experiment range from about 25 percent to a factor of two. The resulting errors in transported flux, for high linear energy transfer (LET) particles, are comparble to these cross-section errors. In this overview, theoretical models of heavy ion fragmentation currently used to generate input data bases for cosmic-ray transport and shielding codes are reviewed. Their shortcomings are discussed. Further actions needed to improve their accuracy and generality are presented.     

Deep space environments for human exploration.

Mission scenarios outside the Earth's protective magnetic shield are being studied. Included are high usage assets in the near-Earth environment for casual trips, for research, and for commercial/operational platforms, in which career exposures will be multi-mission determined over the astronaut's lifetime. The operational platforms will serve as launching points for deep space exploration missions, characterized by a single long-duration mission during the astronaut's career. The exploration beyond these operational platforms will include missions to planets, asteroids, and planetary satellites. The interplanetary environment is evaluated using convective diffusion theory. Local environments for each celestial body are modeled by using results from the most recent targeted spacecraft, and integrated into the design environments. Design scenarios are then evaluated for these missions. The underlying assumptions in arriving at the model environments and their impact on mission exposures within various shield materials will be discussed.     

Study of the radiation environment on MIR space station with SILEYE-2 experiment.

In this work we present preliminary results of nuclear composition measurements on board space station MIR obtained with SILEYE-2 particle telescope. SILEYE-2 was placed on MIR in 1997 and has been working since then. It consists of an array of 6 active silicon strip detectors which allow nuclear and energetic identification of cosmic rays in the energy range between approximately 30 and 200 MeV/n. The device is attached to an helmet and connected to an eye mask which shields the cosmonaut eyes from light and allow studies of the Light Flashes (LF) phenomenon. In addition to the study of the causes of LF, the device is used to perform real time long term radiation environment monitoring inside the MIR, performing measurements in solar quiet and active days.