多目标跟踪的核粒子概率假设密度滤波算法

提出一种新的多目标跟踪算法：核粒子概率假设密度滤波算法(KP-PHDF)。算法的创新点在概率假设密度滤波算法(PHDF)的目标状态提取步骤,以粒子概率假设密度滤波算法为框架,并运用结合了mean-shift算法的核密度估计(KDE)理论进行概率假设密度(PHD)分布的二次估计、提取PHD峰值位置作为目标状态估计值。分析与多目标跟踪(MTT)仿真的结果表明,与现有序列蒙特卡罗概率假设密度滤波算法（SMC-PHDF）相比,在相同仿真条件下新算法的估计精度提高30.5%。     

Rao-Blackwellized粒子概率假设密度滤波算法

针对多目标跟踪（MTT）,提出一种新的基于随机集的滤波算法,称为Rao-Blackwellized粒子概率假设密度滤波算法（RBP-PHDF）。算法运用Rao-Blackwellized思想,通过挖掘分析“混合线性/非线性模型”的结构,采用序列蒙特卡罗（SMC）方法预测与估计概率假设密度（PHD）迭代式中各个目标的非线性状态,并利用非线性状态粒子中包含的信息,使用卡尔曼滤波器（KF）对线性状态进行预测与估计。以更好地估计PHD进而提高各目标状态估计精度。分析与MTT仿真的结果表明,在相同的仿真条件下,与现有序列蒙特卡罗概率假设密度滤波算法（SMC-PHDF）相比,RBP-PHDF在降低粒子维数、减少计算量的同时,有效提升了估计精度。     

新生目标强度未知的双门限粒子PHD滤波器

传统粒子概率假设密度(PHD)滤波器假定新生目标强度已知,当新生目标在整个观测区域随机出现时不再适用。为解决新生目标强度未知时的多目标跟踪问题,提出了一种基于量测信息的双门限粒子PHD(PHD-DT)滤波器。首先基于似然函数设定门限对存活目标量测进行粗提取,利用上一时刻的目标估计值构建圆形波门进行精细提取,并对门限设定方法进行分析,然后根据提取结果对目标PHD进行分解,得到存活目标和新生目标的PHD预测及更新表达式,最后给出了滤波器的实现方法并同基于量测驱动的PHD(PHD-M)滤波器和Logic+联合概率数据互联(JPDA)方法进行了仿真对比。仿真结果表明,在新生目标强度未知时,PHD-DT可有效避免Logic+JPDA在杂波背景下因航迹起始错误带来的估计误差,并较好地解决了PHD-M的目标数目过估问题,多目标估计性能更优,且杂波越强性能优势越明显。     

增量粒子滤波方法

提出增量粒子滤波的概念,建立增量粒子滤波模型及其分析方法,给出其算法.对于工程实际中存在的由未知系统误差的影响而无法精确建立量测似然函数的这一问题,提出增量粒子滤波方法,通过对带有未知系统误差的量测数据进行校正,获得精确的量测似然函数,建立精确的增量粒子滤波模型,从而消除这种未知系统误差的影响,减少重采样的次数,较好地保存了粒子的多样性,提高非线性滤波的精度.模拟仿真中,重采样的次数减少41.7%,滤波误差均值和均方根误差分别降低了45.3%和70.1%,有效地改善了滤波的效果.      

交互多模型PHD滤波跟踪多目标方法

在机动多目标跟踪问题中,目标数未知或随时间而变化,概率假设密度（PHD）滤波可以在每一时间步估计多目标状态和目标数,但单模型方法不能给出精确的估计。提出了一种交互多模型PHD滤波方法,建立多模型描述多目标运动方式,利用PHD滤波结合多模型跟踪目标运动轨迹。同时,给出了多传感器交互多模型PHD滤波方法,以提高目标跟踪精度。     

区域杂波估计的多目标跟踪方法

高斯粒子概率假设密度（PHD）滤波往往假定杂波密度参数已知,这种做法对于实际应用是不现实的。此外,杂波的参数值通常依赖于环境条件,可能随时间发生变化。因此,多目标跟踪算法中需要实时准确估计杂波密度的参数。基于此,提出了一种多目标跟踪的区域杂波估计方法。首先根据量测信息在线估计出场景中的杂波数目,然后估计落入目标附近感兴趣区域的杂波数,并估计每个目标感兴趣区域杂波强度。仿真结果表明,在复杂场景下算法的跟踪性能明显优于未进行杂波估计的多目标跟踪算法,提高了跟踪的实时性和跟踪精度。     

涡扇发动机故障诊断中粒子滤波改进方法

针对标准粒子滤波算法诊断步数多且诊断结果噪声水平高的问题,提出伪协方差和自适应似然分布结合的改进粒子滤波算法。该算法通过使用伪协方差代替了粒子集协方差,保证采样得到的粒子能够更真实地反映突变情况,减少诊断步数;通过对似然分布自适应调整,增加其与先验分布的重叠区域,提高抽样率,增加有效粒子数,降低诊断结果噪声水平。发动机健康参数估计仿真结果表明:与标准粒子滤波算法相比,改进的粒子滤波算法能使诊断速度提高约27%,诊断精度提高约38%,有效地减少了突变故障的诊断步数,并显著降低了诊断结果的噪声水平。     

自适应增量粒子滤波方法

提出自适应增量粒子滤波(AIPF)的概念和定义,建立AIPF模型,给出了分析方法和主要的计算步骤.对于许多实际工程(如深空探测)中存在的由未知系统误差的影响而无法精确建立量测似然函数及滤波过程中的粒子匮乏等问题,通过增量粒子滤波模型对滤波过程中的粒子数进行自适应调整,从而消除这种未知系统和滤波粒子匮乏的影响,自动调整粒子,提高非线性滤波的精度.仿真计算中,滤波误差均值和方差分别降低为原来的3.8%和19.6%.该方法有效地改善了滤波效果,计算简单,便于工程应用.      

多目标跟踪的概率假设密度粒子滤波

在多目标跟踪中,当目标数很大时,目标状态的联合分布的计算量会非常大。如果目标独立运动,可用各目标分别滤波来代替,但这要求考虑数据互联问题。文章介绍一种可以解决计算量问题的方法,只需计算联合分布的一阶矩——概率假设密度(PHD),PHD在任意区域S上的积分是S内目标数的期望值。因未记录目标身份,避免了数据互联问题。仿真中,传感器为被动雷达,目标观测值为距离、角度及速度时,对上述的PHD滤波进行了粒子实现,并对观测值是否相关的不同情况进行比较。PHD粒子滤波应用在非线性模型的多目标跟踪,实验结果表明,滤波可以稳健跟踪目标数为变数的情况,得到了接近真实情况的结果。     

基于CPHD的双层粒子滤波目标跟踪算法

常规基于势概率假设密度滤波(Cardinalized Probability Hypothesis Density,CPHD)的粒子滤波(Particle Fil? ter,PF)跟踪算法应用于多目标跟踪时,容易遇到因粒子数量增加而带来的运算效率下降、目标数目估计不准的问题。文章基于常规粒子滤波 CPHD跟踪算法,通过部署双层粒子,提出基于势概率假设密度滤波的双层粒子滤波 (Two-Layer Particle Filter-CPHD,TLPF-CPHD)算法,以便提高目标数目及状态估计精度。仿真实验结果证明,相比于常规 PF-CPHD算法,新算法具有更好的目标数目和状态估计准确性。     

Particle flters for probability hypothesis density flter with the presence of unknown measurement noise covariance

In Bayesian multi-target fltering,knowledge of measurement noise variance is very important.Signifcant mismatches in noise parameters will result in biased estimates.In this paper,a new particle flter for a probability hypothesis density（PHD）flter handling unknown measurement noise variances is proposed.The approach is based on marginalizing the unknown parameters out of the posterior distribution by using variational Bayesian（VB）methods.Moreover,the sequential Monte Carlo method is used to approximate the posterior intensity considering non-linear and non-Gaussian conditions.Unlike other particle flters for this challenging class of PHD flters,the proposed method can adaptively learn the unknown and time-varying noise variances while fltering.Simulation results show that the proposed method improves estimation accuracy in terms of both the number of targets and their states.     

Probability hypothesis density filter with adaptive parameter estimation for tracking multiple maneuvering targets

The probability hypothesis density (PHD) filter has been recognized as a promising tech-nique for tracking an unknown number of targets. The performance of the PHD filter, however, is sensitive to the available knowledge on model parameters such as the measurement noise variance and those associated with the changes in the maneuvering target trajectories. If these parameters are unknown in advance, the tracking performance may degrade greatly. To address this aspect, this paper proposes to incorporate the adaptive parameter estimation (APE) method in the PHD filter so that the model parameters, which may be static and/or time-varying, can be estimated jointly with target states. The resulting APE-PHD algorithm is implemented using the particle filter (PF), which leads to the PF-APE-PHD filter. Simulations show that the newly proposed algorithm can correctly identify the unknown measurement noise variances, and it is capable of tracking mul-tiple maneuvering targets with abrupt changing parameters in a more robust manner, compared to the multi-model approaches.     

非线性非高斯模型的高斯和PHD滤波算法(英文)

A new multi-target filtering algorithm, termed as the Gaussian sum probability hypothesis density （GSPHD） filter, is proposed for nonlinear non-Gaussian tracking models. Provided that the initial prior intensity of the states is Gaussian or can be identified as a Gaussian sum, the analytical results of the algorithm show that the posterior intensity at any subsequent time step remains a Gaussian sum under the assumption that the state noise, the measurement noise, target spawn intensity, new target birth intensity, target survival probability, and detection probability are all Gaussian sums. The analysis also shows that the existing Gaussian mixture probability hypothesis density （GMPHD） filter, which is unsuitable for handling the non-Gaussian noise cases, is no more than a special case of the proposed algorithm, which fills the shortage of incapability of treating non-Gaussian noise. The multi-target tracking simulation results verify the effectiveness of the proposed GSPHD.     

Track-before-detect for Infrared Maneuvering Dim Multi-target via MM-PHD

In this paper, we present a novel and efficient track-before-detect (TBD) algorithm based on multiple-model probability hypothesis density (MM-PHD) for tracking infrared maneuvering dim multi-target. Firstly, the standard sequential Monte Carlo probability hypothesis density (SMC-PHD) TBD-based algorithm is introduced and sequentially improved by the adaptive process noise and the importance re-sampling on particle likelihood, which result in the improvement in the algorithm robustness and convergence speed. Secondly, backward recursion of SMC-PHD is derived in order to ameliorate the tracking performance especially at the time of the multi-target arising. Finally, SMC-PHD is extended with multiple-model to track maneuvering dim multi-target. Extensive experiments have proved the efficiency of the presented algorithm in tracking infrared maneuvering dim multi-target, which produces better performance in track detection and tracking than other TBD-based algorithms including SMC-PHD, multiple-model particle filter (MM-PF), histogram probability multi-hypothesis tracking (H-PMHT) and Viterbi-like.     

Variational Bayesian labeled multi-Bernoulli filter with unknown sensor noise statistics

It is difficult to build accurate model for measurement noise covariance in complex back-grounds. For the scenarios of unknown sensor noise variances, an adaptive multi-target tracking algorithm based on labeled random finite set and variational Bayesian (VB) approximation is pro-posed. The variational approximation technique is introduced to the labeled multi-Bernoulli (LMB) filter to jointly estimate the states of targets and sensor noise variances. Simulation results show that the proposed method can give unbiased estimation of cardinality and has better performance than the VB probability hypothesis density (VB-PHD) filter and the VB cardinality balanced multi-target multi-Bernoulli (VB-CBMeMBer) filter in harsh situations. The simulations also confirm the robustness of the proposed method against the time-varying noise variances. The computational complexity of proposed method is higher than the VB-PHD and VB-CBMeMBer in extreme cases, while the mean execution times of the three methods are close when targets are well separated.     

An improved multiple model GM-PHD filter for maneuvering target tracking

In this paper, an improved implementation of multiple model Gaussian mixture probability hypothesis density (MM-GM-PHD) filter is proposed. For maneuvering target tracking, based on joint distribution, the existing MM-GM-PHD filter is relatively complex. To simplify the filter, model conditioned distribution and model probability are used in the improved MM-GM-PHD filter. In the algorithm, every Gaussian components describing existing, birth and spawned targets are estimated by multiple model method. The final results of the Gaussian components are the fusion of multiple model estimations. The algorithm does not need to compute the joint PHD distribution and has a simpler computation procedure. Compared with single model GM-PHD, the algorithm gives more accurate estimation on the number and state of the targets. Compared with the existing MM-GM-PHD algorithm, it saves computation time by more than 30%. Moreover, it also outperforms the interacting multiple model joint probabilistic data association (IMMJPDA) filter in a relatively dense clutter environment.