密集杂波背景下的水下多目标跟踪方法

水下多目标跟踪是水声信号处理领域研究的热点和难点问题。高斯混合概率假设密度（Gaussian mixture probability hypothesis density, GM-PHD）滤波器以其高效的计算效率为解决水下多目标跟踪问题提供了保证。然而，GM-PHD滤波器在跟踪目标时需要先验已知新生目标的强度，否则其性能会出现严重退化。针对该问题，提出一种滑动窗两步初始化高斯混合概率假设密度（sliding window two step initialization GM-PHD, SWTSI-GMPHD）滤波器。将提出的滑动窗两步初始化方法嵌入GM-PHD滤波器，利用滑动窗两步初始化方法估计新生目标强度，减少杂波干扰导致跟踪结果中出现的虚假目标。仿真实验表明，在杂波密集环境下，相较于其他跟踪方法，提出方法将跟踪精度提高69.84%，52.62%和41.05%。     

基于点集合并的修正Hough变换TBD算法

在低信噪比条件下,基于Hough变换的检测前跟踪算法是进行强杂波背景下目标航迹检测的一种手段。本文针对Hough变换后一个目标产生多条可能航迹以及航迹内可能存在杂波点的问题,提出了一种基于能量最大点和点集合并的修正Hough变换检测前跟踪算法。该算法利用量测点时序、能量信息及目标速度先验信息对Hough变换后点迹进行关联和剔除,能够有效的对目标原始航迹进行回溯。针对高斯噪声背景下的飞行目标,仿真结果表明该算法能够对微弱目标进行有效检测,在目标数目、杂波密度、信噪比发生变化的条件下仍能保持较高的检测概率。     

基于量测一致性的分布式多传感器多目标跟踪算法

针对无线传感器网络跟踪多目标过程中传感器能搭载的计算负荷有限,不宜采用复杂算法实现数据处理的问题,提出了一种基于量测一致性的分布式多传感器多目标跟踪算法。算法采用计算相对简易的最近邻域法处理多目标跟踪中的数据互联问题,针对最近邻域法容易受杂波干扰的情况,通过量测的平均一致性迭代来改进算法的性能。仿真结果证明,算法具备有效抑制因误判产生的错误量测对跟踪过程干扰的性能,实现了良好的传感器网络跟踪精度和估计信息一致性。     

残差滤波及其在密集多回波环境下机动多目标跟踪中的应用

 修正概率数据关联滤波（MPDAF）是目前解决密集多回波环境下机动多目标跟踪较为有效的方法,但当回波密度增高时,该方法容易失跟。本文针对此特点,在MPDAF基础上,提出了残差滤波（RF）方法,分别从理论和Monte carlo仿真两方面揭示了RF与数据关联的内在机理,结果表明该方法能大幅度提高跟踪滤波器捕捉目标和剔除关联域内多余回波的能力以及跟踪的性能,是一种解决高密集多回波环境下机动多目标跟踪的有效方法。     

随机集的概率假设密度粒子滤波

多目标跟踪问题中,当目标数已知时,可以用概率数据互联(PDA)或联合概率数据互联(JPDA)算法。而当目标数未知或随时间变化时,需要对不同目标数的跟踪进行比较。可以把目标集看作随机集进行讨论,目标数N是随机变量。随机集的跟踪通过有限集统计(FISST)理论来完成。文中讨论了用粒子滤波实现跟踪随机集的方法。实验表明,在杂波环境下,粒子滤波可以稳健跟踪目标状态和目标数。     

改进的特征匹配雷达视频运动目标跟踪算法

针对密集杂波和复杂多目标情况下,特征匹配跟踪算法定位跟踪精度较低的问题,提出一种改进的特征匹配雷达视频运动目标跟踪算法。首先,从单帧雷达图像检测结果中提取目标的面积、位置、不变矩信息,在运动目标得到判定后,利用卡尔曼滤波的预测位置以及上一帧特征信息进行目标匹配;然后,根据匹配位置和预测位置给出目标估计位置,并进行特征信息更新;最后,输出目标的特征信息、位置信息和运动参数。利用某型导航雷达上采集的实测数据验证了算法的有效性。     

基于CPHD的双层粒子滤波目标跟踪算法

常规基于势概率假设密度滤波(Cardinalized Probability Hypothesis Density,CPHD)的粒子滤波(Particle Fil? ter,PF)跟踪算法应用于多目标跟踪时,容易遇到因粒子数量增加而带来的运算效率下降、目标数目估计不准的问题。文章基于常规粒子滤波 CPHD跟踪算法,通过部署双层粒子,提出基于势概率假设密度滤波的双层粒子滤波 (Two-Layer Particle Filter-CPHD,TLPF-CPHD)算法,以便提高目标数目及状态估计精度。仿真实验结果证明,相比于常规 PF-CPHD算法,新算法具有更好的目标数目和状态估计准确性。     

幅度及多普勒信息辅助的多目标跟踪算法

针对现有的多目标跟踪（MTT）算法在强杂波环境下会出现严重的性能衰退,利用目标的幅度及多普勒特征,基于随机有限集（RFS）理论,提出了一种幅度及多普勒信息辅助的δ广义标签多伯努利（ADI-δ-GLMB）滤波器。首先,利用幅度及多普勒信息对目标状态进行扩展,在此基础上建立了新的量测似然函数。然后,基于δ-GLMB滤波器框架推导了新的更新方程。最后,进行仿真验证,结果表明：强杂波下,ADI-δ-GLMB滤波器跟踪性能明显优于δ-GLMB滤波器,估计精度及稳定性更高,且计算量更低;同信息辅助的概率假设密度（PHD）、多目标多伯努利（MeMBer）滤波器相比,ADI-δ-GLMB滤波器状态估计精度更高。     

基于约束序贯M估计的时空域融合红外杂波抑制

针对红外弱小目标检测中的强背景杂波干扰抑制问题进行研究,提出了一种基于参数约束序贯M估计的时空域融合自适应杂波抑制算法.该算法首先在分析序列图像帧间失配的基础上建立了一种改进的时空域融合背景预测模型,结合二维离散傅里叶快速变换图像配准和双线性插值方法进行灰度值估计;然后,基于约束序贯M估计方法进行模型参数的自适应估计,...     

杂波环境下基于数据压缩的多传感器容积滤波算法

针对杂波环境下非线性系统中多传感器多目标跟踪问题,基于广义多维分配(S-D分配)规则获取最佳的量测划分,通过多传感器数据压缩技术得到等效量测点与等效量测协方差,结合容积卡尔曼滤波原理实现多目标跟踪,提出了一种基于数据压缩的多传感器容积滤波算法(SD-DCCKF)。仿真结果表明:相对已有算法,SDDCCKF不仅避免了因模型线性化误差导致的滤波发散问题,而且克服了算法在高维系统中数值不稳定的缺点,算法估计精度较高,收敛速度较快,能够更加有效地解决非线性系统中的多目标跟踪问题。     

交互多模型PHD滤波跟踪多目标方法

在机动多目标跟踪问题中,目标数未知或随时间而变化,概率假设密度（PHD）滤波可以在每一时间步估计多目标状态和目标数,但单模型方法不能给出精确的估计。提出了一种交互多模型PHD滤波方法,建立多模型描述多目标运动方式,利用PHD滤波结合多模型跟踪目标运动轨迹。同时,给出了多传感器交互多模型PHD滤波方法,以提高目标跟踪精度。     

Tracking in Clutter using IMM-IPDA?Based Algorithms

We describe three single-scan probabilistic data association (PDA) based algorithms for tracking manoeuvering targets in clutter. These algorithms are derived by integrating the interacting multiple model (IMM) estimation algorithm with the PDA approximation. Each IMM model a posteriori state estimate probability density function (pdf) is approximated by a single Gaussian pdf. Each algorithm recursively updates the probability of target existence, in the manner of integrated PDA (IPDA). The probability of target existence is a track quality measure, which can be used for false track discrimination. The first algorithm presented, IMM-IPDA, is a single target tracking algorithm. Two multitarget tracking algorithms are also presented. The IMM-JIPDA algorithm calculates a posteriori probabilities of all measurement to track allocations, in the manner of the joint IPDA (JIPDA). The number of measurement to track allocations grows exponentially with the number of shared measurements and the number of tracks which share the measurements. Therefore, IMM-JIPDA can only be used in situations with a small number of crossing targets and low clutter measurement density. The linear multitarget IMM-IPDA (IMM-LMIPDA) is also a multitarget tracking algorithm, which achieves the multitarget capabilities by integrating linear multitarget (LM) method with IMM-IPDA. When updating one track using the LM method, the other tracks modulate the clutter measurement density and are subsequently ignored. In this fashion, LM achieves multitarget capabilities using the number of operations which are linear in the: number of measurements and the number of tracks, and can be used in complex scenarios, with dense clutter and a large number of targets.     

Diffusion analysis of track loss in clutter

In tracking a target through clutter, the selection of incorrect measurements for track updating causes track divergence and eventual loss of track. The plot-to-track association algorithm is modeled as a Markov process and the tracking error is modeled as a diffusion process in order to study the mechanism of track loss analytically, without recourse to Monte Carlo simulations, for nearest-neighbor association in two space dimensions. The time evolution of the error distribution is examined, and the connection of the approach with diffusion theory is discussed. Explicit results showing the dependence of various performance parameters, such as mean time to lose track and track half-life, on the clutter spatial density are presented. The results indicate the existence of a critical density region in which the tracking performance degrades rapidly with increasing clutter density. An optimal gain adaptation procedure that significantly improves the tracking performance in the critical region is proposed     

Cardinality compensation method based on information-weighted consensus filter using data clustering for multi-target tracking

In this paper, a cardinality compensation method based on Information-weighted Consensus Filter(ICF) using data clustering is proposed in order to accurately estimate the cardinality of the Cardinalized Probability Hypothesis Density(CPHD) filter. Although the joint propagation of the intensity and the cardinality distribution in the CPHD filter process allows for more reliable estimation of the cardinality(target number) than the PHD filter, tracking loss may occur when noise and clutter are high in the measurements in a practical situation. For that reason, the cardinality compensation process is included in the CPHD filter, which is based on information fusion step using estimated cardinality obtained from the CPHD filter and measured cardinality obtained through data clustering. Here, the ICF is used for information fusion. To verify the performance of the proposed method, simulations were carried out and it was confirmed that the tracking performance of the multi-target was improved because the cardinality was estimated more accurately as compared to the existing techniques.     

A method for estimating parameters of K-distributed clutter

A method for estimating the parameters of K-distributed clutter when the available sample size of the data is limited is proposed. In this method, the arithmetic mean and geometric mean of the given data are used to estimate the model parameters. Expressions characterizing the performance of the proposed estimator are presented, along with some simulation results. For spiky clutter, simulations show that parameter estimates obtained from the arithmetic and geometric mean are approximately equal to the numerically evaluated maximum-likelihood (ML) estimates. The method is also used to estimate the parameter of the Weibull density     

基于3DT的空时自适应单脉冲参数估计算法

空时自适应处理(STAP)是机载预警雷达抑制杂波和干扰的一项关键技术,而多普勒三通道联合自适应处理(3DT)是适合工程实现的降维(RD)STAP方法。STAP目标检测后还需进一步估计目标的角度参数,因此将自适应单脉冲(AM)技术引入3DT,提出了一种高精度联合估计目标速度与方位空间角的空时自适应单脉冲算法。理论分析与仿真实验结果表明,当目标多普勒频率偏离检测多普勒单元中心频率时,该算法能同时减少目标多普勒跨越损失和空时导引矢量失配损失,进而提高输出信杂噪比(SCNR),改善目标测角精度。     

Multi-Target Tracking in Clutter without Measurement Assignment

When tracking targets using radars and sonars, the number of targets and the origin of data is uncertain. Data may be false measurements or clutter, or they may be detections from an unknown number of targets whose possible trajectories and detection processes can only be described in a statistical manner. Optimal all-neighbor multi-target tracking (MTT) in clutter enumerates all possible joint measurement-to-track assignments and calculates the a posteriori probabilities of each of these joint assignments. The numerical complexity of this process is combinatorial in the number of tracks and the number of measurements. One of the key differences between most MTT algorithms is the manner in which they reduce the computational complexity of the joint measurement-to-track assignment process. We propose an alternative approach, using a form of soft assignment, that enables us to bypass this step entirely. Specifically, our approach treats possible detections of targets followed by other tracks as additional clutter measurements. It starts by approximating the a~priori probabilities of measurement origin. These probabilities are then used to modify the clutter spatial density at the location of the measurements. A suitable single target tracking (STT) filter then uses the modified clutter intensity for updating the track state. In effect, the STT filter is transformed into an MTT filter with a numerical complexity that is linear in the number of tracks and the number of measurements. Simulations show the effectiveness of this approach in a number of different multi-target scenarios.     

修正的概率数据互联算法

阐明了概率数据互联(PDA)算法能很好地解决密集环境下的目标跟踪问题,在该算法基础上,人们又提出了联合概率数据互联(JPDA)算法和一些基于 PDA 的修正算法。在概率数据互联算法中,有一个很重要的参数就是杂波数密度(或波门内虚假量测期望数)。然而在许多实际情况中,这个参数是很难获取的。针对这一问题,文中提出了一种修正的概率数据互联算法,该算法通过实时地调整这一参数来获得对目标较为准确的估计结果。最后,给出了算法的仿真分析。     

Performance Analysis of the Censored Mean-Level Detector

The censored mean-level detector (CMLD) is an alternative to the mean-level detector that achieves robust detection performance in a multiple-target environment by censoring several of the largest samples of the maximum likelihood estimate of the background noise level. Here we derive exact expressions for the probability of detection of the CMLD in a multiple-target environment when a fixed number of Swerling II targets are present. The primary target is modeled by Swerling case II, and only single-pulse processing is analyzed. Optimization of the CMLD parameters is considered, and a comparison to other detectors is presented.