Heterogeneous grain morphologies and acceleration mechanisms in cometary coma dust dynamics: Mass envelope dispersion

Modelling of the cometary coma with respect to the distribution of dust particles within the coma and tail have been performed by a number of authors /1,2,3/. Applications of the Divine model using a program coded for the Giotto DIDSY sensors have also been made to calculate expected sensor response of the instrument and spacecraft impact rates /4/. For a chosen mass of ～ 10^?10g we use the Divine Reference model /1/ to investigate the effect on the mass envelope of i) a velocity spread in dust particle ejection; and ii) a variation in the particle type. The results show that effects i) and ii) lead to a smoothing-out of the anticipated peak flux at an envelope boundary. A conceptual model to follow the formation and development of dust jets is also presented and effects illustrated for various nucleus rotation periods.     

A capacitor impact sensor (CIS) on board Giotto for detection of cometary dust particles

A low power high reliability impact sensor based on the discharge of a parallel plate capacitor is described. The choice of a surface area of about 1000 cm² and a penetration thickness of 50 micrometers will provide data on the flux density of cometary dust particles in the 5 micrometers diameter range (10⁻¹⁰g). A high noise immunity promotes excellent reliability under conditions of heavy spacecraft bombardment and high plasma densities in the late stages of the 500 km approach distance. Self-limiting of the event rate compression system also provides flux data at arbitrarily high impact rates. The capacitor sensor will be located on the external face of the outer dust shield of Giotto Spacecraft and it will be a part of the DIDSY experiment.     

Physical properties of cometary dust: Relation of DIDSY data to grain properties

The Dust Impact Detection System (DIDSY) for the Giotto Halley Mission consists of two types of sensors for the detection of cometary dust particles: two impact plasma sensors and five piezo-electric momentum sensors. One sensor of each type is covered by a penetration film. A 1 μm thick aluminum film covers an impact plasma sensor. One momentum sensor is mounted onto the rear shield behind the 1 mm front shield made from aluminum. The parameters measured are the total charge released upon impact and the amplitude of the acoustic signal generated by the impact. Both quantities depend on the mass and speed of the impacting particles. At the impact speed of 68 km/sec the mass of cometary dust particles can be determined in the mass range from 10⁻¹⁷ g to 10⁻³ g. From the difference in the countrates measured by the sensors with and without penetration film the average bulk density of dust particles of masses 10⁻¹⁴ g and 10⁻⁶ g can be determined. With appropriate calibration an accuracy of a factor of 2 for both the mass and density determination can be obtained.     

Giotto extended mission

The navigation of the ESA spacecraft Giotto to its encounter with comet P/Halley on 14 March 1986 required just 10% of the fuel available. Although the spacecraft was damaged by dust impacts during its close flyby at the nucleus of P/Halley it was retargeted to return close to Earth to maintain the option to extend the mission to encounter another comet, P/Grigg-Skjellerup on 10 July 1992.

On 2 April 1986 the spacecraft was put into hibernation configuration and had been orbiting the Sun in the ecliptic with an orbital period of 10 months. On 19 February 1990 it was reactivated, spacecraft subsystems and the payload checked out to determine its health status.

On 2 July 1990 Giotto performed succesfully the first-ever Earth gravity assist manoeuvre of a spacecraft approaching the Earth from deep space and was retargeted for comet P/Grigg--Skjellerup. It was concluded that the spacecraft is ready to provide valuable data during a potential encounter with a second comet.     

Cometary particle impact simulation using pulsed lasers

Calibration of the DIDSY experiment momentum sensors for the GIOTTO Mission to Comet Halley requires laboratory simulation of impacts at 68 km s⁻¹ for particle mass values in the range 10⁻⁶ g to 10⁻¹⁰ g. Existing techniques for particle acceleration cannot simultaneously attain these extreme values of velocity and particle mass, making it necessary to adopt some less direct method of impact simulation. This paper considers the application of high power pulsed lasers for laboratory simulation of the momentum impulse produced by a cometary dust particle impact on the GIOTTO spacecraft.     

The Giotto mission to Halley''s comet

ESA's Giotto mission to Halley's comet is a fast flyby in March 1986, about four weeks after the comet's perihelion passage when it is most active. The scientific payload comprises 10 experiments with a total mass of about 60 kg: a camera for imaging the comet nucleus, three mass spectrometers for analysis of the elemental and isotopic composition of the cometary gas and dust environment, various dust impact detectors, a photopolarimeter for measurements of the coma brightness, and a set of plasma instruments for studies of the solar wind/comet interaction. In view of the high flyby velocity of 68 km/s the experiment active time is very short (only 4 hours) and all data are transmitted back to Earth in real time at a rate of 40 kbps. The Giotto spacecraft is spin-stabilised with a despun high gain parabolic dish antenna inclined at 44.3° to point at the Earth during the encounter while a specially designed dual-sheet bumper shield at the other end protects the spacecraft from being destroyed by hypervelocity dust impacts. The mission will probably end near the point of closest approach to the nucleus when the spacecraft attitude will be severely perturbed by impacting dust particles leading to a loss of the telecommunications link.     

Cometary constraints on the planet forming environment.

Molecular elemental and isotopic abundances of comets provide sensitive diagnostics for models of the primitive solar nebula. New measurements of the N2, NH and NH2 abundances in comets together with the in situ Giotto mass spectrometer and dust analyzer data provide new constraints for models of the comet forming environment in the solar nebula. An inventory of nitrogen-containing species in comet Halley indicates that NH3 and CN are the dominant N carriers observed in the coma gas. The elemental nitrogen abundance in the gas component of the coma is found to be depleted by a factor approximately 75 relative to the solar photosphere. Combined with the Giotto dust analyzer results for the coma dust component, we find for comet Halley Ngas + dust approximately 1/6 the solar value. The measurement of the CN carbon isotope ratio from the bulk coma gas and dust in comet Halley indicates a significantly lower value, 12C/13C = 65 +/- 9 than the solar system value of 89 +/- 2. Because the dominant CN carrier species in comets remains unidentified, it is not yet possible to attribute the low isotope ratio predominantly to the bulk gas or dust components. The large chemical and isotopic inhomogeneities discovered in the Halley dust particles on 1 mu scales are indicative of preserved circumstellar grains which survived processing in the interstellar clouds, and may be related to the presolar silicon carbide, diamond and graphite grains recently discovered in carbonaceous chondrites. Less than 0.1% of the bulk mass in the primitive meteorites studied consists of these cosmically important grains. A larger mass fraction (approximately 5%) of chemically heterogeneous organic grains is found in the nucleus of comet Halley. The isotopic anomalies discovered in the PUMA 1 Giotto data in comet Halley are probably also attributable to preserved circumstellar grains. Thus the extent of grain processing in the interstellar environment is much less than predicted by interstellar grain models, and a significant fraction of comet nuclei (approximately 5%) may be in the form of preserved circumstellar matter. Comet nuclei probably formed in much more benign environments than primitive meteorites.     

Hypervelocity impact on the GIOTTO Halley Mission dust shield: Momentum exchange and measurement

The two layer dust shield on the GIOTTO Halley Mission is constructed in a meteoroid bumper configuration. The dust shield is instrumented so that parameters associated with the hypervelocity collision of cometary particles on the exposed surface can be determined. A multisensor detector array provides simultaneous sensing of the momentum exchange of particles impacting and subsequently penetrating the outer layer of the dust shield. Current knowledge of momentum exchange during hypervelocity impact relative to the GIOTTO Halley Mission and the dust shield experiment is reviewed. The sensors used for determination of momentum exchange exhibit a functional dependence on projectile velocity leading to an enhancement of the sensor signal as the relative impact velocity increases. The GIOTTO Mission provides a very unique opportunity to obtain hypervelocity momentum exchange information at a known impact velocity. Therefore, with the dust experiment, a determination of the velocity index for both momentum and multilayered penetration sensor is possible. Results of analysis of analytical and laboratory studies indicate that the velocity index for hypervelocity impact is approximately 2.0 at the 68 km/sec encounter impact velocity of the GIOTTO Mission. A clear determination of the size and mass distribution of the cometary dust near the comet will be possible from the in-situ measurement of the DIDSY GIOTTO experiment.     

The detection of energetic cometary and solar particles by the EPONA instrument on the Giotto mission

EPONA is an energetic particle detector system incorporating totally depleted silicon surface barrier layer detectors. Active and passive background shielding will be employed and, by applying various techniques, particles of different species, including electrons, protons, alpha particles and pick-up ions of cometary origin may be detected over a wide spectrum of energies extending from the tens of KeV into the MeV range.

The instrument can operate in two modes namely (a) in a cruise phase or storage mode and (b) in a real time mode. During the real time mode, observations at high spatial (octosectoring) and temporal (0.5s) resolution in the cometary environment permit studies to be made of accelerated particles at the bow shock and/or in the tail of the comet. In conjunction with magnetic field measurements on board Giotto, observations of energetic electrons and their anisotropies can determine whether the magnetic field lines in the cometary tail are open or closed. Further, the absorption of low energy solar particles in the cometary atmosphere can be measured and such data would provide an integral value of the pertaining gas and dust distribution. Solar particle background measurements during encounter may also be used to correct the measurements of other spacecraft borne instruments potentially vulnerable to such radiation.

Solar particle flux measurements, obtained during the cruise phase will, when combined with simultaneous observations made by other spacecraft at different heliographic longitudes, provide information concerning solar particle propagation in the corona and in interplanetary space.     

In-situ photopolarimetric measurements of dust and gas in the coma of Halley''s comet

The Halley Optical Probe Experiment (HOPE) on board the Giotto spacecraft has provided the first in-situ measurements, both of the dust and of some gaseous species, from inside the coma of the comet. The instrument has already been described /1/, together with first results /2/. The purpose of this note is to show how optical measurements can lead to in-situ information, how those were obtained during the 13–14 march 1986 Halley fly-by, and what is the status of the data analysis.     

Interpretation of the measurements of secondary electron currents induced by impacts during the flyby of comet Halley

The Giotto, Vega-1 and Vega-2 spacecraft flew through the environment of comet Halley at a relatively close range with velocities of the order of 70–80 km/s. The fore sections of their surface were bombarded by neutral molecules and dust grains which caused the emission of secondary electrons and sputtered ions. This paper makes use of the secondary electron current measurements performed on Vega-1 to infer some characteristic features of the cometary atmosphere. The total gas production rate is estimated to be of the order of 10³⁰ molecules/s and is found to vary with time; the presence of a major jet is also detected at closest approach.     

Cometary atmosphere (gas and dust)

There is important progress now in the identifications and measurements of primary (parent) molecules in the inner coma of Comet Halley. H₂O, CO₂ and CO are definitely in the list, CH and some complicate organic molecules are suspected. Gas production rate for water vapor is Q_H2O 10³⁰ s⁻¹. The bulk of data doesn't contradict to the Whipple model of nucleus (with clathrate modification). Pronounced spatial structure of gaseous flow in the coma was observed, but in general measured properties of neutral gas in the coma of Comet Halley are not very different from predicted. Situation for dust is different. In situ dust measurements show that size spectrum and optical properties of particles in coma are substantively declining from predicted on the base of groundbased photometry. However there are discrepancies between Vega and Giotto dust counter data. Dust in the inner coma didn't prevent the succesful imaging of nucleus by TV on Vega 1 and 2.     

发动机羽流作用下的实时月尘运动仿真

月尘运动是月球探测器软着陆过程中不可或缺的重要环节,针对发动机羽流作用下月尘运动真实感不强和月尘颗粒运动模型过于简单的问题,提出了一种逼真的实时月尘运动仿真方法.通过计算流体动力学(CFD, Computational Fluid Dynamics)和二次谢别德插值(Quadratic Shepard)方法,分析和计算单个月尘颗粒的运动学模型,得到一定初始条件下粒子运动的二维轨迹曲线;通过分析粒子的数量、初始位置、初始速度、生命周期等参数对粒子运动学的影响和变化规律,抽象出月尘系统的粒子集;建立基于月尘粒子集的月尘运动模型.实验结果显示:该运动模型逼真的模拟了发动机羽流作用下月尘腾起、飞溅、弥漫、消散等运动过程,视觉真实感和实时性能良好,对研究真空环境中的月尘运动及月球软着陆等相关领域具有一定的参考意义.目前该方法已应用于北航虚拟现实国家重点实验室月球软着陆仿真系统.     

Interplanetary proton cumulated fluence model update

Solar particle events leading to important increase of particle fluxes at energies of order of magnitude ranging from MeV to GeV constitute an important hazard for space missions. They may lead to effects seen in microelectronics or damage to solar cells and constitute a potential hazard for manned missions. Cumulative damage is commonly expressed as a function of fluence which is defined as the integral of the flux over time. A priori deterministic estimates of the expected fluence cannot be made because over the time scale of a space mission, the fluence can be dominated by the contribution of a few rare and unpredictable high intensity events. Therefore, statistical approaches are required in order to estimate fluences likely to be encountered by a space mission in advance. This paper extends work done by Rosenqvist et al. [Rosenqvist, L., Hilgers, A., Evans, H., Daly, E., Hapgood, M., Stamper, R., Zwickl, R., Bourdarie, S., Boscher, D. Toolkit for updating interplanetary proton-cumulated fluence models. J. Spacecraft Rockets, 42(6), 1077–1090, 2005] to describe an updated predictive engineering model for the proton interplanetary fluence with energies >30 MeV. This model is derived from a complete list of solar proton fluences based on data from a number of calibrated sources covering almost three solar cycles.     

Dust hazard near Halley Comet in case of the VEGA project

The motion of dust particles near Halley Comet is studied and the probability of dust impacts with the spacecraft in case of the VEGA (Venus-Halley)- project is determined. The formation of a crater due to a particle impact with the dust shield is considered and the necessity for using a dual-sheet bumper shield is substantiated. The thickness of a front sheet that plays a role of the particle evaporator is estimated theoretically. The numerical experiment is carried out that simulates the dynamics of collision and evaporation of a particle. Three factors causing perforations of the rear sheet are discussed, i.e. dust penetrated through holes in the front sheet, gas jets and spall fragments of the front-sheet. The consideration of these factors makes it possible to estimate basic parameters of the dual-sheet bumper shield. Flexural vibrations of the front sheet under action of the reverse gaseous jet from the rear sheet are discussed that can affect essentially the shield strength. The perturbing effect of the dust and gas fluxes on the spacecraft is studied.     

An instrument for rapidly measuring plasma distribution functions with high resolution

A new instrument which can rapidly measure plasma particle distribution functions has been developed based upon recent innovations in electrostatic analyzer design and position sensitive particle detection. The new analyzer uses a quadrispherical geometry, but has a completely uniform 360° fan-shaped field of view. The polar angular distribution of entering particles is spatially imaged onto a position sensitive detector at the annular exit aperture after a deflection through 90°. Several methods of position sensitive detection have been successfully used in conjunction with this analyzer. The simplest is individual channel multipliers spaced around the annular exit. Microchannel plate electron multipliers permit greater position resolution to be obtained, and a detector using microchannel plates followed by a resistive anode image converter obtains angular resolution of about one degree -- $\text{i.e.}$, 360 individual angle pixels. Instruments of this type were flown on a sounding rocket in early 1982 and will be included on the Giotto comet mission and the AMPTE ion release module (IRM).     

Comment on estimating the solar proton environment that may affect Mars missions.

Estimates of the energetic proton environment for a Mars mission are generally extrapolated from the solar proton observations at 1 AU. We find that solar particle events may be divided into two general classes. Events dominated by a near-sun injection of particles onto interplanetary magnetic field lines leading to the spacecraft position represent the "classical" solar particle event associated with solar activity. This class of event will scale in radial distance by the classical power law extrapolation. The extended-interplanetary-shock source generates a maximum flux as the shock passes the detection location. This class of event typically generates maximum fluence, but in this case, the flux and fluence will not scale in the classical manner with radial distance.     

Results of dosimetric measurements in space missions.

Detector packages consisting of plastic nuclear track detectors, nuclear emulsions, and theromoluminescence detectors were exposed at different locations inside the space laboratory Spacelab and at the astronauts' body and in different sections of the MIR space station. Total dose, particle fluence rate and linear energy transfer (LET) spectra of heavy ions, number of nuclear disintegrations and fast neutron fluence rates were determined of each exposure. The dose equivalent received by the Payload specialists (PSs) were calculated from the measurements, they range from 190 microSv d-1 to 770 microSv d-1. Finally, a preliminary investigation of results from a particle telescope of two silicon detectors, first used in the last BIORACK mission on STS 76, is reported.     

Dust environment models for comet P/Halley: Support for targeting of the GIOTTO S/C

In March 1985 ESA's GIOTTO spacecraft will fly by P/Halley's nucleus at a distance of a few hundred kilometres. The near nucleus dust environment the probe will traverse poses a hazard with respect to physical damage as well as to attitude disturbance with the possible loss of ground station contact. To predict S/C survivability and dust impact rates for the experiments, a model of the spatial distribution of the dust in the nucleus' vicinity is required. In the ‘dynamic’ model, the local spatial dust density is derived from exact expressions for the dust particle dynamic motion. The model has been implemented in a software system which allows for fast simulations of a cometary fly-by.     

Coma morphology and dust emission pattern of comet Halley

This contribution starts with a short overview on cometary dust modelling and then focuses on the application of coma modelling with respect to in-situ measurements of cometary dust and ground based observations. The fountain model, valid for the dynamics of small cometary dust particles, is discussed. Models using Keplarian theory for the motion of the dust particles are outlined and the ESOC coma model is presented. Some direct applications of this model to analyse the results of the recent spacecraft flybys of comet Halley, as dust flux profiles, particle ground tracks and envelope positions, are shown. To compare the model with ground-based astronomical observations, the utilization of the ESOC coma model for the generation of synthetic images is demonstrated and some future prospects of this technique are outlined.