Compound Control for Hydraulic Flight Motion Simulator

The design of a compound control is presented for the servo system of hydraulic flight motion simulator, which suffers from highly nonlinear dynamics, large parameter time-variation and severe load coupling among channels. The compound control is composed of a robust feedback controller and a feedforward compensator. The design aim is to achieve high tracking performance even in the presence of considerable uncertainty, external disturbance and load coupling among channels. Toward this aim the feedback controller for rejecting perturbation and disturbance is designed by using μ synthesis optimization technique and the feedforward compensator for compensating time lag of dynamic system is established based on the basic idea of zero phase error tracking. To validate the proposed control strategy, simulations and experiments are implemented, and show that the resulting system is highly robust against model perturbation and possesses excellent capability of suppressing the load coupling and improving the tracking performance.     

高精度激光跟踪系统的综合设计

1.前言 激光跟踪系统是航空航天工程中的重要设备之一。要想建造高精度激光跟踪系统,除了提高有关部件的精度之外,系统的综合设计是一个关键步骤。对于这类系统的综合设计,目前都采用全连续或全离散控制方案,而且不考虑对象未建模动态和子系统间的耦合问题。     

Canonical transform for tracking with kinematic models

A canonical transform is presented that converts a coupled or uncoupled kinematic model for target tracking into a decoupled dimensionless canonical form. The coupling is due to non-zero off-diagonal terms in the covariance matrices of the process noise and/or the measurement noise, which can be used to model the coupling of motion and/or measurement between coordinates. The decoupled dimensionless canonical form is obtained by simultaneously diagonalizing the noise covariance matrices, followed by a spatial-temporal normalization procedure. This canonical form is independent of the physical specifications of an actual system. Each subsystem corresponding to a canonical coordinate is characterized by its process noise standard deviation, called the maneuver index as a generalization of the tracking index for target tracking, which characterizes completely the performance of a steady-state Kalman filter. A number of applications of this canonical form are discussed. The usefulness of the canonical transform is illustrated via an example of performance analysis of maneuvering target tracking in an air traffic control (ATC) system.     

液压Stewart平台基于工作空间综合偏差的同步控制

 为了抑制轨迹跟踪过程中各自由度运动之间的相互干扰,将平台跟踪的轨迹进行泰勒级数展开,提出基于工作空间含有各向自由度运动自身跟踪偏差和各自由度运动之间耦合干扰偏差的综合轨迹跟踪偏差量的表达式。根据工作空间综合偏差量反馈,利用反步法设计鲁棒控制器,使各向自由度运动自身跟踪偏差与之间的耦合偏差同时稳定地趋于零,以限制跟踪过程中各自由度运动之间耦合干扰。同时,考虑到实际平台惯性参数不确定性,推导得出惯性参数自适应律,以提高系统的跟踪精度。利用AMESim与MATLAB进行联合仿真验证,结果表明:与传统的比例 积分 微分（PID）控制器相比,该方法在保证各自由度运动自身跟踪偏差稳定收敛的同时有效地降低了各自由度运动之间的耦合干扰偏差,更有效地提高了平台的跟踪性能。     

基于鉴相器的矢量跟踪环设计

基于鉴相器的矢量跟踪环是锁定导航卫星码和载波的一种跟踪算法,这种算法适合于在弱信号环境下进行跟踪。矢量环不仅充分利用信号跟踪和导航状态解算之间的内在耦合关系,而且每一通道中采用鉴相器和锁频环结合的方式,系统一步内完成信号跟踪和导航解算任务。反馈控制量NCO是由导航滤波器和环路内部滤波器共同产生。实验表明,矢量跟踪环具有快速重捕获特性,能够在弱信号的环境下运行,比起传统环路有更小的跟踪误差。     

制导飞行含人工跟踪的飞行力学分析

以工程应用为背景，研究了含人工跟踪的制导飞行动力学问题，首先，给出了经过技术培训的行为物理模型。接着详细分析了人工跟踪回路的稳定性和跟随性，同时提供了一种改善人工回路特性的方法。最后，对含人跟踪回路的飞行器闭环回路的人工跟踪误差特性进行分分析和仿真计算。仿真结果证明该研究方案是可行的，研究结果已被国内有关部门在工程上采用。     

K-Band Tracking System for Domestic Satellite Communication System

System design and operational results of a tracking system for a K-band Earth station antenna with a diameter of 11.5 m are discussed. Monopulse tracking technique using higher order waveguide modes is utilized. An investigation was conducted to clarify the rainfall effect and the effect of oscillator phase noise on the tracking receiver. An autotrack system is to be manufactured on the basis of these studies. Experiments were performed using the medium capacity communications satellite. No cross coupling was seen in the pull-in patterns. Sufficiently good results were obtained in tracking accuracy: less than 0.005° (peak value) under normal conditions, and less than 0.01° under an average wind velocity of more than 20 m/s.     

一种应用于混合H2/H∞飞行跟踪控制的扩展LMI方法（英文）

Lyapunov变量和系统矩阵之间的耦合导致混合H2/H∞飞行跟踪控制器设计问题非凸。借助于扩展LMI方法,非凸优化问题被转化为凸的线性矩阵不等式(LMI)表达式。通过引入松弛变量,上述的耦合得以消除。而且,一个充要条件被证明成立以求解混合H2/H∞飞行跟踪控制器,该控制器不仅能够稳定被控系统,并且能够保证系统在正常和故障情况下均满足混合H2/H∞性能指标。这种新的扩展LMI表达式提供了额外的自由度去求解非凸优化问题,并减小了控制器设计的保守性。关于ADMIRE模型的仿真结果说明这种扩展LMI方法的优越性。     

Analytical Results for the x, y Kalman Tracking Filter

A two-dimensional x, y Kalman tracking filter is analyzed for a track-while-scan (TWS) operation when the radar sensor measures range and bearing (r, ?) at uniform sampling intervals T seconds apart. This development explicitly considers the coupling between the quantities measured by the sensor (r, ?) and the Cartesian x, y coordinate system selected for the tracking operation. The steadystate components of the gain and error covariance matrixes are analytically determined under the assumption of a white noise maneuver acceleration model in two dimensions. These results are verified by computer calculation of the Kalman filter matrix equations.     

半捷联位标器稳定跟踪与弹体姿态一体化控制

半捷联位标器安装在弹体上,由于寄生回路的存在,使得位标器稳定跟踪控制回路和弹体姿态控制回路产生严重耦合,影响了位标器的稳定与跟踪。针对半捷联导引头稳定平台的稳定与跟踪问题,提出了一种半捷联位标器稳定跟踪控制与弹体姿态控制的一体化方法。基于反步控制原理设计了控制律,通过合理选择反馈增益可保证系统的稳定性与动态性能。最后对一体化设计与传统分离设计进行了仿真对比。仿真结果表明：考虑位标器稳定跟踪回路与导弹姿态回路耦合的一体化控制器,不仅能够保证弹体姿态控制系统快速响应,还可以提高位标器的稳定跟踪性能,并降低位标器跟踪不上高速目标的可能性。     

基于RBF网络辨识的涡扇发动机双变量神经网络PID解耦控制

根据神经网络与PID算法相结合的思想, 针对涡扇发动机双变量控制中变量之间的耦合问题, 提出基于径向基函数神经网络(RBF)辨识的发动机双变量神经网络PID解耦控制, 并给出控制系统的控制结构及原理.仿真结果表明, 该方法控制精度高、跟踪性能强、鲁棒性良好, 能够有效地减小各回路之间的耦合影响, 并保证控制系统具有良好的稳态和动态性能, 适合航空发动机控制.      

Motion synchronization in a dual redundant HA/EHA system by using a hybrid integrated intelligent control design

This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance.     

弹性飞翼无人机鲁棒姿态控制设计

针对大展弦比飞翼布局无人机的刚体运动与弹性运动耦合动力学模型,提出了一种基于反步法的鲁棒非线性控制方法。该方法考虑了飞翼无人机的非线性因素,将动态面反步控制作为内环控制抵消系统的非线性因素;同时考虑系统实际存在的弹性耦合项、参数不确定项以及外部扰动,将内环反步控制与飞翼无人机模型整体作为新的被控对象,引入最优化理论对新的被控对象设计了外环鲁棒控制器。仿真结果表明,所提出的控制器不仅满足飞翼无人机姿态跟踪性能的要求,且对模型不确定性和气动弹性影响具有鲁棒性。     

Lock threshold deterioration induced by antenna vibration and signal coupling effects in hypersonic vehicle carrier tracking system of Ka band

The envelope of a hypersonic vehicle is affected by severe fluctuating pressure, which causes the airborne antenna to vibrate slightly. This vibration mixes with the transmitted signals and thus introduces additional multiplicative phase noise. Antenna vibration and signal coupling effects as well as their influence on the lock threshold of the hypersonic vehicle carrier tracking system of the Ka band are investigated in this study. A vibration model is initially established to obtain phase noise in consideration of the inherent relationship between vibration displacement and electromagnetic wavelength. An analytical model of the Phase-Locked Loop(PLL), which is widely used in carrier tracking systems, is established. The coupling effects on carrier tracking performance are investigated and quantitatively analyzed by imposing the multiplicative phase noise on the PLL model. Simulation results show that the phase noise presents a Gaussian distribution and is similar to vibration displacement variation. A large standard deviation in vibration displacement exerts a significant effect on the lock threshold. A critical standard deviation is observed in the PLL of Binary Phase Shift Keying(BPSK) and Quadrature Phase Shift Keying(QPSK) signals. The effect on QPSK signals is more severe than that on BPSK signals. The maximum tolerable standard deviations normalized by the wavelength of the carrier are 0.04 and 0.02 for BPSK and QPSK signals,respectively. With these critical standard deviations, lock thresholds are increased from à12 andà4 d B to 3 and à2 d B, respectively.     

基于隐模型跟踪的倾转旋翼机飞行控制

针对倾转旋翼机过渡阶段的强耦合性和快时变性,基于隐模型跟踪法设计了过渡阶段的自主飞行控制律。首先,考虑短舱和旋翼相对机身运动带来的额外惯性力,建立了倾转旋翼机的多体动力学模型;然后,通过飞行动力学特性分析发现倾转旋翼机过渡阶段具有强耦合性和快时变性;最后,针对强耦合性使用隐模型跟踪法实现了固定倾转角时的解耦控制,针对快时变性使用插值调用控制参数的方法实现了倾转旋翼机在整个过渡阶段的连续控制。仿真结果表明,隐模型跟踪控制系统能够达到良好的速度和轨迹跟踪效果,可以实现倾转旋翼机在过渡阶段的自主飞行仿真。     

无速度反馈的航天器姿轨耦合跟踪控制

提出了一种无速度反馈的航天器姿轨耦合跟踪控制算法。首先建立起基于对偶四元数的带扰动和参数不确定性的航天器姿轨耦合动力学模型。然后基于浸入与不变流形理论设计了速度观测器,通过增益注入对非线性项抑制,从而同时估计角速度和线速度。利用李雅普诺夫函数分析了观测器状态量的收敛性以及注入增益的有界性,证明了该观测器的指数稳定性。最后设计了一个比例-微分（PD）位置与姿态跟踪控制器,该控制器可以实现航天器的任意姿态与位置跟踪,分析了这种观测-控制结构的闭环系统渐近稳定性。仿真验证了该速度观测器和控制器的有效性以及对于参数不确定性和测量噪声具有较好的鲁棒性。     

High-resolution simulation for rotorcraft aerodynamics in hovering and vertical descending flight using a hybrid method

A high-resolution simulation tool for rotorcraft aerodynamics is developed by coupling CFD with a Vorticity Transport Model (VTM). An Eulerian-based CFD module is used to model the blade near body flowfield, and a Lagrangian-based VTM module is employed for vortex tracking in the far wake. The coupling procedure is implemented by transmitting vortex sources to the VTM module and feeding boundary conditions back to the CFD module. The presented CFD/VTM hybrid solver is firstly validated by hover cases of three different rotor configurations. Simulation results, including the blade surface pressure distribution, rotor downwash, and hover figure of merit, exhibit favorable correlations with available experimental data. Then, a rotor operated in vertical descending flight with a fixed collective pitch is investigated. It is shown that the CFD/VTM coupling method is suitable for rotor wake simulation. Wake instabilities (far wake breakdown in hover and toroidal wake pattern in the vortex ring state) are successfully demonstrated with a moderate computational cost.     

基于LQG/LTR的高超声速飞行器全通道姿态控制

针对高超声速飞行器具有强烈的非线性、耦合及不确定性等特点,且存在系统噪声和量测噪声,使姿态控制变得困难的问题,提出了采用LQG/LTR控制方法进行全通道姿态控制的思路。首先,在平衡点通过小偏差线性化方法建立多变量耦合的控制模型;然后,运用LQG/LTR控制方法设计姿态控制器。仿真结果表明,在有高斯噪声情况下,所设计的姿态控制系统实现了指令精确跟踪,具有较强的鲁棒性。     

高超声速飞行器有限时间耦合模糊控制

针对高超声速飞行器的角度与角速度子系统间的耦合控制问题，提出了一种基于耦合特性评价的有限时间模糊控制方案。首先，针对高超声速飞行器的动力学模型，并且考虑到与工程实际相结合，将舵系统引入到动力学模型中，建立了相对完善的动力学模型，通过引入期望指令，建立了面向控制的动力学误差模型。其次，在控制律设计上采用终端滑模设计了有限时间控制器，同时在耦合评价的基础上，为了解决系统对耦合的适应性以及耦合的抖振问题采用了模糊控制方法，并借助于干扰观测器解决外部干扰问题。采用李雅普诺夫稳定性理论证明了所设计的控制律是有限时间稳定性的。在数字仿真过程中，充分考虑了舵系统特性、气动拉偏、控制输入抖动等因素，仿真结果表明该方法是有效的。     

喷嘴为执行机构的空间飞行器基于误差四元数的非线性姿态跟踪控制

研究带喷嘴空间飞行器在姿态跟踪机动时的多轴耦合非线性姿态控制问题。姿态运动学和动力学用误差四元数描述。通过线性变换将误差四元数动力学方程转换成 4个摄动双积分系统 ,并基于此摄动双积分系统设计了开关控制器。由误差四元数及其导数构成的抛物型开关函数决定了控制器中的逻辑。文章考虑了最短的姿态捕获路径、外部干扰抑制、和不确定参数补偿问题。控制器允许力矩矩阵为非对称 ,从而使喷气执行机构的安装有更好的灵活性。由于不需要目标的加速度反馈 ,控制器可用于对机动目标的跟踪。用相平面方法分析了闭环系统的鲁棒稳定性。仿真结果验证了控制方案的可行性