Gamma rays from accreting matter onto collapsed objects

In the spherical accretion onto massive objects, the matter may be heated up to temperatures as high as 10¹² °K. In such a hot plasma, the thermal bremsstrahlung (e-e and e-p) and π° decay from inelastic collisions of protons are the main γ-ray sources. We determined the γ -ray production spectra from the π° decay and from bremsstrahlung for different temperatures. The expected γ-ray spectra were evaluated too in order to fit experimental data. We have fitted COS B data from 3C 273 using a two temperatures plasma model. The best fit is for

Full-size image (1K)

(M₈ is the black hole mass in 10⁸ M) which gives . The hard X-ray measurements do not contradict the bremsstrahlung spectrum.     

Summary of the workshop on gamma-ray burst afterglows at the 34th COSPAR meeting

A summary is given of the presentations at the COSPAR workshop on γ-ray bursts with some personal commentary on the contributions, the SN/GRB connection, and on the role of magnetic fields in γ-ray bursts and their afterglows. Of special interest were the accumulated arguments for strong collimation and associated reduction in the total required energy for γ-ray bursts. Significant discussion was also devoted to the issues associated with iron and metal lines in X-ray spectra. It is important to note that some of the afterglows seem to require ambient densities 1 g cm⁻³, rather incompatible with a massive star environment. Of associated difficulty is the fact that few, if any, afterglows seem consistent with the r⁻² wind expected for a massive star model. There are reasons to think that if γ-ray bursts are associated with supernovae they are of Type Ic. This suggests that any wind present might be rich in carbon and oxygen, not hydrogen or helium. If γ-ray bursts are narrowly collimated, then the burst is only probing a small portion of any wind, perhaps just that time-dependent and isotropic structure directly along the rotation axis. The characteristics of “hypernovae” may be the result of orientation effects in a mildly inhomogeneous set of progenitors, rather than requiring an excessive total energy or luminosity. The recent event GRB 021004 provided a rich photometric and spectroscopic record and perhaps the most direct evidence yet for the association of a specific γ-ray burst with a massive star progenitor. If the magnetic field plays a significant role in launching a relativistic γ-ray burst jet from within a collapsing star, then the magnetic field may also play a role in the propagation, collimation, and stability of that jet within and beyond the star. The magneto-rotational instability (MRI) can operate under conditions of moderate rotation. This means that the MRI will be at work generating strong fields exponentially rapidly even as the disk of material begins to form and makes a transition from a non-Keplerian to quasi-Keplerian flow in the collapsar and related models.     

High-cadence Hα imaging of solar flares

The Hα observation is a powerful tool to study the high-energy aspect of solar flares. Spiky brightenings of flare kernels at the Hα center reflect the rapid fluctuation in particle acceleration; linear polarization of Hα emission might be evidence of accelerated protons; red-shifts of the Hα line are caused by the chromospheric evaporation. To study the spiky brightenings of flare kernels with high-cadence imaging at the Hα center, a high-speed Hα camera for the Solar Flare Telescope at Mitaka, NAOJ, had been developed and it started the regular observation in 2001 July. However, the polarimetry and the Dopplermetry are also important and they are required to be carried out in parallel with the high-cadence imaging at the Hα center. Then, we upgraded the original high-speed Hα camera to a new Hα camera system for the multi-aspect Hα observations, which performs all of the high-cadence imaging, the linear polarization measurements, and the off-band imaging for velocity measurements. The new system started the observation in 2002 July. In this paper, the multi-aspect Hα imaging system is described and sample Hα images are presented.     

ESA UGI (Unified-GNSS-Ionosphere): An open-source software to compute precise ionosphere estimates

Ionospheric estimation is becoming more and more important for the new multifrequency positioning algorithms, since they can help to improve greatly the convergence time for acquiring a good positioning error. In this paper, an open source tool to estimate precise ionospheric estimates is presented, namely ESA UGI (Unified-GNSS-Ionosphere). The presentation is done jointly with a methodology to test ionospheric model using a modified NeQuick to generate synthetic data. The results with different option of the ESA UGI shows that it has a good performance below 1 TECU (Total Electron Content Units) in vTEC (vertical Total Electron Content) RMS (Root Mean Squared) for European networks, around 2 TECU in a well-covered African region and between 1 and 6 TECU globally with this synthetic data. It shows as well the capability of changing between different ionosphere models (voxel, multilayer and spherical harmonics) and configuration options. Finally, a test with uncombined PPP actual data is presented showing that instantaneous convergence below 30 cm in 3D RMS position error are achievable in a well sounded area in Europe.     

Detection of aerosol pollution sources during sandstorms in Northwestern China using remote sensed and model simulated data

The present paper has used a comprehensive approach to study atmosphere pollution sources including the study of vertical distribution characteristics, the epicenters of occurrence and transport of atmospheric aerosol in North-West China under intensive dust storm registered in all cities of the region in April 2014. To achieve this goal, the remote sensing data using Moderate Resolution Imaging Spectroradiometer satellite (MODIS) as well as model-simulated data, were used, which facilitate tracking the sources, routes, and spatial extent of dust storms. The results of the study have shown strong territory pollution with aerosol during sandstorm. According to ground-based air quality monitoring stations data, concentrations of PM₁₀ and PM_2.5 exceeded 400?μg/m³ and 150?μg/m³, respectively, the ratio PM_2.5/PM₁₀ being within the range of 0.123–0.661. According to MODIS/Terra Collection 6 Level-2 aerosol products data and the Deep Blue algorithm data, the aerosol optical depth (AOD) at 550?nm in the pollution epicenter was within 0.75–1. The vertical distribution of aerosols indicates that the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) 532?nm total attenuates backscatter coefficient ranges from 0.01 to 0.0001?km^?1?×?sr^?1 with the distribution of the main types of aerosols in the troposphere of the region within 0–12.5?km, where the most severe aerosol contamination is observed in the lower troposphere (at 3–6?km). According to satellite sounding and model-simulated data, the sources of pollution are the deserted regions of Northern and Northwestern China.     

γ-ray spectroscopy in Mars orbit during solar proton events

Understanding the evolution of Mars requires determining the composition of the surface and atmosphere of the planet. The European Space Agency’s ExoMars rover mission, which is expected to launch in 2016, is part of the Aurora programme. The instruments on the rover will search for evidence of life on Mars and will map a sub-section of the Martian surface, extracting compositional information. Currently our understanding of the bulk composition (and mineralogy) of Mars relies on orbital data from instruments on-board satellites such as 2001 Mars Odyssey, Mars Reconnaissance Orbiter and Mars Express, in addition to in-situ instrumentation on rovers such as Spirit and Opportunity. γ-ray spectroscopy can be used to determine the composition of Mars, but it has yet to be successfully carried out in-situ on Mars. This study describes some of the results obtained from the γ-ray spectrometer on 2001 Mars Odyssey during solar proton events and discusses whether the increased emissions are useful in γ-ray spectroscopy. The study shows that although increased γ-ray emissions were expected from the Martian surface during a solar proton event, they were not detected from orbit probably due to insufficient signal-to-background. However, this does not preclude the possibility of measuring changes in γ-ray flux corresponding to changes in solar activity on the surface of the planet.     

Two years of INTEGRAL result on X-ray binaries

INTEGRAL is the ESA lead International Gamma-Ray Astrophysical Laboratory, successfully launched the 17th October 2002 from Baikonur with a Proton vehicle. In view of the high sensitivity of the two γ-ray instruments IBIS and SPI and their capability to provide at the same time image, spectra and time profiles of all the sources in their wide field of view, a key project was approved as “Core Programme” to obtain deep observations of the Galactic Centre (GCDE) and to exploit regular scan of the whole Galaxy Plane since the beginning of the mission. This paper will briefly review the main astrophysical results obtained in the field of high energy Galactic sources with the INTEGRAL/IBIS γ-ray Imager onboard INTEGRAL, and make a comparison with the previous scenario depicted by the BeppoSAX and RXTE results.     

核磁共振陀螺高精度磁场驱动技术

核磁共振陀螺（NMRG）是利用激光与核磁共振气室中的碱金属原子和惰性气体原子的相互作用使核子以拉莫尔频率进动,并通过磁场驱动技术对气室磁场实现闭环控制和对剩磁进行补偿来维持核子的共振状态,进而能够检测载体的角速度信息。磁场驱动技术作为磁场闭环控制的重要部分,直接影响核磁共振陀螺的磁场控制精度和稳定性。为了解决核磁共振陀螺磁场控制精度和稳定性不足的关键问题,采用交直流分离设计的压控电流源方案改善磁场驱动问题,基于噪声分析理论对电路进行建模和噪声分析,并通过实验验证对三轴线圈的横向磁场控制精度达±0.046 2 nT,纵向磁场控制精度为±0.003 1 nT,实验证明该技术方案具有较强的工程应用价值。      

Puzzles of the cosmic ray anisotropy

We discuss three of the known puzzles of the cosmic ray anisotropy in the PeV and sub-PeV energy region. They are (1) the so called inverse anisotropy, (2) the irregularity in the energy dependence of the amplitude and phase of the first harmonic and (3) the contribution of the single source.     

Satellite availability and positioning performance of uncombined precise point positioning using BeiDou-2 and BeiDou-3 multi-frequency signals

To realize the smooth transition from regional BeiDou Navigation Satellite System (BDS-2) to the global one (BDS-3), the integration of BDS-2 and BDS-3 is important for providing continuous, stable and reliable positioning, navigation and timing (PNT) services for global users. This work used 154 globally distributed multi-GNSS (Global Navigation Satellite System) experiment stations spanning 30 days to analyze the satellite availability and positioning performance of uncombined precise point positioning (UC-PPP) under current BDS-2 and BDS-3 constellations. We focused on three issues: the influence of BDS-3 receiver tracking abilities, the positioning performance among different areas, and the benefit of multi-frequency observations. The results show that the elliptical zone caused by poor BDS-2 satellite visibility is disappeared when the evenly distributed BDS-3 medium earth orbit satellites are introduced. When BDS-3 are integrated with BDS-2, the area with the Position Dilution of Precision (PDOP) less than 2 can be expanded to 75° S-75° N and 30° E-150° W. The positioning performance of BDS-3 and BDS-2/BDS-3 UC-PPP are seriously affected by the receiver tracking abilities of BDS-3 signals. When the maximum pseudo-random noise sequences (PRNs) of BDS-3 satellites tracked by stations are within 30 or 37, the positioning accuracy of static UC-PPP can be improved by 22.94% or 8.27% due to the integration of BDS-2 and BDS-3. Besides, the most improvement of BDS-2 and BDS-3 integration is achieved in Asia-Pacific regions, especially for the kinematic UC-PPP or the poor receiver tracking abilities of BDS-3. Similar to the multi-frequency BDS-2 UC-PPP, the benefit of multi-frequency signals for BDS-3 or BDS-2/BDS-3 UC-PPP is also non-vital. The three-dimensional positioning accuracy of BDS-2/BDS-3 multi-frequency UC-PPP in static mode and kinematic mode are 2.24 cm and 5.39 cm, while the corresponding convergence time are 49.62 min and 73.80 min, respectively. Compared with BDS-2, both the positioning accuracy and the convergence time of BDS-2/BDS-3 joint UC-PPP are improved by approximately over 50%, which indicates that BDS-3 has a great potential to provide high-quality PNT services as other global navigation satellite systems.     

Performance assessment of real-time orbit determination for the Haiyang-2D using onboard BDS-3/GPS observations

The Global Navigation Satellite System (GNSS) receivers equipped on the Haiyang-2D (HY-2D) satellite is capable of tracking the signals of both the third generation of BeiDou satellite navigation System (BDS-3) and the Global Positioning System (GPS), which make it feasible to assess the performance of real-time orbit determination (RTOD) for the HY-2D using onboard GNSS observations. In this study, the achievable accuracy and convergence time of RTOD for the HY-2D using onboard BDS-3 and GPS observations are analyzed. Benefiting from the binary-offset-carrier (BOC) modulation, the BDS-3 C1X signal includes less noise than the GPS C1C signal, which has the same signal frequency and chipping rate. The root mean squares (RMS) of the noises of C1X and C1C code measurements are 0.579 m and 1.636 m, respectively. Thanks to a ten-times higher chipping rate, the code measurements of BDS-3 C5P, GPS C1W and C2W are less noisy. The RMS of code noises of BDS-3 C5P, GPS C1W, and C2W are 0.044 m, 0.386 m, and 0.272 m, respectively. For the HY-2D orbit, the three-dimensional (3D) and radial accuracies can reach 31.8 cm and 7.5 cm with only BDS-3 observations, around 50 % better than the corresponding accuracies with GPS. Better performance of the BDS-3 in RTOD for the HY-2D is attributed to the high quality of its broadcast ephemeris. When random parameters are used to absorb ephemeris errors, substantial improvement is seen in the accuracy of HY-2D orbit with either BDS-3 or GPS. The 3D RMS of HY-2D orbit errors with BDS-3 and GPS are enhanced to 23.1 cm and 33.6 cm, and the RMS of the radial components are improved to 6.1 cm and 13.3 cm, respectively. The convergence time is 41.6 and 75.5 min for the RTOD with BDS-3 and GPS, while it is reduced to 39.2 and 27.4 min after the broadcast ephemeris errors are absorbed by random parameters. Overall, the achievable accuracy of RTOD with BDS-3 reaches decimeter level, which is even better than that with GPS, making real-time navigation using onboard BDS-3 observations a feasible choice for future remote sensing missions.     

BDS-2/BDS-3 uncalibrated phase delay estimation considering the intra-system bias

Intra-system biases (ISBs) between BDS-2 and BDS-3 are of critical importance when combining observations from the BDS-2 and BDS-3 systems, which is meaningful to fully take advantage of the BDS positioning capability. Meanwhile, ISBs should also be considered in the estimation of BDS uncalibrated phase delays (UPDs). In this research, we present a BDS-2/BDS-3 joint-processing scheme, as well as a method for estimating BDS UPDs. The characteristics of ISBs and the quality of BDS UPDs are analyzed based on 30-day data from 130 multi-GNSS experimental (MGEX) stations. Our results indicate that the ISBs are related to the type and version of the receiver. The ISBs can be regarded as constant across the course of a given day, and the mean standard deviation (STD) values of ISBs over one month for different types of receivers are generally within 0.2 m. Moreover, to assess the quality of UPD products, the residuals of the estimated UPDs and the utilization rates of the observation data are computed. The results show that the quality of BDS UPDs can be improved by correcting the satellite-induced pseudo-range variations, and by estimating the wide-lane (WL) UPD difference between BDS-2 and BDS-3. The average RMS values of the estimated residuals of WL UPD and narrow-lane (NL) UPD are 0.07 and 0.09 cycles, respectively; moreover, the utilization rate of the observation data of WL UPD and NL UPD can reach above 90 %. The performance of BDS precise point positioning (PPP) and PPP ambiguity resolution (PPP-AR) is analyzed in terms of positioning accuracy and convergence performance in both the static and kinematic modes. Compared with PPP ambiguity-float solutions, the positioning accuracy of PPP-AR is significantly improved, especially in the east direction. The impact of ISBs on PPP and PPP-AR is also analyzed, and the results indicate that ISBs can improve the convergence speed of float PPP, but can be disregarded in PPP-AR.     

Assessing attitude error of FORMOSAT-3/COSMIC satellites and its impact on orbit determination

An attitude determination and control system (ADCS) is critical to satellite attitude maneuvers and to the coordinate transformation from the inertial frame to the spacecraft frame. This paper shows specific sensors in the ADCS of the satellite mission FORMOSAT-3/COSMIC (F3/C) and the impact of the ADCS quality on orbit accuracy. The selection of main POD antenna depends on the beta angles of the different F3/C satellites (for FM2 and FM4) during the inflight phase. In particular, under the eclipse, alternative attitude sensors are activated to replace the Sun sensors, and such a sensor change leads to anomalous GPS phase residuals and a degraded orbit accuracy. Since the nominal attitude serves as a reference for ADCS, the 3-dimensional attitude-induced errors in reduced dynamic orbits over selected days in 2010 show 9.35, 10.78, 4.97, 5.48, 7.18, and 6.89 cm for FM1–FM6. Besides, the 3-dimensional velocity errors induced by the attitude effect are 0.10, 0.10, 0.07, 0.08, 0.09, and 0.10 for FM1–FM6. We analyze the quality of the observed attitude transformation matrix of F3/C and its impact on kinematic orbit determination. With 249 days of GPS in 2008, the analysis leads to the following averaged 3-dimensional attitude-induced orbit errors: 2.72, 2.62, 2.37, 1.90, 1.70, and 1.99 cm for satellites FM1–FM6. Critical suggestions of geodetic payloads for the follow-on mission of F3/C are presented based on the current result.     

激光快速熔凝Al2O3/YAG共晶陶瓷的制备与组织

采用激光快速熔凝技术制备Al₂O₃/YAG共晶自生复合陶瓷, 研究Al₂O₃/YAG共晶陶瓷在高能激光束作用下,不同扫描速率(0.01~2.0mm/s)、超高温度梯度下的凝固组织特征及其生长机制,探索激光熔凝过程控制参数与凝固组织的关系.研究结果表明:激光熔凝Al₂O₃/YAG共晶陶瓷由无规则连续分布的Al₂O₃相和YAG相两相组成,没有晶界和其他相,Al₂O₃相的体积分数为(45.0±2.0)%,两相耦合生长,交错分布,是典型的快速凝固层片状非规则共晶组织;共晶层间距细密, 并随激光扫描速度的增大而减小,扫描速度为0.02mm/s 时,共晶间距约为1~2μm,扫描速度为2.0mm/s时,共晶间距仅为0.5μm左右;综合热分析表明,Al₂O₃/YAG共晶熔点为2096K,与相图吻合.     

面向地震应急响应的松耦合研判模型管理机制

由于面向地震应急响应系统(EERS)的研判模型有其自身特点,传统决策支持系统中模型管理方法并不能较好地满足其管理需求。提出一种面向地震应急响应的松耦合研判模型管理机制(LC-MM),包括3个部分:(1)研判资源建模环境,由研判模型描述/控制语言(MDCL)和数据源描述/控制语言(DSDCL)组成;(2)研判资源协同交互框架,该框架分为4层,主要包括应用环境上下文App_Context、模型调用者Model_Invoker和数据通道Data_Channel 3个Agent组件;(3)研判资源协同交互协议,该协议将研判任务、研判模型和数据源的紧耦合关系分解为上述Agent组件之间的协同交互关系。实际应用表明,LC-MM能够有效屏蔽研判资源的异构性,提高EERS的可扩展性、动态适应性以及平台无关性,能够较好地满足EERS中研判模型的管理需求。     

REM/ROSS: a powerful tool for monitoring the prompt afterglow of γ-ray bursts

Observations of the prompt afterglow of γ-ray burst events are unanimously considered of paramount importance for GRB science and cosmology. Such observations at NIR wavelengths are even more promising allowing the monitoring of high-z Ly- absorbed bursts as well as events occurring in dusty star-forming regions. In these pages we present rapid eye mount (REM), a fully robotized fast slewing telescope equipped with a high throughput NIR (Z, J, H, K) camera dedicated to detecting the prompt IR afterglow. REM can discover objects at extremely high redshift and trigger large telescopes to observe them. The REM telescope will simultaneously feed REM optical slitless spectrograph (ROSS) via a dichroic. ROSS will intensively monitor the prompt optical continuum of GRB afterglows. The synergy between the REM-IR camera and the ROSS spectrograph makes REM a powerful observing tool for any kind of fast transient phenomena. Beside its ambitious scientific goals, REM is also technically challenging since it represent the first attempt to locate a NIR camera on a small telescope providing, with ROSS, unprecedented simultaneous wavelength coverage on a telescope of this size.     

三维五向编织复合材料的弹性性能

根据实际编织工艺和编织预制件的细观结构模型,利用刚度等效的思想,导出了三维五向编织复合材料的刚度矩阵并计算了其弹性常数.在此基础上,对比分析了三维五向和三维四向编织复合材料的弹性常数随编织角及纤维体积分数的变化规律,讨论了编织预制件的截面尺寸对三维五向编织复合材料弹性常数的影响.结果表明,三维五向编织复合材料在保持三维四向编织复合材料良好性能的同时对纵向力学性能进行了增强;编织预制件的截面尺寸只在较小的情况下才对编织复合材料的弹性常数影响较大.      

3D information from 2D images recorded in the European Modular Cultivation System on the ISS

The European Modular Cultivation System (EMCS) on the ISS allows long-term biological experiments, e.g. on plants. Video cameras provide near real-time 2D images from these experiments. A method to obtain 3D coordinates and stereoscopic images from these 2D images has been developed and is described in this paper. The procedure was developed to enhance the data output of the MULTIGEN-1 experiment in 2007. One of the main objectives of the experiment was to study growth movements of the Arabidopsis plants and the effect of gravity on these. 3D data were important during parts of the experiment and the paper presents the method developed to acquire 3D data, the accuracy of the data, limitations to the technique and ways to improve the accuracy. Sequences of 3D data obtained from the MULTIGEN-1 experiment are used to illustrate the potential of this newfound capability of the EMCS. In the experiment setup, a positional depth accuracy of about ±0.4 mm for relative object distances and an absolute depth accuracy of about ±1.4 mm for time dependent phenomena was reached. The ability to both view biological specimens in 3D as well as obtaining quantitative 3D data added greatly to the scientific output of the MULTIGEN-1 experiment. The uses of the technique to other researchers and their experiments are discussed.     

基于同波束干涉的空间三维相对位置测量研究

针对深空探测器相对位置精确测量需求,建立了空间三维相对位置测量模型,研究了基于单基线同波束干涉测量(Same-beam VLBI,SBI)的空间三维位置最小二乘解算方法。利用"嫦娥3号"着陆器的测控天线与定向天线的SBI实测数据,验证了测量模型与解算方法的有效性。结果显示:SBI干涉时延随机误差约0.225 ps(0.07 mm);测控天线与定向天线之间距离误差约0.216 m,方向误差约30.4°。该研究结果有望应用于后续深空探测任务譬如"嫦娥5号"器间高精度相对测量中。     

An introduction to China FY3 radio occultation mission and its measurement simulation

GNSS (Global Navigation Satellite System) radio occultation mission for remote sensing of the Earth’s atmosphere will be performed by GNOS (GNSS Occultation Sounder) instrument on China FengYun-3 (FY3) 02 series satellites, the first of which FY3-C will be launched in the year 2013. This paper describes the FY3 GNOS mission and presents some results of measurement simulation. The key designed specifications of GNOS are also shown. The main objective of simulation is to provide scientific support for GNOS occultation mission on the FY3-C satellites. We used EGOPS software to simulate occultation measurements according to GNOS designed parameters. We analyzed the accuracy of retrieval profiles based on two typical occultation events occurring in China South–East area among total simulated events. Comparisons between the retrieval atmospheric profiles and background profiles show that GNOS occultation has high accuracy in the troposphere and lower stratosphere. The sensitivities of refractivity to three types of instrumental error, i.e. Doppler biases, clock stability and local multipath, were analyzed. The results indicated that the Doppler biases introduced by along-ray velocity error and GNOS clock error were the primary error sources for FY3-C occultation mission.