Observer-based adaptive sliding mode backstepping output-feedback DSC for spin-stabilized canard-controlled projectiles

This article presents a complete nonlinear controller design for a class of spin-stabilized canard-controlled projectiles.Uniformly ultimate boundedness and tracking are achieved,exploiting a heavily coupled,bounded uncertain and highly nonlinear model of longitudinal and lateral dynamics.In order to estimate unmeasurable states,an observer is proposed for an augmented multiple-input-multiple-output(MIMO) nonlinear system with an adaptive sliding mode term against the disturbances.Under the frame of a backstepping design,an adaptive sliding mode output-feedback dynamic surface control(DSC) approach is derived recursively by virtue of the estimated states.The DSC technique is adopted to overcome the problem of ‘‘explosion of complexity" and relieve the stress of the guidance loop.It is proven that all signals of the MIMO closed-loop system,including the observer and controller,are uniformly ultimately bounded,and the tracking errors converge to an arbitrarily small neighborhood of the origin.Simulation results for the observer and controller are provided to illustrate the feasibility and effectiveness of the proposed approach.     

Attitude tracking control for variable structure near space vehicles based on switched nonlinear systems

An adaptive robust attitude tracking control law based on switched nonlinear systems is presented for a variable structure near space vehicle (VSNSV) in the presence of uncertainties and disturbances. The adaptive fuzzy systems are employed for approximating unknown functions in the flight dynamic model and their parameters are updated online. To improve the flight robust performance, robust controllers with adaptive gains are designed to compensate for the approximation errors and thus they have less design conservation. Moreover, a systematic procedure is developed for the synthesis of adaptive fuzzy dynamic surface control (DSC) approach. According to the common Lyapunov function theory, it is proved that all signals of the closed-loop system are uniformly ultimately bounded by the continuous controller. The simulation results demonstrate the effectiveness and robustness of the proposed control scheme.     

Constrained adaptive neural network control of an MIMO aeroelastic system with input nonlinearities

A constrained adaptive neural network control scheme is proposed for a multi-input and multi-output (MIMO) aeroelastic system in the presence of wind gust, system uncertainties, and input nonlinearities consisting of input saturation and dead-zone. In regard to the input nonlinear-ities, the right inverse function block of the dead-zone is added before the input nonlinearities, which simplifies the input nonlinearities into an equivalent input saturation. To deal with the equiv-alent input saturation, an auxiliary error system is designed to compensate for the impact of the input saturation. Meanwhile, uncertainties in pitch stiffness, plunge stiffness, and pitch damping are all considered, and radial basis function neural networks (RBFNNs) are applied to approximate the system uncertainties. In combination with the designed auxiliary error system and the backstep-ping control technique, a constrained adaptive neural network controller is designed, and it is pro-ven that all the signals in the closed-loop system are semi-globally uniformly bounded via the Lyapunov stability analysis method. Finally, extensive digital simulation results demonstrate the effectiveness of the proposed control scheme towards flutter suppression in spite of the integrated effects of wind gust, system uncertainties, and input nonlinearities.     

Adaptive formation control of quadrotor unmanned aerial vehicles with bounded control thrust

In this paper, the flight formation control problem of a group of quadrotor unmanned aerial vehicles (UAVs) with parametric uncertainties and external disturbances is studied. Unit-quaternions are used to represent the attitudes of the quadrotor UAVs. Separating the model into a translational subsystem and a rotational subsystem, an intermediary control input is introduced to track a desired velocity and extract desired orientations. Then considering the internal parametric uncertainties and external disturbances of the quadrotor UAVs, the priori-bounded intermediary adaptive control input is designed for velocity tracking and formation keeping, by which the bounded control thrust and the desired orientation can be extracted. Thereafter, an adaptive con-trol torque input is designed for the rotational subsystem to track the desired orientation. With the proposed control scheme, the desired velocity is tracked and a desired formation shape is built up. Global stability of the closed-loop system is proven via Lyapunov-based stability analysis. Numer-ical simulation results are presented to illustrate the effectiveness of the proposed control scheme.     

Closed-loop dynamic control allocation for aircraft with multiple actuators

A closed-loop control allocation method is proposed for a class of aircraft with multiple actuators. Nonlinear dynamic inversion is used to design the baseline attitude controller and derive the desired moment increment. And a feedback loop for the moment increment produced by the deflections of actuators is added to the angular rate loop, then the error between the desired and actual moment increment is the input of the dynamic control allocation. Subsequently, the stability of the closed-loop dynamic control allocation system is analyzed in detail. Especially, the closedloop system stability is also analyzed in the presence of two types of actuator failures: loss of effectiveness and lock-in-place actuator failures, where a fault detection subsystem to identify the actuator failures is absent. Finally, the proposed method is applied to a canard rotor/wing (CRW) aircraft model in fixed-wing mode, which has multiple actuators for flight control. The nonlinear simulation demonstrates that this method can guarantee the stability and tracking performance whether the actuators are healthy or fail.     

考虑输入饱和的航天器相对运动鲁棒自适应控制

 研究了在输入饱和约束条件下的航天器相对运动的姿态和轨道一体化控制问题。首先,基于单位对偶四元数给出了航天器6自由度相对运动的数学模型,利用误差对偶四元数来描述航天器的相对姿态和相对位置。接着,针对输入饱和问题,提出了一种对航天器模型参数不确定性和外部有界干扰具有较强鲁棒性的自适应控制器,并通过李雅普诺夫方法从理论上严格证明了整个闭环系统的全局渐近稳定性。最后,通过数值仿真来验证设计方法的有效性和可行性,并且与其他方法进行了比较,结果表明设计的方法能够抑制输入饱和的问题,在性能上具有更快的收敛速度和更强的鲁棒性。     

Event-triggered adaptive control for attitude tracking of spacecraft

Plug-and-play technology is an important direction for future development of spacecraft and how to design controllers with less communication burden and satisfactory performance is of great importance for plug-and-play spacecraft. Considering attitude tracking of such spacecraft with unknown inertial parameters and unknown disturbances, an event-triggered adaptive backstepping controller is designed in this paper. Particularly, a switching threshold strategy is employed to design the event-triggering mechanism. By introducing a new linear time-varying model, a smooth function, an integrable auxiliary signal and a bound estimation approach, the impacts of the network-induced error and the disturbances are effectively compensated for and Zeno phenomenon is successfully avoided. It is shown that all signals of the closed-loop system are globally uniformly bounded and both the attitude tracking error and the angular velocity tracking error converge to zero. Compared with conventional control schemes, the proposed scheme significantly reduces the communication burden while providing stable and accurate response for attitude maneuvers. Simulation results are presented to illustrate the effectiveness of the proposed scheme.     

空天飞行器直接力/气动力复合容错控制

考虑发生发动机推力损失故障的空天飞行器，针对直接力、气动力复合容错控制问题，设计一种基于自适应滑模的容错控制策略。首先，对于发生推力损失故障的摆动发动机，考虑X型安装的实际特点，对线性化后的俯仰通道控制模型进行故障等效，并采用自适应的方法对故障及干扰信息进行估计，综合利用舵面与发动机摆动角进行容错控制器设计。其次，考虑纵向容错控制对飞行器横侧向稳定性的影响，基于自适应反步的方法，利用方向舵与组合工作的左、右升降舵抵消干扰力矩的影响，保证横侧向的稳定。最后，基于李雅普诺夫稳定性理论，对所采用方法进行了分析，并通过仿真结果验证了所设计的复合容错控制方案的有效性。     

SE(3)上航天器姿轨耦合固定时间容错控制

针对相对运动航天器姿轨一体化控制问题,考虑执行器故障和控制输入饱和的影响,提出了一种基于滑模的模糊自适应固定时间容错控制方法。首先,在李群SE（3）的框架下建立并推导相对运动航天器姿轨一体化误差动力学模型;其次,引入执行器故障和控制输入饱和的问题,采用双幂次快速终端滑模面,并结合模糊自适应方法设计了固定时间稳定的容错控制器,可以实现执行器故障情况下相对运动航天器的高精度快速跟踪控制;然后,运用Lyapunov方法证明了系统的稳定性,该控制器不仅能不依赖于系统的初始状态实现滑模趋近和到达阶段的固定时间稳定性,而且由于采用模糊逼近方法结合自适应更新策略可以实时高精度地估计系统的总扰动信息,因此可以达到快速高精度的容错控制目标;最后,对所提出的的控制方法进行数值仿真分析,结果验证了该方法的有效性和可行性。     

Robust adaptive compensation control for unmanned autonomous helicopter with input saturation and actuator faults

This paper studies a robust adaptive compensation Fault Tolerant Control(FTC) for the medium-scale Unmanned Autonomous Helicopter(UAH) in the presence of external disturbances,actuator faults and input saturation.To improve the disturbance rejection capacity of the UAH system in actuator healthy case, an adaptive control method is adopted to cope with the external disturbances and a nominal controller is proposed to stabilize the system.Meanwhile, compensation control inputs are designed to reduce the negative effects derived from actuator faults and input saturation.Based on the backstepping control and inner-outer loop control technologies, a robust adaptive FTC scheme is developed to guarantee the tracking errors convergence.Under the presented FTC controller, the uniform ultimate boundedness of all closed-loop signals is ensured via Lyapunov stability analysis.Simulation results demonstrate the effectiveness of the proposed control algorithm.     

Integrated active fault-tolerant control using IMM approach

An integrated fault detection, diagnosis, and reconfigurable control scheme based on interacting multiple model (IMM) approach is proposed. Fault detection and diagnosis (FDD) is carried out using an IMM estimator. An eigenstructure assignment (EA) technique is used for reconfigurable feedback control law design. To achieve steady-state tracking, reconfigurable feedforward controllers are also synthesized using input weighting approach. The developed scheme can deal with not only actuator and sensor faults, but also failures in, system components. To achieve fast and reliable fault detection, diagnosis, and controller reconfiguration, new fault diagnosis and controller reconfiguration mechanisms have been developed by a suitable combination of the information provided by the mode probabilities from the IMM algorithm and an index related to the closed-loop system performance. The proposed approach is evaluated using an aircraft example, and excellent results have been obtained     

Robust reliable control for autonomous spacecraft rendezvous with limited-thrust

This paper investigates the problem of robust reliable control for the spacecraft rendezvous with limited-thrust. Based on the Clohessy–Wiltshire (C–W) equations and by considering the uncertainties and the possible failures, the dynamic model for spacecraft rendezvous is proposed, and the orbital transfer control problem is transformed into a stabilization problem. Then, by a Lyapunov approach, the existence conditions for admissible controllers are formulated in the form of linear matrix inequalities (LMIs), and the controller design is cast into a convex feasibility problem subject to LMI constraints. With the obtained controllers, the rendezvous can be accomplished with the limited-thrust in spite of the possible thruster failures. The effectiveness of the proposed approach is illustrated by simulation examples.     

An LMI-based decoupling control for electromagnetic formation flight

Electromagnetic formation flight(EMFF) leverages electromagnetic force to control the relative position of satellites. EMFF offers a promising alternative to traditional propellant-based spacecraft flight formation. This novel strategy is very attractive since it does not consume fuel. Due to the highly coupled nonlinearity of electromagnetic force, it is difficult to individually design a controller for one satellite without considering others, which poses challenges to communications.This paper is devoted to decoupling control of EMFF, including regulations, constraints and controller design. A learning-based adaptive sliding mode decoupling controller is analyzed to illustrate the problem of existing results, and input rate saturation is introduced to guarantee the validity of frequency division technique. Through transformation, the imposed input rate saturation is converted to state and input constraints. A linear matrix inequalities(LMI)-based robust optimal control method can then be used and improved to solve the transformed problem. Simulation results are presented to demonstrate the effectiveness of the proposed decoupling control.     

Adaptive control for a sensorless permanent-magnet synchronousmotor drive

An adaptive velocity controller for a permanent-magnet synchronous motor without using shaft sensor is presented. Two line-to-line voltages and two stator currents are sensed to produce the flux position. The design part is concerned with the formulation of control algorithm for current-regulated pulsewidth modulated inverter and vector control strategy for speed loop. Under the vector control framework, self-tuning, model following, and model referencing adaptive control are applied to design for the speed-loop controllers. The implementational part integrates the control of current and speed loop using microprocessor-based controllers. Experimental case studies that correlate simulation and measurement results are provided. The experimental results validate the theoretical development. A new approach for designing advanced adaptive controller for a sensorless ac drive is provided     

考虑输入饱和的固定翼无人机自适应增益滑模控制

针对复杂环境下的固定翼无人机飞行控制问题，考虑输入饱和以及复杂外界干扰的影响，提出一种基于自适应滑模控制方法的固定翼无人机飞行控制策略。首先，对固定翼无人机模型进行介绍，将模型分为姿态子系统和速度子系统；其次，针对姿态子系统和速度子系统的特点以及控制需求，分别采用自适应多变量螺旋滑模和自适应快速超螺旋滑模设计姿态控制器和速度控制器，该策略无需设计干扰观测器对外界干扰进行估计，仍然可以实现固定翼无人机对姿态参考指令和速度参考指令的有限时间精确跟踪，并基于Lyapunov的稳定性分析方法证明了闭环系统的稳定性。最后，对本文所提出的控制策略进行了仿真验证，结果表明该控制策略具有良好的控制性能。     

Model reference adaptive control with smooth switching scheme for piecewise linear systems and its application in turbofan engine control

A model reference adaptive control (MRAC) with smooth switching scheme was proposed for piecewise linear systems, and the method was utilized in turbofan engine control to avoid the discontinuity of control input. In this scheme, each sub-region of the operating envelope had its own MRAC controller, and smooth indicator function based smooth switching scheme was introduced to switch multiple controllers smoothly at the boundary of adjacent sub-regions. The Lyapunov stability analysis indicated that the proposed smooth switching scheme can guarantee the convergence of the closed-loop system during the controllers switching. The tracking error system was converted into a switched system to analyze the global stability of the closed-loop system. The advantage of the method was that the chattering of system output and instability caused by asynchronous switching can be eliminated. The simulation illustrates the effectiveness of the proposed control scheme in comparison with the existing MRAC controller with gain scheduling for turbofan engine.      

高超声速飞行器自适应神经网络容错控制

针对高超声速飞行器巡航段执行器控制效益损失故障和卡死故障问题,基于高超声速飞行器纵向运动模型,将自适应算法与改进的径向基函数神经网络(RBFNN)方法相结合,设计了一种自适应神经网络容错控制器。所提出的容错控制方法具有无需估计执行器故障值的优点,且设计的控制算法结构简单,无需大量实时计算,可以快速处理故障的发生,确保系统在参数不确定、恒定或时变执行器故障与卡死故障情况下仍具有稳定跟踪能力。最后,仿真验证了该方法的有效性。     

有输入未建模动态的导弹鲁棒控制器设计

在导弹系统俯仰通道中存在输入未建模动态情况下，提出了一种基于RBF神经网络和反演控制技术的非线性鲁棒控制器的设计方法。首先应用两个RBF神经网络对输入未建模动态设计了神经网络逆补偿器．然后利用反演控制技术设计了导弹非线性控制器．最后应用Lyapunov稳定性理论推导出RBF神经网络权重矢量调节律，证明了系统的所有信号均有界且全局指数收敛至原点。最后给出的BTT导弹非线性六自由度数字仿真结果显示了该设计方法的有效性。     

航天器有限时间自适应姿态跟踪容错控制

非刚体航天器存在时变的惯量、执行器完全失效或衰退故障以及外界干扰的情况,提出一种有限时间自适应姿态跟踪容错控制方法。首先,基于有限时间理论和自适应方法,设计惯量不确定性自适应估计项和外界干扰参数自适应估计项进行系统补偿,克服惯量不确定性和抑制外界干扰;然后,基于容错控制和双幂次方法,设计一种自适应有限时间姿态跟踪容错控制算法,并且利用Lyapunov稳定性理论证明所提算法能够保证航天器姿态跟踪系统实际有限时间稳定;最后,对仿真结果进行验证。结果表明:所提有限时间姿态跟踪容错控制方法是有效的。     

Online identification and control of linearized aircraft dynamics

An approach for online identification and control that requires weaker excitation than the existing approaches based on least-squares schemes and closed-loop systems is examined. It uses multiple-objective optimization theory to resolve the conflict between identification and controller performance as they compete for the only available resource, the inputs to the aircraft. The approach is applied to a longitudinal model of a representative linearized high-performance aircraft model. Simulation results compare the final controller with a conventional gain-scheduled pitch command augmentation system. It is demonstrated that by allowing some control input to be given to the identification process, the controller's overall performance is improved