Superresolution HRR ATR with high definition vector imaging

A new 1-D template-based automatic target recognition (ATR) algorithm is developed and tested on high range resolution (HRR) profiles formed from synthetic aperture radar (SAR) images of targets taken from the Moving and Stationary Target Acquisition and Recognition (MSTAR) data set. In this work, a superresolution technique known as High Definition Vector Imaging (HDVI) is applied to the HRR profiles before the profiles are passed through ATR classification. The new I-D ATR system using HDVI demonstrates significantly improved target recognition compared with previous I-D ATR systems that use conventional image processing techniques. This improvement in target recognition is quantified by improvement in probability of correct classification (PCC). More importantly, the application of HDVI to HRR profiles helps to maintain the same ATR performance with reduced radar resource requirements     

Automatic target recognition of time critical moving targets using1D high range resolution (HRR) radar

Synthetic Aperture Radar (SAR) imaging and Automatic Target Recognition (ATR) of moving targets pose a significant challenge due to the inherent difficulty of focusing moving targets. As a result, ATR of moving targets has recently received increased interest. High Range Resolution (HRR) radar mode offers an approach for recognizing moving targets by forming focused HRR profiles with significantly enhanced target-to-(clutter+noise) (T/(C+N)) via Doppler filtering and/or clutter cancellation. A goal of HRR ATR transition is the implementation and evaluation of algorithms exhibiting robustness under extended operating conditions (EOC). The public domain Moving and Stationary Target Acquisition and Recognition (MSTAR) data set was used to study 1D template-based ATR development and performance. Due to the unavailability of a statistically significant moving ground target data set, this approach was taken as an interim step in assessing the separability of ground targets when using range only discriminants. This report summarizes the data and algorithm methodology, simulated performance results, and recommendations     

Moving target detection via airborne HRR phased array radar

We study moving target detection in the presence of temporally and spatially correlated ground clutter for airborne high range resolution (HRR) phased array radar. We divide the HRR range profiles into large range segments to avoid the range migration problems that occur in the HRR radar data. Since each range segment contains a sequence of HRR range bins, no information is lost due to the division and hence no loss of resolution occurs. We show how to use a vector autoregressive (VAR) filtering technique to suppress the ground clutter. Then a moving target detector based on a generalized likelihood ratio test (GLRT) detection strategy is derived. The detection threshold is determined according to the desired false alarm rate, which is made possible via an asymptotic statistical analysis. After the target Doppler frequency and spatial signature vectors are estimated from the VAR-filtered data as if a target were present, a simple detection variable is computed and compared with the detection threshold to render a decision on the presence of a target. Numerical results are provided to demonstrate the performance of the proposed moving target detection algorithm     

Time-varying autoregressive modeling of HRR radar signatures

A time-varying autoregressive (TVAR) model is used for the modeling and classification of high range resolution (HRR) radar signatures. In this approach, the TVAR coefficients are expanded by a low-order discrete Fourier transform (DFT). A least-squares (LS) estimator of the TVAR model parameters is presented, and the maximum likelihood (ML) approach for determining the model order is also presented. The validity of the TVAR modeling approach is demonstrated by comparing with other approaches in estimating time-varying spectra of synthetic signals. The estimated TVAR model parameters are also used as features in classifying HRR radar signatures with a neural network. In the experiment with two sets of noncooperating target identification (NCTI) data, about 93% of samples are correctly classified     

Performance improvement for constellation SAR using signal processing techniques

A new concept of spaceborne synthetic aperture radar (SAR) implementation has recently been proposed - the constellation of small spaceborne SAR systems. In this implementation, several formation-flying small satellites cooperate to perform multiple space missions. We investigate the possibility to produce high-resolution wide-area SAR images and fine ground moving-target indicator (GMTI) performance with constellation of small spaceborne SAR systems. In particular, we focus on the problems introduced by this particular SAR system, such as Doppler ambiguities, high sparseness of the satellite array, and array element errors. A space-time adaptive processing (STAP) approach combined with conventional SAR imaging algorithms is proposed which can solve these problems to some extent. The main idea of the approach is to use a STAP-based method to properly overcome the aliasing effect caused by the lower pulse-repetition frequency (PRF) and thereby retrieve the unambiguous azimuth wide (full) spectrum signals from the received echoes. Following this operation, conventional SAR data processing tools can be applied to focus the SAR images fully. The proposed approach can simultaneously achieve both high-resolution SAR mapping of wide ground scenes and GMTI with high efficiency. To obtain array element errors, an array auto-calibration technique is proposed to estimate them based on the angular and Doppler ambiguity analysis of the clutter echo. The optimizing of satellite formations is also analyzed, and a platform velocity/PRF criterion for array configurations is presented. An approach is given to make it possible that almost any given sparse array configuration can satisfy the criterion by slightly adjusting the PRF. Simulated results are presented to verify the effectiveness of the proposed approaches.     

FOPEN SAR imaging using UWB step-frequency and random noisewaveforms

The detection and identification of targets obscured by foliage have been topics of great interest. Several synthetic aperture radar (SAR) experiments have demonstrated promising images of terrain and man-made objects obscured by dense foliage, by using either linear frequency modulation (LFM) or step-frequency waveforms. We present here the methodology and results of a comparative study on foliage penetration (FOPEN) SAR imaging using ultrawideband (UWB) step-frequency and random noise waveforms. A statistical-physical foliage transmission model is developed for simulation applications. The foliage obscuring pattern is analyzed by means of the technique of paired echoes. The results of the comparative study demonstrates the ability of a UHF band UWB random noise radar to be used as a FOPEN SAR. Advantages of the random noise radar system include covert detection and immunity to radio frequency interference (RFI)     

基于快速提升KLDA准则的MSTARSAR目标特征提取与识别研究

 核线性判别准则(KLDA)是一种非线性特征提取准则。利用KLDA提取MSTAR SAR图像特征，既达到较理想的识别概率，又可克服SAR图像对方位的敏感性。但此时训练样本最多，KLDA的计算代价高。为了解决这一问题，提出一种快速特征向量选择法（FFVS）。FFVS把类别和方位相似的SAR图像分成若干组，然后快速选择各组中部分图像组成一个集合且其到高维特征空间的映射作为一组基。利用该组基的线性组合表示任一样本和投影算子，降低了KLDA中核矩阵的阶数，达到降低计算代价的目的。实验结果表明，FFVS与KLDA组合能达到理想的识别结果。     

Effects of Reduced SAR Azimuth Processing

Several approaches are evaluated for reducing the large data handling and processing loads associated with synthetic aperture radar (SAR) imaging systems. The effects of data abbreviation on SAR images were studied theoretically as well as experimentally with SEASAT-A data. Image degradation was measured in terms of azimuth resolution and signal-to-clutter ratio. It was found that the degradation of image quality to data rate reduction is graceful. With high time-bandwidth product signals, little or no azimuth resolution degradation was noticed with several data bandwidth reduction techniques that achieve data reduction factors of up to 8. The signal-to-clutter ratio was found to decrease slowly with increasing reduction in data rate.     

OGSRN: Optical-guided super-resolution network for SAR image

Although Convolutional Neural Networks(CNNs) have significantly improved the development of image Super-Resolution(SR) technology in recent years, the existing SR methods for SAR image with large scale factors have rarely been studied due to technical difficulty. A more efficient method is to obtain comprehensive information to guide the SAR image reconstruction.Indeed, the co-registered High-Resolution(HR) optical image has been successfully applied to enhance the quality of SAR image due to it...     

Wavelet preprocessing for high range resolution radarclassification

We develop a wavelet denoising scheme to aid an automatic target recognition (ATR) system in recognizing aircraft from high range resolution radar (HRR) signatures. A template matching classification technique is used with templates formed from synthetically generated signatures. The goal of the classification system is to achieve classification accuracy equivalent to that obtained with measured HRR signatures. Results suggest that a large portion of HRR signature content is nondiscriminatory. The wavelet denoising process removes the nondiscriminatory information, thereby leading to remarkable increases in classification accuracy. Results are shown for HRR signatures from six aircraft     

A technique for enhanced slant range resolution for SAR systems inknowledge-based environment

Synthetic Aperture Radar (SAR) is an airborne (or spaceborne) radar mapping technique for generating high resolution maps of surface target areas including terrain. High resolution is achieved by coherently combining the returns from a number of radar transmissions. The resolution of the images is determined by the parameters of the emissions, with more data giving greater resolution. A requirement of the Microwave Radar Division's SAR radar is to provide classification of targets. This paper presents a technique for enhancing slant range resolution in SAR images by dithering the carrier centre frequency of the transmitted signal. The procedure controls the radar waveforms so they will optimally perform the classification function, rather than provide an image of best quality. It is shown that a Knowledge-Based engineering approach to determining the waveform of the radar gives considerably improved performance as a classifier of targets (of large radar cross-section), even though the corresponding image is degraded     

Efficient ATR using compression

We examine various model-based automatic target recognition (MBATR) classifiers to investigate the utility of model-catalog compression realized via signal-vector quantization (VQ) and feature extraction. We specifically investigate the impact of various compression rates and common automatic target recognition (ATR) scenario variations such as noise and occlusion through simulations on high-range resolution (HRR) radar and synthetic aperture radar (SAR) data. For this data, we show that significant computational savings are possible for modest decreases in classification performance.     

Role of processing geometry in SAR raw data focusing

Synthetic aperture radar (SAR) systems require that a focusing operation be performed on the received backscattered echoes (raw data) to generate high-resolution microwave images. Either due to platform attitude instabilities, or to Earth rotation effects, the SAR raw data may be acquired in "squinted" geometries, i.e., with the radar beam directed with an offset angle (squint angle) from the broadside direction. This research investigates the impact of the focusing operation carried out on squinted raw data acquisitions performed by SAR sensors operating in the stripmap mode. To this end the 2D frequency SAR processing approach is generalized with respect to conical, i.e., nonorthogonal, reference systems. This allows analysis of the geometric, spectral, and phase aberrations introduced in the images by the chosen processing geometry with respect to the acquisition, and identification of the focusing procedure that minimizes these aberrations. The whole theory is validated by experimental results carried out on simulated data. Moreover, the extension of this analysis to the interferometric case where these aberrations may have a significant role is also investigated     

A new fourth-order processing algorithm for spaceborne SAR

A new fourth-order signal aperture radar (SAR) processing algorithm has been developed for a general satellite-Earth relative motion. The two-dimensional exact transfer function (ETF) is calculated and range-variant phase corrections have been calculated in order to process many azimuth lines per block. The ETF together with the phase corrections has been called the fourth-order EETF (extended ETF). It is also shown that a fourth-order EETF is necessary to process high quality images from spaceborne SAR with long integration times with spatial resolution around 1 m. The algorithm is fast and is anticipated to have good phase preservation properties     

Smuggling interdiction using an adaptation of the AN/APG-76multimode radar

The AN/APG-76 multimode radar was designed and developed for a multimode attack fighter application requiring rapid search, detection, identification, and precision location of both airborne and surface targets from long standoff ranges under adverse weather conditions. Unique is the radar's ability to generate SAR images of a selected area while simultaneously detecting and tracking all-speed moving objects located within that imaged region. Northrop Grumman Norden Systems has recently upgraded and adapted this radar to smuggling interdiction and related law enforcement missions. These adaptations have added an integrated GPS/INS subsystem for enhanced self-navigation and target location accuracy, a long range wide-band digital data link and ground station for mission control and data dissemination, a 3-D interferometric SAR imaging capability for detailed high resolution topographic mapping, and 1 meter and 0.3 meter resolution SAR modes for positive target identification. Additionally, the radar has been installed into wing-mounted pods and adapted for side-looking and 360 degree coverage applications. Automatic target detection and enhanced-range sea-surveillance and air-targeting modes are also now available through the use of open architecture commercial processors and non-proprietary transportable programming languages     

一种提高SAR目标识别率的有效方法

在合成孔径雷达自动目标识别SAR ATR中，SAR像的预处理是提高识别率的关键技术之一。给出了一种简单有效的SAR图像预处理方法，该方法首先对SAR目标像进行对数变换后，再做傅立叶变换。经预处理后的SAR像用支持矢量机SVM分类器进行目标识别。实验结果表明：本方法不但有效地提高了目标识别率，而且保证了目标的平移不变性并具有良好的推广能力。     

Feature enhancement and ATR performance using nonquadratic optimization-based SAR imaging

We present an evaluation of the impact of a recently proposed synthetic aperture radar (SAR) imaging technique on feature enhancement and automatic target recognition (ATR) performance. This image formation technique is based on nonquadratic optimization, and the images it produces appear to exhibit enhanced features. We quantify such feature enhancement through a number of criteria. The findings of our analysis indicate that the new feature-enhanced SAR image formation method provides images with higher resolution of scatterers, and better separability of different regions as compared with conventional SAR images. We also provide an ATR-based evaluation. We run recognition experiments using conventional and feature-enhanced SAR images of military targets, with three different classifiers. The first classifier is template based. The second classifier makes a decision through a likelihood test, based on Gaussian models for reflectivities. The third classifier is based on extracted locations of the dominant target scatterers. The experimental results demonstrate that the new feature-enhanced SAR imaging method can improve the recognition performance, especially in scenarios involving reduced data quality or quantity.     

Target prescreening based on a quadratic gamma discriminator

This work presents the development, analysis and validation of a new target discrimination module for synthetic aperture radar (SAR) imagery based on an extension of gamma functions to 2-D. Using the two parameter constant false-alarm rate (CFAR) stencil as a prototype, a new stencil based on 2-D gamma functions is used to estimate the intensity of the pixel under test and its surroundings. A quadratic discriminant function is created from these estimates, which is optimally adapted with least squares in a training set of representative clutter and target chips. This discriminator is called the quadratic gamma discriminator (QGD). The combination of the CFAR and the QGD was tested in realistic SAR environments and the results show a large improvement of the false alarm rate with respect to the two-parameter CFAR, both with high resolution (1 ft) fully polarimetric SAR and with one polarization, 1 m SAR data     

VSAR: a high resolution radar system for ocean imaging

The velocity synthetic aperture radar (VSAR) is a conceptual synthetic aperture radar (SAR)-based sensor system for high resolution ocean imaging. The VSAR utilizes data collected by a multielement SAR system, to extract information not only about the radar reflectivity of the observed area, but also about the radial velocity of the scatterers in each pixel. This is accomplished by making use of the phase information contained in multiple SAR images, and not just the magnitude information as in conventional SAR. Using this velocity information, the VSAR attempts to compensate for the velocity distortion inherent in conventional SAR and to reconstruct the ocean reflectivity. We present the basic theory of the VSAR system and its performance. We also provide an analysis of the VSAR imaging mechanism for a statistical model of the radar returns, designed to capture the effects of speckle and of resolution degradation due to the decorrelation of the radar returns     

Advanced high-order nonlinear chirp scaling algorithm for high-resolution wide-swath spaceborne SAR

Spaceborne Synthetic Aperture Radar (SAR) is a well-established and powerful imaging technology that can provide high-resolution images of the Earth’s surface on a global scale. For future SAR systems, one of the key capabilities is to acquire images with both high-resolution and wide-swath. In parallel to the evolution of SAR sensors, more precise range models, and effective imaging algorithms are required. Due to the significant azimuth-variance of the echo signal in High-Resolution Wide-Swath (HRWS) SAR, two challenges have been faced in conventional imaging algorithms. The first challenge is constructing a precise range model of the whole scene and the second one is to develop an effective imaging algorithm since existing ones fail to process high-resolution and wide azimuth swath SAR data effectively. In this paper, an Advanced High-order Nonlinear Chirp Scaling (A-HNLCS) algorithm for HRWS SAR is proposed. First, a novel Second-Order Equivalent Squint Range Model (SOESRM) is developed to describe the range history of the whole scene, by introducing a quadratic curve to fit the deviation of the azimuth FM rate. Second, a corresponding algorithm is derived, where the azimuth-variance of the echo signal is solved by azimuth equalizing processing and accurate focusing is achieved through a high-order nonlinear chirp scaling algorithm. As a result, the whole scene can be accurately focused through one single imaging processing. Simulations are provided to validate the proposed range model and imaging algorithm.