基于硬脂酸复合相变材料的被动热沉性能

固液相变储能材料的被动热沉广泛应用于航空航天及军事装备领域。针对高热流密度电子芯片的被动温控问题,对比实验验证了单温度和双温度2种数值模拟方法对基于泡沫铜/硬脂酸复合相变材料被动热沉控温过程模拟的准确性。结合基于Maxwell-Garnett模型的EMT建立了石墨烯纳米片/硬脂酸复合相变材料物性,采用更为精确的双温度数值模拟方法分析了不同导热强化方式的控温效果,并研究了环境温度对热沉控温效果的影响。结果表明:高热流密度下的相变温控过程采用双温度数值模拟更为精确;当导热增强体的体积组分相同时,提高泡沫金属的孔密度对相变温控效果提升有限,而同时采用泡沫金属与石墨烯纳米片能更有效改善相变控温效果;环境温度的剧烈变化对温控时间和控温温度均能产生影响。      

空间Kapton材料的原子氧、温度、紫外效应试验研究

主要通过灯丝放电磁场约束型原子氧剥蚀效应地面模拟设备模拟空间环境,对空间常用材料Kapton进行了原子氧剥蚀效应、温度升高对材料原子氧效应的影响试验以及原子氧与紫外辐射复合效应试验,对试验前后试样的外观、质量及表面形貌进行了比较,得出了材料在设备中的反应特点以及温度变化、紫外辐射对材料的原子氧效应的影响规律.同时测量了原子氧暴露试验前后、原子氧与紫外辐射复合作用前后试样的反射率和透射率,并进行了比较.      

2008年4月24日行星际激波事件相关联的超热电子90°投掷角的增强

利用测试粒子数值模拟的方法研究了与STEREO-A卫星观测到的2008年4月24日行星际激波事件相关联的超热电子90°投掷角的增强.根据激波到达前给定时刻超热电子的观测分布,拟合得到不同投掷角的初始分布函数;在给定的激波参数下,采用时间向后的方法计算特定能道上激波下游超热电子的投掷角分布.由于超热电子具有较高的共振频率,模拟采用的磁场湍流谱包含了低能电子发生共振的耗散区.对以215.76,151.67,106.63,eV为中心的三个能道进行了模拟.结果表明,不同能道上超热电子在激波下游的投掷角分布均在90°投掷角附近出现峰值,呈现出明显的90°投掷角增强,这与观测结果符合得很好.可以认为在激波对电子的加速过程中,电子与湍流耗散区的共振对90°投掷角的增强具有重要作用.      

屏蔽材料对木星轨道卫星内部介质充电效应的影响研究

在木星轨道的空间辐射环境中，占主导地位的粒子是能量大于1MeV（甚至高于100MeV）的高能电子，这可能会产生卫星内部介质充电效应。在卫星的防辐射设计中，通常需要一定厚度的材料来屏蔽这些电子，使得进入卫星内部的电子通量达到安全的水平。利用所建立的GEANT4-RIC（radiation induced conductivity）方法，研究了运行于木星轨道的卫星对高能电子的最佳屏蔽材料设计。研究了铝、钛、铁、铜、钽和铅作为卫星屏蔽材料的可能性。研究结果表明，在木星探测任务中，为了减轻卫星内部介质充电效应，高原子序数材料比低原子序数材料在相同质量下提供的屏蔽效果更好。因此，用钛、铁、铜、钽或铅代替地球轨道卫星上常用的屏蔽材料铝，可以节省屏蔽质量。     

航天器介质放电脉冲频谱特征实验研究

空间电子辐射环境下,航天器介质的充放电效应是威胁航天器安全的重要因素.介质放电现象除与材料参数及构型相关外,还与空间电子环境密切相关.本文通过电子枪和Sr90放射源在地面实验装置上模拟空间电子辐照环境,测试了环氧树脂、聚四氟乙烯、聚酰亚胺等常见空间材料在不同温度、不同电子能量和电子束流强度影响下的放电脉冲,并对放电电流脉冲和电场脉冲进行频谱分析.实验分析结果表明,介质材料的放电电流脉冲频谱具有明显的单峰结构,该峰值与材料厚度和入射电子能量相关,但受材料温度和辐照束流强度影响不大.      

航天器介质深层充电模拟研究

针对航天器介质深层充电问题,提出了一种基于蒙特卡罗模拟和充电动力学RIC模型的介质电荷分布及电场预估新方法,利用地面试验验证了其正确性.航天器介质平板充电过程被简化为屏蔽铝板与分层介质组成的Geant 4模型,通过统计方法计算出了实际入射束流下Teflon介质内的注入电流密度和剂量率分布曲线,利用RIC模型获得了背面接地时介质中的电荷密度和电场分布,利用脉冲电声法(PEA)对不同束流密度辐照下的Teflon内部空间电荷密度进行了测量.数值模拟和地面试验结果表明,Teflon在100 keV能量电子辐照下,电荷密度和电场随着束流密度的增加而不断增大,其电荷密度峰值位置约为0.042 mm,且背面接地时接地侧电场最大.由于Geant 4粒子输运模拟和RIC模型具有通用性,因此该方法适用于各种航天器介质材料.      

航天器介质材料深层充放电实验与数值模拟

空间辐射环境中高能电子诱发的介质材料深层充放电效应是威胁航天器安全的重要因素之一. 本文采用不同束流强度的电子枪电子, 研究了不同厚度的聚酰亚胺薄膜的深层充电过程; 利用Sr90放射源电子模拟GEO轨道高能电子环境, 研究了在其辐照下聚甲醛树脂和聚四氟乙烯材料的表面电位变化; 实验观测了深层放电产生的电流脉冲和电场脉冲. 提出了深层充电模型, 较好地模拟了实验测量结果, 并且分析了深层充电平衡电位和平衡时间随电子束流强度和介质电阻率的变化规律. 实验和数值模拟结果初步揭示了深层充放电效应的特征及规律, 表明深层充电现象随着电子束流强度和介质电阻率的增加而趋于明显, 介质电阻率是影响深层充电平衡电位和平衡时间的主要因素.      

空间材料实验炉的模拟热分析与地面试验分析

空间材料实验炉的温度分布对空间材料制备至关重要.通过对用于天宫二号空间实验室材料实验炉的物理模型进行合理简化,建立了三维传热数值计算模型,测量了实验炉材料的热物性参数,并根据地面试验工况进行模拟热分析计算,其结果能够很好地与地面试验结果吻合.采用模拟计算的方法分析样品物性参数对炉膛和样品中温度分布的影响,对实验炉的隔热部件进行优化设计,进而对炉体外表面温度进行了预测.数值仿真计算弥补了实验中测温点不足的问题,有助于进一步了解样品的温度分布,同时为实验炉隔热优化设计和安全运行提供了依据.      

稳态等离子体推进器羽流场数值模拟

采用二维轴对称模型,使用粒子网格法(PIC)和直接模拟蒙特卡洛法(DSMC)相结合的方法,对稳态等离子体推进器(SPT)羽流场进行了数值模拟.采用DSMC方法中的随机取样频率法(RSF)求解粒子碰撞过程,并对比了不同的分配电荷方式、电子运动模型及SPT出口条件时的羽流场.将不同条件计算得到的羽流场中距SPT出口0.1?m,0.5?m及1.0?m处的离子电流密度和电荷密度与实验结果进行了对比,得出在采用面积权重法分配电荷、等熵模型描述电子运动和用实验值设定发动机出口参数时对SPT羽流场数值模拟的电流密度和轴向附近的电荷密度结果与实验结果符合程度较好的结论.     

Multifunctional Martian habitat composite material synthesized from in situ resources

The two primary requirements for a Martian habitat structure include effective radiation shielding against the Galactic Cosmic Ray (GCR) environment and sufficient structural and thermal integrity. To significantly reduce the cost associated with transportation of such materials and structures from earth, it is imperative that such building materials should be synthesized primarily from Martian in situ resources. This paper illustrates the feasibility of such an approach. Experimental results are discussed to demonstrate the synthesis of polyethylene (PE) from a simulated Martian atmosphere and the fabrication of a composite material using simulated Martian regolith with PE as the binding material. The radiation shielding effectiveness of the proposed composites is analyzed using results from radiation transport codes and exposure of the samples to high-energy beams that serve as a terrestrial proxy for the GCR environment. Mechanical and ballistic impact resistance properties of the proposed composite as a function of composition, processing parameters, and thermal variations are also discussed to evaluate the multifunctionality of such in situ synthesized composite materials.     

Implementation of ALARA radiation protection on the ISS through polyethylene shielding augmentation of the Service Module Crew Quarters.

With 5-7 month long duration missions at 51.6 degrees inclination in Low Earth Orbit, the ionizing radiation levels to which International Space Station (ISS) crewmembers are exposed will be the highest planned occupational exposures in the world. Even with the expectation that regulatory dose limits will not be exceeded during a single tour of duty aboard the ISS, the "as low as reasonably achievable" (ALARA) precept requires that radiological risks be minimized when possible through a dose optimization process. Judicious placement of efficient shielding materials in locations where crewmembers sleep, rest, or work is an important means for implementing ALARA for spaceflight. Polyethylene (CnHn) is a relatively inexpensive, stable, and, with a low atomic number, an effective shielding material that has been certified for use aboard the ISS. Several designs for placement of slabs or walls of polyethylene have been evaluated for radiation exposure reduction in the Crew Quarters (CQ) of the Zvezda (Star) Service Module. Optimization of shield designs relies on accurate characterization of the expected primary and secondary particle environment and modeling of the predicted radiobiological responses of critical organs and tissues. Results of the studies shown herein indicate that 20% or more reduction in equivalent dose to the CQ occupant is achievable. These results suggest that shielding design and risk analysis are necessary measures for reducing long-term radiological risks to ISS inhabitants and for meeting legal ALARA requirements. Verification of shield concepts requires results from specific designs to be compared with onboard dosimetry.     

Materials trade study for lunar/gateway missions.

The National Aeronautics and Space Administration (NASA) administrator has identified protection from radiation hazards as one of the two biggest problems of the agency with respect to human deep space missions. The intensity and strength of cosmic radiation in deep space makes this a 'must solve' problem for space missions. The Moon and two Earth-Moon Lagrange points near Moon are being proposed as hubs for deep space missions. The focus of this study is to identify approaches to protecting astronauts and habitats from adverse effects from space radiation both for single missions and multiple missions for career astronauts to these destinations. As the great cost of added radiation shielding is a potential limiting factor in deep space missions, reduction of mass, without compromising safety, is of paramount importance. The choice of material and selection of the crew profile play major roles in design and mission operations. Material trade studies in shield design over multi-segmented missions involving multiple work and living areas in the transport and duty phase of space mission's to two Earth-Moon co-linear Lagrange points (L1) between Earth and the Moon and (L2) on back side of the moon as seen from Earth, and to the Moon have been studied. It is found that, for single missions, current state-of-the-art knowledge of material provides adequate shielding. On the other hand, the choice of shield material is absolutely critical for career astronauts and revolutionary materials need to be developed for these missions. This study also provides a guide to the effectiveness of multifunctional materials in preparation for more detailed geometry studies in progress.     

Ground-based simulations of galactic cosmic ray fragmentation and transport.

Since mean free paths for nuclear fragmentation are of the order of the ranges of primary Galactic Cosmic Ray (GCR) nuclei, determination of the radiation field produced by successive fragmentations of nuclei in material and tissue is essential to accurate assessment of GCR radiation risk to humans on long-duration missions outside the geomagnetosphere. We describe some recent measurements made at the Bevalac of heavy ion transport through materials, with representative results and examples of how they may be applied to aspects of the space radiation problem, including efforts to devise analytical tools for predicting biological effects and for designing spacecraft shielding.     

Design and performance of a vacuum-UV simulator for material testing under space conditions

This paper describes the construction and performance of a VUV-simulator that has been designed to study degradation of materials under space conditions. It is part of the Complex Irradiation Facility at DLR in Bremen, Germany, that has been built for testing of material under irradiation in the complete UV-range as well as under proton and electron irradiation. Presently available UV-sources used for material tests do not allow the irradiation with wavelengths smaller than about 115 nm where common Deuterium lamps show an intensity cut-off. The VUV-simulator generates radiation by excitation of a gas-flow with an electron beam. The intensity of the radiation can be varied by manipulating the gas-flow and/or the electron beam.     

卫星柔性热控材料性能及其稳定性研究

阐述热控材料的性能以及它在空间模拟环境下的稳定性。测试表明所镀制的立品其光、热、电性能很好，且在模拟空间环境下，如电子辐照、紫外辐照、原子氧作用以及湿热环境下其稳定性能优良。AFM分析表明，镀膜方法和工艺对制备高质量TO膜和高反射Al膜十分重要。     

Electrostatic space radiation shielding

For the success of NASA’s new vision for space exploration to Moon, Mars and beyond, exposures from the hazards of severe space radiation in deep space long duration missions is ‘a must solve’ problem. The payload penalty demands a very stringent requirement on the design of the spacecrafts for human deep space missions. The exploration beyond low Earth orbit (LEO) to enable routine access of space will require protection from the hazards of the accumulated exposures of space radiation, Galactic Cosmic Rays (GCR) and Solar Particle Events (SPE), and minimizing the production of secondary radiation is a great advantage. There is a need to look to new horizons for newer technologies. The present investigation revisits electrostatic active radiation shielding and explores the feasibility of using the electrostatic shielding in concert with the state-of-the-art materials shielding and protection technologies. The full space radiation environment has been used, for the first time, to explore the feasibility of electrostatic shielding. The goal is to repel enough positive charge ions so that they miss the spacecraft without attracting thermal electrons. Conclusions are drawn for the future directions of space radiation protection.     

HZE-dosimetry on MIR92, IML-1 and D-2

Nuclear track detectors were used to measure the integral Linear Energy Transfer (LET) spectra above 1 GeV per cm water behind the complex material shielding inside a spacecraft. The measurements are compared with predictions of the contribution of high charge, high energy HZE particles of the galactic cosmic radiation taking into account the influence of solar and geomagnetic modulation and shielding by matter.     

Comparison of measured cosmic ray LET spectra with models and predictions.

Radiation effects of cosmic ray nuclei are generally described as a function of the particle LET. For a large number of space missions LET spectra have been measured and models have been developed to calculate these spectra that include the effects of geomagnetic shielding and shielding provided by material. In this paper we compare measured and calculated LET spectra. For low earth orbits events with high local energy deposition, i.e., short range secondaries, contribute significantly to the measured spectra. These events are produced by nuclear interactions, mainly induced by protons from the south atlantic anomaly. The technique to include these contributions in the models depends on the size of radiation sensitive volumes. For sizes comparable to or larger than the range of target secondaries it is essential to separate contributions by target interactions from those of cosmic rays. This separation is possible in experiments which use stacks of plastic nuclear track detectors. The yield of short range events generated by protons and measured in the detector can be calibrated from accelerator experimental data. We present first results for CR-39 detectors.