共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
首先分析了现代飞机对飞机综合显示系统的要求,以及飞机显示系统的多任务量对硬实时操作系统的迫切需求.通过对各种实时操作系统性能的分析比较,得到结论:μC/OS-Ⅱ适合作为EFIS系统的应用软件运行平台,即在飞机显示控制主处理器的内核中嵌入实时内核μC/OS-Ⅱ,以及针对飞机飞行姿态显示的重要程度来设置μC/OS-Ⅱ任务优先级的方法.最后,作者介绍了μC/OS-Ⅱ在ARM920T内核中的移植方法,设计了飞行显示画面的消息处理模型及针对如何进一步提高μC/OS-Ⅱ在嵌入式系统的执行效率和实时性的问题方面提出了一种解决方案,从而提高了系统的执行效率及实时性. 相似文献
3.
首先分析了现代飞机对飞机综合显示系统的要求,以及飞机显示系统的多任务量对硬实时操作系统的迫切需求。通过对各种实时操作系统性能的分析比较,得到结论:μC/OS-Ⅱ适合作为EFIS系统的应用软件运行平台,即在飞机显示控制主处理器的内核中嵌入实时内核μC/OS-Ⅱ,以及针对飞机飞行姿态显示的重要程度来设置μC/OS-Ⅱ任务优先级的方法。最后,作者介绍了μC/OS-Ⅱ在ARM920T内核中的移植方法,设计了飞行显示画面的消息处理模型及针对如何进一步提高μC/OS-Ⅱ在嵌入式系统的执行效率和实时性的问题方面提出了一种解决方案,从而提高了系统的执行效率及实时性。 相似文献
4.
推力矢量飞机自适应控制系统仿真平台研究 总被引:1,自引:0,他引:1
研究了具有自修复功能的推力矢量飞机自适应控制系统的结构功能特点,研究了RHO优化控制算法实现在线控制器设计,利用MSLS辨识算法实现在线飞行参数辨识和等价空间算法、传感器信息融合技术和概率统计理论实现FDI算法。并且根据系统各个部分的算法,采用面向对象技术语言VC 6.0和三维图形语言OpenGL开发了仿真平台,利用仿真平台实时演示了飞机存在舵面故障情况下的飞行控制系统运行仿真,解决了飞机飞行过程中存在舵面损伤和气动参数变化的问题,该仿真平台可以根据需求进行飞机故障加载,具备完备的推力矢量飞机自适应控制系统仿真功能。 相似文献
5.
6.
首先分析了现代飞机对飞机综合显示系统的要求,以及飞机显示系统的多任务量对硬实时操作系统的迫切需求。通过对各种实时操作系统性能的分析比较,得到结论:μC/OS-Ⅱ适合作为EFIS系统的应用软件运行平台,即在飞机显示控制主处理器的内核中嵌入实时内核μC/OS-Ⅱ,以及针对飞机飞行姿态显示的重要程度来设置μC/OS-Ⅱ任务优先级的方法。最后,作者介绍了μC/OS-Ⅱ在ARM920T内核中的移植方法,设计了飞行显示画面的消息处理模型及针对如何进一步提高μC/OS-Ⅱ在嵌入式系统的执行效率和实时性的问题方面提出了一种解决方案,从而提高了系统的执行效率及实时性。 相似文献
7.
介绍了飞机蒙皮拉形过程有限元分析软件的前后置处理系统POPPS。该系统的图形处理以三维图形库OpenGL为开发平台,实现了具有良好交互性能的操作,能对模拟数据场进行云图和等值线显示,对蒙皮的成形过程做连续动画模拟显示,并能进行光照渲染处理、任意连续的旋转、平移、缩放和截取以及对图形上的有关节点、单元、等值云区和等值线进行访问。 相似文献
8.
9.
为了在地面实验室开展系统全面的飞机驾驶舱工效学实验,提出了一套完整的人-机-环闭路仿真模拟实验系统方案.综合分析实验系统的设计指标和功能要求,基于相似理论和模块化设计方法,分别对飞机仿真平台的硬件系统和软件系统、环境模拟舱、飞行员生理和心理测量系统开展研究和方案设计.最后搭建出半物理仿真模拟实验平台,实验平台可用于飞行员工作效率的影响机理研究、飞行员工作负荷评估以及仪表显示界面布局设计等. 相似文献
10.
11.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
12.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
13.
14.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
15.
16.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
17.
Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis 总被引:2,自引:0,他引:2
GAO Hong-liang ZHANG Hui WANG Shu-juan 《中国航空学报》2007,20(1):75-80
Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved. 相似文献
18.
19.
Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters 总被引:1,自引:0,他引:1
ZHOU Hong-guo WEI Xiu-ying MAO Chang-hui XIONG Yu-hua QIN Guang-rong 《中国航空学报》2007,20(2):172-176
The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃). 相似文献
20.
YANG Fen ZHANG Xue-jun TIAN Fang WU Xu GAN Fu-xing 《中国航空学报》2007,20(2):181-186
Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration. 相似文献