3R-3URU可展单元机构及其在构架式可展天线中的应用

提出了一种空间单自由度(DOF)可展单元机构3R-3URU。首先,基于螺旋理论和修正的G-K公式分析了RURUR单闭环机构的自由度,建立了该机构中主动关节和被动关节速度之间的解析关系式,基于此关系式和3个RURUR机构共用首尾转动副的结构特点推导了3R-3URU单元机构的自由度,得到了3R-3URU机构具有1个自由度时各运动副的方向和位置满足的几何关系式。其次,将3R-3URU机构应用于3RR-3RRR四面体可展单元及其组成的球面构架式可展天线中,得到了具有收拢和调姿两种自由度的新型可展机构。最后,利用Adams软件对3R-3URU可展单元机构的自由度和其在四面体构架式可展天线中的应用进行了仿真验证。该3R-3URU可展单元机构具有单自由度、铰链种类少、结构简单等优点,可用于曲面构架式可展天线的支撑机构中,实现大折叠比。     

定向通信系统天线波束指向误差分析

对影响定向通信系统天线波束指向误差的因素进行了分析,给出了一种特殊情形下波束指向误差与姿态角的关系式,同时给出了一般情形下基于最小二乘估计的波束指向误差与姿态角关系的推导方法.给出的关系式和方法对分析定向通信系统波束指向误差提供了理论依据,有助于评估定向通信系统的波束对准情况.     

Volterra Series Synthesis of Nonlinear Stochastic Tracking Systems

One of the most important objectives of a radar angle-tracking loop is to keep the target within the beamwidth of the radar antenna. Thus, the behavior of the antenna pointing error is of vital interest in determination of tracking performance. For a tracker with a general polynomial linearity (representing nonlinear receiver characteristics), subjected to constant line-of-sight rate inputs, random initial antenna pointing errors, and white Gaussian receiver noise, a method to obtain approximations to the transient mean and variance of the antenna pointing error as explicit functions of time is presented.     

Application of the Volterra Series to the Analysis and Design of an Angle Track Loop

A typical function of an angle tracking loop is to keep a radar antenna pointed at a target. The error in pointing is directly related to successful operation of the tracking device; therefore, its behavior is of interest. For a tracker with a general polynomial nonlinearity, an arbitrary initial pointing error, and a bounded deterministic input, a method is developed for finding upper bounds on the magnitude of the tracking error using Volterra series techniques. Convergence regions of the Volterra series are also obtained. Applications of these results are made to a second-order tracking device.     

柔性天线面对漂浮基星载天线扰动分析及抑制

 为了研究柔性天线面弹性变形对漂浮基星载天线的扰动,采用固定界面模态综合法和Lagrange方法,通过轴末端与天线面交界面的协调关系,推导了大范围运动的星载天线刚柔耦合动力学模型,其所建立的动力学模型计算效率高并具有足够的精度。分析了柔性天线面弹性变形对星载天线的扰动,利用PD+振动力反馈控制抑制系统振动,并基于Lyapunov方法证明了控制系统的渐近稳定性。仿真结果表明：天线工作过程激起了柔性天线面弹性振动,进而引起星载天线的抖动,严重影响了星载天线的指向精度;利用其控制策略能快速抑制系统振动。结论对天线指向精度的分析与控制具有重要的理论价值及工程实际意义。     

On-orbit calibration of satellite antenna-pointing errors

A pragmatic approach is presented to the on-orbit calibration of the spaceborne gimbaled parabolic reflector antennas to enhance their pointing and tracking accuracies in the presence of unknown structural deformations and other errors. The technique described is based on the second-order extended Kalman filter. Except for some knowledge of Kalman filtering, the work is self-contained and tutorial in character, developing necessary error models and deriving most pertinent equations from first principles. Preliminary simulations, from which covariance analysis results have been obtained, indicate a 66% improvement in the accuracy of the antenna pointing angles     

偏置式Delta并联机构的运动学分析

 具有3 个平移自由度的Delta 并联机构因所有运动副均采用转动铰链而愈来愈引起研究者的重视。偏置量的存在虽降低了加工、制造、装配的难度,但其运动学分析的难度大大增加。本文利用消元法对偏置式Delta 并联机构的正逆运动学进行了深入分析,求出了所有数值解。并采用几何图解法验证了位置正逆解的正确性。在运动学分析过程中引入了矢量分析,使得消元法求解过程十分简便。通过偏置式Delta 并联机构的运动学分析可以证明,某些观点并不准确。     

构架式可展天线机构自由度分析——拆杆等效法

针对四面体构架式可展天线机构的多环耦合特性,提出了一种空间多环耦合机构的自由度分析方法——拆杆等效法。首先拆除四面体基本可展单元机构的耦合约束链,将剩余部分视为一个并联机构,然后应用螺旋理论分析各输出节点的自由度数目及性质,进而构造各输出节点与定节点之间的等效串联运动链,最后复原拆除的耦合约束链得到四面体基本可展单元的等效机构,应用修正的G-K公式计算等效机构的自由度数目,并基于反螺旋理论分析等效机构的自由度性质,从而获得四面体基本可展单元的运动特性。根据四面体基本可展单元的等效机构及其组合方式对最小组合单元及大尺寸构架式可展天线机构的结构进行了化简,并根据其几何特征约束方程推导了最小组合单元及大尺寸构架式可展天线机构的自由度。建立了由27个四面体基本可展单元组成的构架式可展天线机构的仿真模型,对该机构的自由度进行了验证,结果表明提出的拆杆等效法求得的自由度正确,为进一步分析此类天线机构的运动学和动力学奠定了基础,同时为其他类型的空间多环耦合机构的自由度分析提供了一种新的思路。     

机载卫星通信天线引导概率分析

针对某机载Ka频段卫星通信天线的使用环境,论述其天线角跟踪系统在捷联航姿设备引导下,天线主波束指向卫星目标位置的概率,分析影响天线角跟踪系统引导概率的主要因素,通过消减系统中大误差源保证了天线引导概率,通过扩展主波束指向空域提高了目标落入概率。计算数据和试验验证表明,给出的分析方法可行,设计策略有效。     

Type synthesis of deployable mechanisms for ring truss antenna based on constraint-synthesis method

Space deployable antenna is the key equipment in realizing the communication and data transmission between the spacecraft and the earth. In order to enrich the configurations of deployable antennas, the type synthesis of deployable mechanisms for ring truss antenna is conducted in this study. First, the principle of the constraint-synthesis method based on screw theory is briefly described, the structure of the ring truss deployable antenna and its folding principle are analyzed, and the ring truss mechanism is divided into upper edges, lower edges and linkages. Then, based on the constraint-synthesis method, the type synthesis of the basic unit edges is carried out, a series of basic unit mechanisms are obtained from combining the basic unit edge mechanisms, and five mechanism units with fewer joints and simple structures are selected. Furthermore, simulation models of the five ring truss deployable mechanisms are built in Solidworks and Matlab software, and the deploying process is verified by the movement simulation. Finally, mechanism characteristics of the five mechanisms are analyzed and discussed, and a prototype is manufactured, verifying the analysis in this paper. This research provides a new way for the type synthesis of spatial deployable mechanisms, and the ring truss deployable mechanisms obtained in this study can be well applied in the field of aerospace.     

Optimal trajectory design accounting for the stabilization of linear time-varying error dynamics

This study is dedicated to the development of a direct optimal control-based algorithm for trajectory optimization problems that accounts for the closed-loop stability of the trajectory tracking error dynamics already during the optimization. Consequently, the trajectory is designed such that the Linear Time-Varying(LTV) dynamic system, describing the controller’s error dynamics, is stable, while additionally the desired optimality criterion is optimized and all enforced constraints on the traje...     

Experimental study in adaptive tracking control

The authors describe an experimental study of adaptive pointing and tracking control for flexible spacecraft conducted on a complex ground experiment facility. The algorithm used is based on a multivariable direct model reference adaptive control law. Several experimental validation studies performed using this algorithm for vibration damping and robust regulation are extended by addressing the pointing and tracking problem. As is consistent with an adaptive control framework, the plant is assumed to be poorly known to the extent that only system level knowledge of its dynamics is available. Explicit bounds on the steady-state pointing error are derived as functions of the adaptive controller design parameters. It is shown that good tracking performance can be achieved in an experimental setting by adjusting adaptive controller design weightings according to the guidelines indicated by the analytical expressions for the error     

卫星光通信APT控制系统H∞设计

 捕获瞄准跟踪(APT)控制系统的设计是影响整个星间光通信系统性能的重要因素。利用指向偏差的概率分布阐述了卫星光通信过程中捕获概率、跟踪误差及误码率受卫星平台振动和终端装置参数摄动的影响,通过功率谱分析了卫星平台振动在低频段、对象不确定性在高频段对指向偏差的影响,并对其进行了模型化分析。采用H_∞控制混合灵敏度设计方法同时抑制干扰和处理受控对象不确定性问题进行控制器设计。仿真验证表明该方法得到的控制器对平台干扰具有抑制力,对对象摄动具有鲁棒性。     

Deployment dynamic analysis of deployable antennas considering thermal effect

Dynamic analysis of flexible multibody systems is complex. Several successful methods have been demonstrated. However, few works discussed the dynamic performance of the flexible multibody under different temperatures. This paper uses the absolute nodal coordinate formulation to analyze the flexible body dynamics of deployment structures under different temperatures to simulate space environments. The dynamic equations of finite element in temperature field are developed. Then a computer-aided simulation of flexible multibody systems in temperature field is implemented. A general four-bar mechanism under different temperatures as a simulation example is demonstrated, and the deployment characteristics of a special four-bar mechanism as a basic module of the hoop truss deployable antenna is analyzed under different temperatures in order to evaluate the dynamic performance of the deployable antenna in space environments. The simulation results indicate the influence factors of deployment dynamic characteristics include the structural form, material properties, geometric parameters and deployment planning in ambient and thermal/vacuum environments.     

Pointing Error Statistics in Optical Beam Tracking

In tracking optical beams from a source, a pointing error signal is derived from photodetecting the field in the receiver focal plane. This error signal is then used in some manner to control a gimballed system that continually points the receiver optics toward the source. When the source field undergoes turbulent transmission, the optical beam is attenuated and scattered, and the field is randomly defocused at the receiver. In this case the pointing error of the tracking system will evolve as a random vector process in time, statistically related to the random scattering, the photodetection process, and the dynamics of the gimballing system. Such vector processes have probability densities that satisfy well-known differential equations. These equations are derived in terms of accepted scattering models and tracking systems, assuming quadranttype error detectors are used in the focal plane. Approximate solutions are obtained and analyzed for typical operating conditions, and the manner in which the degree of scattering degrades the entire pointing operation is shown.     

Conceptual design,modeling and compliance characterization of a novel 2-DOF rotational pointing mechanism for fast steering mirror

In this paper, a novel 2-DOF rotational pointing mechanism (RPM) is designed inspired by the guidelines of the graphical approach. The mechanism integrates with a fast steering mirror (FSM) for compensating pointing errors of a laser beam. The design intends to achieve an angular travel of ±10 mrad and steers a 25 mm mirror aperture. A planar flexure with beam flexures accompanied in parallel with an axial flexure build-up mechanism configuration. Compliant mechanism-based RPM ensures high precision and compactness. Compliance characteristics are established based on the stiffness matrix method for four different planar flexure layouts. One layout with best in-plane rotational compliance is then assessed for performance sensitivity to mechanism dimension parameters and parasitic error, thus informing the design space. Rotational stiffness in both the in-plane rotational axes and stress is determined based on finite element analysis (FEA). The wire electrical discharge machining (EDM) is employed for developing the proof of concept for the RPM and is then assembled in FSM. Experiments are conducted to determine the rotational stiffness and angular travel about both in-plane rotational axes. Comparison among theoretical, numerical and experiments reveal excellent linearity of rotational stiffness along the rotational travel range. The maximum theoretical error is less than 5.5% compared with FEA while, the experimental error has a mean of 5% and 3% for both rotational axes thus satisfying the intended design requirement.     

深空探测多天线组阵的增益损失研究

为定量分析上行天线组阵增益损失的影响因素,提出一种通过建立数学模型分析合成损耗的估计方法.首先基于天线原理和电磁波传输理论建立了天线组阵上行链路信号的数学模型,以统计学理论对数学模型进行分析,得到了影响上行链路信号的若干因素.通过分析得出,深空探测信号在远距离传输中因大气相位扰动引起的误差是造成天线组阵增益损失的最主要因素.再通过对大气相位扰动误差的进一步分析,构建S频段和X频段下大气相位扰动的空间自相关模型和时间自相关模型,得到组阵基线长度和工作仰角同合成损耗的关系.经过对各误差源的分析可知,在目前的技术水平下,能够满足上行天线组阵工程应用的精度要求.     

Radar Tracking of Low-Altitude Targets

The antenna elevation control signal and the associated staticequilibrium equations are analyzed for the case of tracking of lowaltitude targets for both monopulse and conical-scanning radar. Three possible equilibrium positions of the radar antenna under static operating conditions are ascertained. The static solutions suggest certain dynamic solutions that are likely to arise under practical conditions. The extreme values of the pointing error are shown in graphical form.     

Radar Altimeter Optimization for Geodesy Over the Sea

The optimum processor and its accuracy limit for radar altimetry for geodetic use over the sea are studied with a model accounting for random surface reflectivity, sea height variation, additive noise, and pointing errors, and allowing for arbitrary antenna patterns, signal modulations, and other system parameters. The ?threshold? case solution (which can have any specified accuracy) dictates a signal modulation bandwidth just shy of resolving the sea height variation and/or illuminated sea area (as scaled into time delay and ?smeared? by pointing errors). For such a modulation a relatively complete solution is obtained. These results are used to determine practical radar altimeter designs, additionally accounting for antenna size, stability, and peak power restraints. Conditions allowing neglecting of limiting or complicating effects due to temporally varying reflectivity, sea height, and vehicle position are given and shown to be satisfied for a typical satellite.     

刷式密封温度场数值研究

分析了刷式密封中摩擦生热和热传递的机理,在此基础上将刷丝区域视为各向异性多孔介质、用阻抗力表示刷丝对流体的阻碍作用、以摩擦热为热源建立了计算流体动力学(CFD)模型;得到了刷式密封区域的压力、速度以及温度场分布;并得出了密封区域最高温度和安装过盈量、密封压差的对应关系.结果表明刷丝与转子接触面上存在显著温升,温度场在径向呈阶梯状分布且温度值沿转子外法线方向衰减;密封区域流体对流和出口泄漏流对于温度分布影响较大.计算结果能为刷式密封结构设计、接触副材料选择和密封环安装方式提供参考和指导.