Time-frequency method for detecting an accelerating target in sea clutter

The authors design a time-frequency (TF) method for use in high-frequency surface-wave radar (HFSWR) for detecting a small accelerating target in sea clutter. The clutter is modelled by pseudo targets moving with Bragg velocity towards and away from the radar. The design is based on the Wigner distribution (WD) defined by Chan (type-III WD, in our terminology) rather than the WD defined by Claasen and Mecklenbrauker (1980) (2times type-I WD, in our terminology). Like the type-I WD, the type-III WD also concentrates a chirp signal onto a straight line in the TF plane. The type-III WD has the following advantages: 1) Its range of unambiguously measurable frequencies (RUMF) is [-pi,pi] rad/s, whereas for the type-I WD the RUMF is [-pi/2,pi/2] rad/s. 2) It allows a target separated from the clutter by pi rad/s to be detected, whereas the type-I WD coalesces such a target with the clutter and thereby mask it. An ambiguity function (AF) was defined corresponding to the type-III WD and use it to derive a smoothed type-III WD that mitigates the clutter. The smoothed type-III WD method is applied to real radar data and shown to be superior to the conventional Fourier transform method. The advantages of the type-III WD over the type-I WD are also demonstrated. The design principles laid out in the paper can also be used to develop a TF method for use in air traffic control radar (ATCR) for detecting an accelerating target in land clutter     

Radar detection in clutter

Clutter is defined as any unwanted radar return. The presence of clutter in a range/Doppler cell complicates the detection of a target return signal in that cell. In order to quantify the effect of clutter on the probability of detection, we must first specify sets of models suitable for representing the clutter and target. The simplest and most common model for clutter is based on the gamma density. We include two additional models, the NCG and NCGG clutter models for low grazing angles. They are motivated by physical arguments, the latter of which can accommodate the well-known phenomenon of speckle. Using one of these models for clutter together with one of several models for targets, we determine, in a range/Doppler cell, expressions for probabilities of detection of a target in the presence of clutter. It is important to control the probability of false alarms. The presence of clutter in a cell necessitates an increase in the detection threshold setting in order to control false alarms, thus lowering the probability of detection. If the clutter level is unknown, then we need to take measurements of the clutter and use it to adjust the threshold. The more clutter samples we take, the better the estimate of the clutter level and the less is the resulting detection loss. Using the expressions for the probability of detection in clutter, we can quantify the detection loss for a pair of commonly used constant false-alarm rate (CFAR) techniques and investigate how the loss varies with different parameter values, especially with regard to the number of clutter samples taken to estimate the clutter level.     

A Model for Generating Synthetic VHF SAR Forest Clutter Images

We propose a model for generating low-frequency synthetic aperture radar (SAR) clutter that relates model parameters to physical characteristics of the scene. The model includes both distributed scattering and large-amplitude discrete clutter responses. The model also incorporates the SAR imaging process, which introduces correlation among image pixels. The model may be used to generate synthetic clutter for a range of environmental operating conditions for use in target detection performance evaluation of the radar and automatic target detection/recognition algorithms. We derive a statistical representation of the proposed clutter model's pixel amplitudes and compare with measured data from the CARABAS-II SAR. Simulated clutter images capture the structure and amplitude responses seen in the measured data. A statistical analysis shows an order of magnitude improvement in model fit error compared with standard maximum-likelihood (ML) density fitting methods.     

Clutter Suppression by Complex Weighting of Coherent Pulse Trains

Uniform coherent pulse trains offer a practical solution to the problem of designing a radar signal possessing both high range and range-rate resolution. The Doppler sensitivity provides some rejection of off-Doppler (clutter) returns in the matched filter receiver. This paper considers the use of a processor in which members of the received pulse train are selectively weighted in amplitude and phase to improve clutter suppression. The techniques described are particularly suitable for rejecting interference entering the processor through ambiguous responses (range sidelobes) of the signal. The complex weights which are derived are optimum in the sense that they produce the maximum clutter suppression for a given detection efficiency. In determining these weights, it is assumed that the distribution of clutter in range and range rate relative to targets of interest is known. Thus, clutter suppression is achieved by reducing the sidelobe levels in specified regions of the receiver response. These techniques are directly applicable to array antennas; the analogous antenna problem would be to reduce sidelobe levels in a particular sector while preserving gain. Complex weighting is most successful when the clutter is limited in both range and velocity.     

Further results on adaptive filtering with embedded CFAR

Among the few known adaptive filtering algorithms which have an embedded (integrated) constant false alarm rate (CFAR) performance feature, the generalized likelihood ratio (GLR) test algorithm has been found to be robust in non-Gaussian clutter. This paper examines the detection performance of the GLR algorithm in nonhomogeneous/nonstationary clutter environments which lead to nonidentical distribution of secondary (training) data. For two common types of nonhomogeneity, i.e., the so-called “signal contamination” and “clutter edge”, the asymptotic detection performance is derived and compared with simulations. These asymptotic results are relatively simple to use and they predict the GLR performance in nonhomogeneous environments quite well. The GLR performance loss due to the nonhomogeneity is also evaluated. It is found that the “generalized angle” between the desired and contaminating signal plays an important role in the study of the effects of signal contamination. It is also found that the performance degradation due to the clutter edge depends largely on the width of the clutter spectrum and target-clutter Doppler separation     

A CFAR Design for a Window Spanning Two Clutter Fields

When the heterogeneous clutter field spanning the spatial sampling sliding window can be modeled as two contiguous homogeneous clutter fields with the statistical parameters of each field unknown and independent from field to field and with the transition point between fields also not known, then the cell-averaging constant false alarm rate (CFAR) performance significantly degrades, yielding target masking effects and loss of false alarm regulation. For the same defined and encountered environment spanning the sliding window, the performance degradation effects are shown to be largely eliminated when a newly developed class of CFAR tests is employed. These tests are designated as heterogeneous clutter estimating CFARs (HCE-CFAR). The test initially involves the combined use of multiple hypothesis testing and maximum likelihood estimation procedures to estimate the statistical parameters of each of the two fields, and the transition point between them, and then makes use of the relevant estimated clutter field parameters to effect the final decision rule. HCE-CFAR designs are presented for both the cases when the contiguous fields have Rayleigh first-order probability distributions, and log-normal probability distribution. However, the focus of the development and the conducted performance evaluation is for the Rayleigh clutter cases.     

MTI Improvement Factors for Weighted DFTs

The use of the discrete Fourier transform (DFT) to enhance the detection of moving targets in ground clutter is examined. The improvement factor, defined as the signal-to-clutter ratio at the DFT processor output compared with that of the input, is given as a function of normalized clutter spectral width for various weighting functions on the DFT input. The effect of quantization of the weights on the improvement factor is also examined.     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

GLRT subspace detection for range and Doppler distributed targets

A generalized likelihood ratio test (GLRT) is derived for adaptive detection of range and Doppler-distributed targets. The clutter is modeled as a spherically invariant random process (SIRP) and its texture component is range dependent (heterogeneous clutter). We suppose here that the speckle component covariance matrix is known or estimated thanks to a secondary data set. Thus, unknown parameters to be estimated are local texture values, the complex amplitudes and Doppler frequencies of all scattering centers. To do so, we use superresolution methods. The proposed detector assumes a priori knowledge on the spatial distribution of the target and has the precious property of having a constant false alarm rate (CFAR) with the assumption of a known speckle covariance matrix or by the use of frequency agility.     

Validation of windblown radar ground clutter spectral shape

We investigate the robustness of the linear matched filter (MF) operating in a Gaussian environment in the presence of a mismatch between the design clutter-power spectral density (PSD) shape and the actual one. The Gaussian, the power-law (PL), and the double-exponential spectral models have been considered with the goal of investigating which one fits best for windblown foliage. We analyze the MF performance in terms of improvement factor, probability of false alarm, and probability of detection by making use of the theoretical models and measured X-band ground clutter data. The numerical results validate the double-exponential spectral model for windblown foliage by showing that the differences in performance prediction between using measured clutter data and modeled clutter data of various spectral shapes (viz., Gaussian, FL, and double-exponential) are minimized when the spectral model employed is of double-exponential shape     

Studies of target detection algorithms that use polarimetric radardata

Algorithms are described which make use of polarimetric radar information in the detection and discrimination of targets in a ground clutter background. The optimal polarimetric detector (OPD) is derived. This algorithm processes the complete polarization scattering matrix (PSM) and provides the best possible detection performance from polarimetric radar data. Also derived is the best linear polarimetric detector, the polarimetric matched filter (PMF), and the structure of this detector is related to simple polarimetric target types. New polarimetric target and clutter models are described and used to predict the performance of the OPD and the PME. The performance of these algorithms is compared with that of simpler detectors that use only amplitude information to detect targets. The ability to discriminate between target types by exploring differences in polarimetric properties is discussed     

Adaptive Radar Detection in Doubly Nonstationary Autoregressive Doppler Spread Clutter

The problem of adaptive radar detection in clutter which is nonstationary both in slow and fast time is addressed. Nonstationarity within a coherent processing interval (CPI) often precludes target detection because of the masking induced by Doppler spreading of the clutter. Across range bins (i.e., fast time), nonstationarity severely limits the amount of training data available to estimate the noise covariance matrix required for adaptive detection. Such difficult clutter conditions are not uncommon in complex multipath propagation conditions where path lengths can change abruptly in dynamic scenarios. To mitigate nonstationary Doppler spread clutter, an approximation to the generalized likelihood ratio test (GLRT) detector is presented wherein the CPI from the hypothesized target range is used for both clutter estimation and target detection. To overcome the lack of training data, a modified time-varying autoregressive (TVAR) model is assumed for the clutter return. In particular, maximum likelihood (ML) estimates of the TVAR parameters, computed from a single snapshot of data, are used in a GLRT for detecting stationary targets in possibly abruptly nonstationary clutter. The GLRT is compared with three alternative methods including a conceptually simpler ad hoc approach based on extrapolation of quasi-stationary data segments. Detection performance is assessed using simulated targets in both synthetically-generated and real radar clutter. Results suggest the proposed GLRT with TVAR clutter modeling can provide between 5–8 dB improvement in signal-to-clutter plus noise ratio (SCNR) when compared with the conventional methods.     

HRR Detector for Slow-Moving Targets in Sea Clutter

The radar detection of targets in the presence of sea clutter has historically relied upon the radial velocity of targets with respect to the radar platform either by exploiting the relative target Dopplers (for targets with sufficient radial velocity) or by discerning the paths targets traverse from scan to scan. For targets with little to no radial velocity component, though, it can become quite difficult to differentiate targets from the surrounding sea clutter. This paper addresses the detection of slow-moving targets in sea clutter using a high resolution radar (HRR) such that the target has perceptible extent in range. Under the assumption of completely random sea clutter spikes based on an epsiv-contaminated mixture model with the signal and clutter powers known, optimal detection performance results from using the likelihood ratio test (LRT). However, for realistic sea clutter, the clutter spikes tend to be a localized phenomenon. Based upon observations from real radar data measurements, a heuristic approach exploiting a salient aspect of the idealized LRT is developed which is shown to perform well when applied to real measured sea clutter.     

Comparison between monostatic and bistatic antenna configurationsfor STAP

The unique characteristics of bistatic radar operation on the performance of airborne/spaceborne moving target indicator (MTI) radars that use space-time adaptive processing (STAP) are discussed. It has been shown that monostatic STAP radar has the following properties. 1) For a horizontal flight path and a planar Earth the curves of constant clutter Doppler (isodops) are hyperbolas. 2) For a sidelooking antenna geometry the clutter Doppler is range independent. 3) Clutter trajectories in the cosφ-F plane (F=normalized Doppler) are in general ellipses (or straight lines for a sidelooking array). We demonstrate that these well-known properties are distorted by the displacement between transmitter and receiver in a bistatic configuration. It is shown that even for the sidelooking array geometry the clutter Doppler is range-dependent which requires adaptation of the STAP processor for each individual range gate. Conclusions for the design of STAP processors are drawn     

Analysis of CA-CFAR processors for linear-law detection

A method for evaluating the performance of cell-averaging constant false alarm rate (CA-CFAR) processors which use the amplitude of echo signals rather than their squared amplitude is presented. Results for the case of Rayleigh clutter/noise statistics are given. Detection probabilities are evaluated for the case of a Rayleigh fluctuating target embedded in Rayleigh clutter/noise for linear-law CA-CFAR processors. These results are observed to be practically identical to those of square-law CA-CFAR processors for which analytical expressions are readily available. These observations are verified using Monte Carlo simulations. The same conclusion is reached in the case of a nonfluctuating target embedded in Rayleigh clutter/noise for which only simulation results are presented     

一种基于角度-多普勒补偿的均匀圆形天线机载雷达杂波抑制方法

采用均匀圆形相控阵天线的机载雷达杂波分布随距离变化而变化,各距离单元的杂波不再满足独立同分布的条件,造成统计型空时自适应处理(STAP)器性能下降。基于此,本文建立了均匀圆形天线机载雷达模型,对其杂波分布进行了分析,得出了空间角随阵元数非线性变化的特性造成其杂波距离维分布非均匀的结论。研究了一种均匀圆形天线机载雷达杂波抑制方法,该方法先通过修正的角度 多普勒补偿(MADC)预处理消除在杂波谱中心处的非均匀,再利用基于导数更新(DBU)技术进一步减小在其他方位杂波的非均匀程度。仿真结果表明了该方法的有效性。     

A Generalized Clutter Computation Procedure for Airborne Pulse Doppler Radars

A general procedure for analyzing ground clutter effects in airborne pulse Doppler radars is described. The quantity computed is the expected clutter power at the output of any specified range gate/ Doppler filter processing cell. The procedure has been computerized and is quite general with respect to antenna gain pattern, clutter cross section variation, PRF, pulse and range gate shapes, and the various receiver processing functions. It is applicable only to distributed ground clutter and linear processing, and excludes the dynamic effects of continuous antenna scanning. To exemplify the use of the procedure, two studies conducted for a postulated high PRF radar are described, and the results are presented.     

Matched subspace CFAR detection of hovering helicopters

A constant false alarm rate (CFAR) strategy for detecting a Gaussian distributed random signal against correlated non-Gaussian clutter is developed. The proposed algorithm is based on Scharf's matched subspace detector (MSD) and has the CFAR property with respect to the clutter amplitude probability density function (apdf), provided that the clutter distribution belongs to the compound-Gaussian family and the clutter covariance matrix is known to within a scale factor. Analytical expressions of false alarm and detection probabilities are derived. An application to the problem of detecting hovering helicopters against vegetated ground clutter is reported     

Airborne/spacebased radar STAP using a structured covariance matrix

It is shown that partial information about the airborne/spacebased (A/S) clutter covariance matrix (CCM) can be used effectively to significantly enhance the convergence performance of a block-processed space/time adaptive processor (STAP) in a clutter and jamming environment. The partial knowledge of the CCM is based upon the simplified general clutter model (GCM) which has been developed by the airborne radar community. A priori knowledge of parameters which should be readily measurable (but not necessarily accurate) by the radar platform associated with this model is assumed. The GCM generates an assumed CCM. The assumed CCM along with exact knowledge of the thermal noise covariance matrix is used to form a maximum likelihood estimate (MLE) of the unknown interference covariance matrix which is used by the STAP. The new algorithm that employs the a priori clutter and thermal noise covariance information is evaluated using two clutter models: 1) a mismatched GCM, and 2) the high-fidelity Research Laboratory STAP clutter model. For both clutter models, the new algorithm performed significantly better (i.e., converged faster) than the sample matrix inversion (SMI) and fast maximum likelihood (FML) STAP algorithms, the latter of which uses only information about the thermal noise covariance matrix.     

Radar Properties of Non-Rayleigh Sea Clutter

Measurements of sea clutter at low grazing angles using high- resolution radar show that the probability density p(x) of envelope detected sea clutter is not Rayleigh. Using the composite surface scattering model, a special varying clutter density p(x|?0) is proposed and is used to explain the non-Rayleigh nature of clutter. Since the clutter distribution has an enormous effect on the performance of a radar, the variation of the clutter densities, p(x) and p(x|?0), with various radar parameters such as frequency, pulsewidth, and polarization is found. Finally, a simulation of the composite surface scattering model is performed, and it verifies the effect of the various parameters on p(x).