共查询到20条相似文献,搜索用时 46 毫秒
1.
杨天生 《航空标准化与质量》2023,(5):46-51
针对当前航空装备保障能力需求分析中存在的方法不明确和流程不规范等问题,基于体系结构框架思想,提出航空装备保障能力需求分析方法,构建“作战任务分析-保障任务分析-保障需求分析-能力需求分析”为主线的总体技术框架,规范航空装备保障能力需求分析流程,研究需求分析各环节的具体活动及其分析方法,并以典型无人机为例,为验证基于DoDAF的航空装备保障能力需求分析方法的科学性和有效性提供借鉴意义。 相似文献
2.
3.
针对航空四站装备保障安全评价问题,提出了基于层次分析法和熵权法的综合权重模糊评价模型。在构 建航空四站装备保障安全评价指标体系的基础上,综合利用层次分析法、熵权法的优点,改进了权重确立方法。该 方法将影响因素的主观性与客观性相结合,得出各指标综合权重。通过模糊综合评价法对某航空四站装备保障实 例分析,结果表明该权重确立法客观合理,可为航空四站装备保障风险控制提供判断依据。 相似文献
4.
甲板航空保障作业流程是连接舰载机回收和出动的重要纽带,是舰载机机群作战能力生成的核心环节。面向航空保障作业部分流程的不确定性,以航空保障完工时间最小化为优化目标,考虑甲板作业过程所涉及的固定前后序流程约束、不可并行作业约束、保障人员约束、保障设备约束和资源供给能力约束等约束条件,构建了甲板航空保障作业流程优化的数学模型;在此基础上,针对问题的求解设计了相适应的GRASP算法,在初始解构造阶段引入了基于规则的生成策略,在邻域搜索阶段采用双向对齐机制进行局部优化。基于保障任务案例的仿真结果显示,该算法有效地解决了甲板航空保障作业流程优化且相对于其他经典算法更为高效和稳定。 相似文献
5.
航空装备交互式综合维修信息集成系统设计与使用模式 总被引:2,自引:0,他引:2
介绍了依据航空装备现有的纸质技术文件如何制作交互式电子技术文件信息集成系统的设计模型与流程,提出了适合我国国情的综合维修信息内容的集成方法,给出了基于XML 数据格式的数据库内容设计方法,探讨了单机版和网络版的IETM发布、使用和管理模式.对基于信息化条件下的航空装备技术文件的保障具有重要的指导意义。 相似文献
6.
从军用航空装备技术保障的特点和现状出发,分析了标准化在军用航空装备技术保障工作中的重要作用,阐述了标准化工作可促进航空装备技术保障过程及各要素持续改进的观点,提出了军用航空装备技术保障标准化工作的策略和建议。 相似文献
7.
8.
保障设备通用化是航空装备系统减小保障规模、发挥最大保障效能的重要途径。通用化保障设备选型则是通过在真实的使用环境开展初始试用和评价,在备选型号中优选出合格供应商、适用的型号。对于航空装备系统的保障能力需求,首先构建通用化保障设备能力评估指标体系;其次,分析竞争性试验的设计需求和原则,设计适用于外场评估的试验方案和流程。同时,给出可操作性评估准则转化的一般过程,形成基于关联度的统型竞标试验权重确定方法。应用表明:该方法能够大幅提高我国航空统型保障设备面向多机型对接的试验流程的规范化,缩短试飞周期,具有重大的军事和经济效益。 相似文献
9.
航空装备IETM研制的典型流程和方法 总被引:1,自引:0,他引:1
丁凡 《航空标准化与质量》2012,(2):36-39
介绍了S1000D描述的IETM研制流程和方法,论述了我国航空装备IETM的典型研制流程,规划了研制IETM的标准体系和组成,对航空装备IETM研制工作提出建议. 相似文献
10.
针对航空装备维修保障中存在的维修保障能力难以满足保障需求的问题,结合马尔科夫决策过程与图示评审技术,提出了一种新的航空装备维修保障流程优化模型。首先在GERT网络中嵌入决策节点,以总维修时间为目标函数,构建了航空装备维修保障流程MDP-GERT网络模型;然后利用策略迭代法和蒙特卡罗仿真技术,给出了模型的求解方法;最后,结合案例得到多机充氮流程的优化工序和预计时间,验证了模型和算法的可行性和有效性。结果表明:利用该模型对保障流程进行优化,能够有效地为缩短维修保障时间提供决策支持,提高维修保障效率。 相似文献
11.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
12.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
13.
14.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
15.
16.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
17.
Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis 总被引:2,自引:0,他引:2
GAO Hong-liang ZHANG Hui WANG Shu-juan 《中国航空学报》2007,20(1):75-80
Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved. 相似文献
18.
19.
Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters 总被引:1,自引:0,他引:1
ZHOU Hong-guo WEI Xiu-ying MAO Chang-hui XIONG Yu-hua QIN Guang-rong 《中国航空学报》2007,20(2):172-176
The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃). 相似文献
20.
YANG Fen ZHANG Xue-jun TIAN Fang WU Xu GAN Fu-xing 《中国航空学报》2007,20(2):181-186
Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration. 相似文献