共查询到20条相似文献,搜索用时 406 毫秒
1.
本文阐述了发动机索赔的概念和发动机索赔涵盖的范围,介绍了各种索赔情况的判定方法和获得索赔信息的各种渠道,论述了完善的管理程序和信息网络化管理的重要性,阐明了数据信息和交流对索赔成功所起的作用,提出了发动机索赔管理的详细方案和建议以及索赔工作岗位的专业化要求,强调了通过索赔降低维修成本的重大意义。 相似文献
2.
在分析了信息融合三级、四级和五级模型优缺点的基础上,提出了信息融合分类的六级功能模型。分析和介绍了每级的含义及特点,并同时给出了该六级功能模型的逻辑处理流程。该模型综合了四级和五级模型的优点,对从检测到威胁判断的整个过程给出了清晰的划分,突出了精细化处理,避免了三级模型和四级模型的不足。 相似文献
3.
介绍了一种网络化条件下能够通用于多种设备的的自动控制系统.该系统采用了蓝牙技术、异构数据库集成技术、瘦终端技术和CORBA技术等无线技术和网络技术,实现了自动控制系统与生产设备无关的特性,具有了传统的自动控制系统所不具有的通用性和超前性.首先介绍了通用自动控制系统设计的大致结构和技术基础;然后介绍了系统的构建和众多优点,最后对系统广阔的应用前景作了展望. 相似文献
4.
介绍了第三代战斗机发动机的设计特点和研制规律;综述了F119和F135等第四代战斗机发动机的研制现状,总结了其性能和结构特点;归纳了战斗机发动机性能、结构和材料的发展趋势;展望了未来战斗机发动机的发展。 相似文献
5.
6.
7.
8.
国际民用航空事业的飞速发展,对航空气象服务提出了越来越高的要求。为了保证飞行安全和提高机场利用率,许多技术先进国家研制和使用了新的航空气象观测、预报和情报传输技术和设备。一些科学发达国家还给主要机场配备了综合自动化气象观测系统、自动化天气预报设施和自动化气象服务系统。他们研制了航空天气情报的自动传输系统,加强了自动制作航线天气预报和短时预报与航站预报的科研工作。由于计算机技术、通信条件和遥感技术的发展,这些国家的航空气象保障能力已经得到了极大的提高。 相似文献
9.
介绍了目前最新ATIMS系统的基本组成和设计原理,详细介绍了各分、子系统工作原理和功用;对陈旧的交通管制和通讯系统所存在的缺陷和不足作了简要概括,概述了空中交通管制系统的发展历史及最新ATIMS系统、AOC、FANS B的发展和展望. 相似文献
10.
主要建立了全机和支柱式起落架缓冲支柱的数值模型,并进行了着陆和滑跑仿真计算。建模主要考虑了缓冲支柱的初始压力、初始容积、油孔面积、活塞面积、缓冲支柱行程等参数。同时给出了飞机在对称着陆和滑跑时的运动学公式,推导了缓冲支柱和轮胎垂直力的计算公式。建立了数值模型并进行着陆和不同跑道的滑跑仿真计算,这对飞机设计和指导起落架试验具有一定工程实用价值。 相似文献
11.
介绍了全光纤化光纤功率计非线性的宽动态范围测量系统,利用该系统可以测量光纤功率计相邻量程的不连续性.文中给出了具体测量数据,并对测量结果进行了不确定度分析. 相似文献
12.
介绍了湍流信道条件下光强闪烁的对数正态分布模型和负指数分布模型,仿真分析比较了两种信道模型条件下无线光通信系统的差错性能。仿真结果表明,平均接收功率相同时,弱湍流条件下,系统的误比特率明显低于强湍流的情况;误比特率为10。时,弱湍流信道闪烁指数为0.25情况下,系统所需的平均接收光功率为-51.5dBm,而强湍流下,系统所需的平均接收光功率为一17.1dBm,比弱湍流下多需34.4dB的平均接收光功率。分析结果表明,弱湍流对数正态分布信道模型和强湍流负指数分布模型不能很好地描述中湍流信道模型,对此有待进一步研究。 相似文献
13.
对机载宽温度环境下光纤网络中雪崩光电二极管(APD)以及APD光接收机的温度性能进行了分析,并且在机载宽温度范围下将APD光接收机与PIN光接收机性能进行了比较,论证了机载宽温度环境下采用APD光接收机的可能性,以此缓解航空机载光纤网络光功率预算困难。 相似文献
14.
15.
16.
Error performance in optical communication, where the information is transmitted by means of the differential pulse-position modulated optical carrier, is discussed. Additive independent background radiation and thermal noise are taken into account. Both threshold type and maximum value type of decision schemes are also considered. The effects of several parameters, such as the number of time slots, the duty ratio, the extinction ratio, the count dimension, the signal-to-background radiation power ratio, and the signal-to-thermal noise power ratio are discussed in detail. The detection characteristic of this system are made clear by comparison with a pulse-position modulation system. 相似文献
17.
18.
19.
Vertical cavity surface emitting lasers offer many features that are suitable for applications in optical interconnect, optical data bus, optical backplane, and optical signal processing. The authors describe basic device structure and fabrication techniques of GaAs-based vertical cavity surface emitting lasers and discuss key laser performance characteristics such as emission wavelength, beam pattern, threshold current, power output, quantum efficiency, and modulation response that are important to these potential applications. Results on monolithic integration of the laser with an n-channel MESFET driver are described 相似文献
20.
Jian-Guo Zhang 《Aerospace and Electronic Systems Magazine, IEEE》1998,13(10):25-32
In this paper, several design issues on highly reliable MIL-STD-1773 (or 1553B) optical fiber avionics data buses are investigated. Two optical modulation techniques are proposed for avionics data buses, and they can be used to efficiently solve the problems associated with the fast identification of correct operation states for optical transmitters while maintaining less complexity of transceivers. The implementation of the proposed techniques is discussed. We also deal with the selection of optical devices and fibers to improve the reliability and power budget of optical fiber avionics data buses. Furthermore, some future improvements on avionics data bus systems are pointed out 相似文献