虚拟仿真环境中的航路冲突调配规则研究

现行仿真工具在模拟管制员航路冲突调配上存在问题边界不一致、调配方案不适用等诸多问题。针对这种现状，根据航路飞行冲突的影响因素对航路冲突进行了详细分类，并基于决策树建立了航路冲突调配方案。以决策树为基础，使用VB工具进行系统开发，建立快速仿真工具。模拟运行表明，仿真工具可模拟管制员提供简易可行的航路冲突调配方案，驱动仿真系统的运行。     

虚拟仿真环境中的航路冲突调配研究

现行仿真工具在模拟管制员航路冲突调配上存在问题边界不一致、调配方案不适用等诸多问题。针对这种现状,根据航路飞行冲突的影响因素对航路冲突进行了详细分类,并建立了航路冲突调配方案。使用VB和SQL混合编程进行系统开发,建立快速仿真工具。模拟运行表明,工具可模拟管制员提供简易可行的航路冲突调配方案,驱动仿真系统的运行。     

基于液晶光阀的动态红外场景仿真研究

介绍了基于液晶光阀的动态红外场景仿真系统构成,分析了液晶光阀的波长变换和空间调制机理。对反映红外场景仿真效果主要因素(光谱输出特性、时间响应特性和空间分辨力)进行了理论分析和研究。利用优化设计液晶光阀参数构建的动态红外场景仿真样机,测量其光谱输出特性、时间响应特性和空间分辨力,结果表明,仿真系统的输出光谱可覆盖中波和长波红外波段,可实现帧频70Hz,系统空间分辨力优于10 lp/mm(受红外光学系统和红外热像仪分辨力限制)。     

Monopulse Resolution of Interferometric Ambiguities

Ambiguities in interferometers with high angular accuracy must be resolved to achieve a practical system design. A new technique for ambiguity resolution is described and is based on monopulse circuitry used with the interferometric elements. The overall angular accuracy of the system is achieved by the interferometer; the angular accuracy of the monopulse subsystem is used to resolve interferometric ambiguities. An expression for the probability of correct ambiguity resolution is derived as a function of element size and monopulse accuracy which indicates that high probability of ambiguity resolution results when the size of the interferometric elements are a fraction of the interferometric baseline. Finally, a comparison between conventional monopulse and interferometric system designs is made for the three principal parameters, signal sensitivity, angular accuracy, and field of view, that dictate the appropriate choice for a particular application. Interferometric systems are more appropriate than monopulse systems for those applications in which angular accuracy and field of view are more important than signal sensitivity.     

用图像处理技术对航空相机镜头分辨力的测量

介绍了一种以线阵CCD固态传感器取代读数显微镜，能自动测量和实时显示结果的航空相机镜头分辨力测量系统，论述了系统的工作原理、设计及该系统的测量误差。     

数字射线成像空间分辨率的增强

成像空间分辨率是工业数字射线成像系统的重要技术指标,通过分析成像的物理过程,给出了成像过程的数学模型,进而得出影响数字射线成像空间分辨率的主要因素,并针对各种因素研究了相应的提高空间分辨率的方法.建立了成像系统的点扩展函数模型,给出了优化投影放大比的方法,提出了一种提高探测器采样频率和光电管采样孔径的硬件方法;采用了一种简便的方法抑制了散射对空间分辨率的影响;计算机模拟及实验结果验证了方法的有效性.     

CCRS C/X-airborne synthetic aperture radar: An Rand D tool for the ERS-1 time frame

The airborne synthetic-aperture radar (SAR) system developed for the Canada Centre for Remote Sensing (CCRS) is described. It consists of two radars, at C-band and X-band. Each radar incorporates the following features: dual-channel receivers and dual-polarized antennas; a high quality, 7-look, real-time processor; a sensitivity time control for range-dependent gain control; a motion-compensation system for antenna steering in azimuth and elevation; and baseband I and Q signal phase rotation. The system also uses a high-power transmitter with a low-power back-up. The SAR maps to either side of the aircraft, at high or low resolution, at incidence angles which in high resolution span 0° to 80°. Radar operating parameters, data products, key specifications and the motion compensation scheme used are presented. Properties of the real-time imagery are discussed and examples of C-band SAR data in the three operating modes are given     

嵌入式软件测试研究

简要介绍了软件测试的基本概念和理论;阐述了软件测试在产品研发过程中的地位与作用;结合嵌入式系统开发的经验和从事软件测试的体会,探讨了软件测试的策略以及如何进行软件测试的设计,并提出了针对我国企业软件测试现状的软件测试解决方案。     

一个超冗余度移动操作臂机器人系统的实现与运动控制

冗余度或超冗余度移动操作臂机器人可在空间站上为宇航员提供很大的帮助.对一个超冗余度移动操作臂机器人系统的设计和实现作了介绍,这个系统由一个8自由度的模块机器人和一个1自由度的电机驱动的导轨组成;对该系统的逆运动学解法进行了讨论,提出了一种基于避关节极限与位形优化的简化逆运动学控制方法;并提供了仿真和实验结果.     

Synthetic Aperture Radar

The general theory of side-looking synthetic aperture radar systems is developed. A simple circuit-theory model is developed; the geometry of the system determines the nature of the prefilter and the receiver (or processor) is the postfilter. The complex distributed reflectivity density appears as the input, and receiver noise is first considered as the interference which limits performance. Analysis and optimization are carried out for three performance criteria (resolution, signal-to-noise ratio, and least squares estimation of the target field). The optimum synthetic aperture length is derived in terms of the noise level and average transmitted power. Range-Doppler ambiguity limitations and optical processing are discussed briefly. The synthetic aperture concept for rotating target fields is described. It is observed that, for a physical aperture, a side-looking radar, and a rotating target field, the azimuth resolution is ?/? where ? is the change in aspect angle over which the target field is viewed, The effects of phase errors on azimuth resolution are derived in terms of the power density spectrum of the derivative of the phase errors and the performance in the absence of phase errors.     

方位扫描SAR区域成像研究

研究在SAR区域成像中,通过天线波束方位扫描扩大成像区方位宽度的机理以及信号处理方法。首先描述天线波束扫描的几何关系,推导出为达到要求的成像分辨率以及成像区方位宽度所需的天线波束扫描角速度和扫描角度的计算公式。分析了成像区位置与载机航迹的几何关系。然后讨论方位扫描SAR区域成像信号处理方法,并给出系统点目标响应仿真结果。最后,用试飞实测数据成像做了验证。     

A model of air traffic controllers' conflict detection and conflict resolution

A model of the mental activities of en route controllers in air traffic control (ATC) is outlined. As an example of the psychological research rendering the basis for this model, the methods and results of an experiment with experienced controllers is sketched which is concerned with conflict detection in ATC. Further, a procedure for conflict resolution is described, supplementing the general model. This procedure is designed to be transformed into a computer based assisting system in ATC. Problems and functions of operator models in the development of new technologies in air traffic management are discussed.     

Hardware-Constrained Hybrid Coding of Video Imagery

The design, implementation, and performance of a video bandwidth compression system is described. In this system, compression is obtained by several methods including the use of DCT/DCPM hybrid coding, frame rate reduction, and resolution reduction. The overall compression ratio is up to 1000:1. The hardware-constrained design of the DCT and the DPCM is described and a new method is derived to solve the optimum integer bit-assignment problem associated with the block quantization process in the DPCM. Computer simulation results are presented which predict that the performance of the system using the derived optimal bit assignment method is superior to those obtained by other bit assignment methods. The real-time hybrid coding system design is optimized for a set of ?modified? average statistics to compress a wide variety of input video images. This approach eliminates the problem of nonzero dc mean value which could otherwise cause serious degradations in the system performance. The compression system is fully implemented and the quality of the reconstructed video as predicted by computer simulation has been demonstrated by the actual hardware performance. The PSNR of the reconstructed imagery is in excess of 36 dB at 2 bits per pixel.     

Tracking Multiple Targets Simultaneously with a Phased Array Radar

A new technique is described by which radar tracks can be established and maintained in a dense multitarget environment. These targets may fly in formation, maneuver relative to each other, or be on crossing paths. They may fade and reappear, lose their resolution, or become resolved. If the formation members move apart, the formation track is split into separate tracks. Typical requirements for a formation tracking system are stated, followed by a discussion of the principles on which this design is based. The same logic applies both to single targets and to forma. tions. Finally, results from field tests are presented.     

无切口连续拉深成形工艺分析及模具设计要点

阐述了无切口连续拉深成形的工艺分析思路和模具设计要点，并对实际生产中出现的问题进行了剖析，给出了解决问题的办法。     

用于SAR运动补偿的DGPS/SINS组合系统研究

使用考虑位置误差相关项的伪距率观测模型 ,研究了用于合成孔径雷达运动补偿的差分 GPS/ SINS伪距率组合系统。结果表明 ,组合系统的长期位置精度能达到 1 m左右。 GPS数据更新率低于 INS,在 GPS测量时间间隔内 ,组合系统的性能仅由 INS决定。虽然 INS误差随时间积累 ,在 GPS数据更新率为 1 s的情况下 ,即使采用中等精度的惯性仪表 ,其相对位置精度为厘米级 (这里相对位置精度指组合系统在 GPS测量时间间隔内位置误差的变化范围)。     

Application of Ground/Air Data Link to General Aviation Operations

The Federal Aviation Administration (FAA) is currently upgrading secondary surveillance radars with systems which will have an integral data link capability, the Mode Select (Mode S) beacon system. These new systems will allow two-way data communications between ground systems (e.g., weather databases and Air Traffic Control (ATC) systems) and aircraft that are equipped with data link compatible Mode S transponders and suitable display and input devices. Initial data link services include both weather information and ATC advisories. The MITRE Corporation* is developing an in-house capability to perform end-to-end operational evaluation of data link services. Initially, a low-cost, portable pilot position man-machine interface is being developed for use in general aviation operations. The objective is to explore operational issues in laboratory and limited flight test environments, and to demonstrate these services on a data link I/O device, a laptop portable personal computer (PC) with touch panel. A group of pilots will bench test the interface design, and the results will be incorporated into the design used in flight testing. This paper describes the project's objectives and results to date, including implementation details and pilot test results.     

一种高分辨率积分输出的A/D转换电路的设计

针对通常需要高分辨率的模数转换的导航领域,描述了一种高分辨率积分输出的A/D转换电路的设计,论述其工作原理和软硬件设计方案。通过电路仿真和试验分析表明,这种A/D转换电路的设计兼具V/F转换的高精度和A/D转换的高速输出的优点。     

Principle and Design of a Vernier FM Radar System

This paper describes the principle and the signal design of a proposed new FM radar system. In order to measure the surface characteristics of a small target at a long distance, or to discriminate among multiple targets, very accurate range or Doppler resolutions are necessary [1]. The proposed system satisfies the range resolution requirement by detecting the target with two different resolutions: coarse resolution for measuring range, and fine resolution for measuring the target details. The principal advantage of the system is in the vernier scale for the measurement of a distance. The system is just as easily realizable as conventional FM radar, requires no special filters in the receiver, and represents a saving in the required bandwidth for the same range resolution.