无参考主动Lamb波结构损伤时反成像监测方法

主动Lamb波损伤监测中的差信号方法获取损伤散射信号容易受到结构和环境等外界因素的影响。针对该问题,提出了无参考信号的损伤成像定位和监测方法;研究了回波式压电阵列的布置方法,并设计采用时间反转窗函数,清除Lamb波监测信号中的直接传播信息和边界反射信号,以截取出内部散射信号;通过控制压电阵列布局、设置窗函数等技术条件,基于时间反转理论中对波源的自适应聚焦原理,直接利用当前状态下的传感信号实现对结构损伤的实时成像、定位与评估,不再需要健康信号作为参考。在玻璃纤维复合材料板上的实验结果表明,该方法能较为准确地实时监测出损伤的位置、范围等特征。     

A Lamb wave signal reconstruction method for high-resolution damage imaging

In Lamb wave-based Structural Health Monitoring(SHM), a high-enough spatial resolution is highly required for Lamb wave signals to ensure the resolution and accuracy of damage detection. However, besides the dispersion characteristic, the signal spatial resolution is also largely restricted by the space duration of excitation waveforms, i.e., the Initial Spatial Resolution(ISR)for the signals before travelling. To resolve the problem of inferior signal spatial resolution of Lamb waves, a Lamb Wave Signal Reconstruction(LWSR) method is presented and applied for highresolution damage imaging in this paper. In LWSR, not only a new linearly-dispersive signal is reconstructed from an original Lamb wave signal, but also the group velocity at the central frequency is sufficiently decreased. Then, both dispersion compensation and ISR improvement can be realized to achieve a satisfying signal spatial resolution. After the frequency domain sensing model and spatial resolution of Lamb wave signals are firstly analyzed, the basic idea and numerical realization of LWSR are discussed. Numerical simulations are also implemented to preliminarily validate LWSR. Subsequently, LWSR-based high-resolution damage imaging is developed. An experiment of adjacent multiple damage identification is finally conducted to demonstrate the efficiency of LWSR and LWSR-based imaging methods.     

基于导波传播模型的MUSIC损伤识别算法

针对结构健康监测领域的损伤近场定位问题,提出了适用于复合材料结构损伤识别的近场二维多重信号分类（MUSIC）损伤识别算法。该损伤识别算法将导波传播模型引入近场二维MUSIC损伤识别模型,构造损伤散射信号与实验差信号的互相关矩阵,通过信号子空间与噪声子空间正交特性构造近场二维MUSIC空间谱。通过数值仿真和实验验证了所提出的损伤识别算法能够有效地识别复合材料结构损伤位置信息,具有很高的定位精度和分辨率。针对飞机垂直尾翼的加强筋结构对导波传播特性影响较大的问题,提出了分区域监测的损伤检测策略,并利用基于导波传播模型的二维MUSIC空间谱损伤识别算法成功地识别飞机垂直尾翼结构损伤,实现了复杂复合材料结构损伤识别的工程验证。     

基于声发射的铝蜂窝板超高速撞击损伤模式识别方法

为通过声发射技术识别铝合金蜂窝板超高速撞击(HVI)的损伤状态,提出一种基于神经网络的损伤模式识别方法。通过超高速撞击实验获取声发射信号,结合精确源定位技术、时频分析技术、小波分析技术及模态声发射技术,提出了10个与损伤相关的特征参数,通过非参数检验分析其与损伤的关系,设计了一种基于贝叶斯正则化BP神经网络的超高速撞击损伤模式识别方法。建立最优网络模型,通过不同参数组合识别能力分析,优选出2种特征参数组合,通过非同源样本对其损伤模式识别能力进行验证。结果表明:传播距离与损伤模式无关,却是识别损伤模式的重要参数;125~250kHz频域的自动加窗小波能量比会降低损伤模式的识别能力;采用贝叶斯正则化的BP神经网络可以较好地识别蜂窝板超高速撞击损伤模式,参数组合为传播距离、上升时间、持续时间、截止频率、4个自动加窗小波能量比及小波能量熵,共9个参数,对任意选取非同源样本识别错分率仅为9.38%。     

一种高超声速进气道加速自起动的实验方法

为了探寻在地面常规暂冲式风洞中开展高超声速进气道加速自起动实验的可行性,提出了基于前遮板的高超声速进气道连续变攻角加速自起动实验方法。该实验方法通过将安装有前遮板的进气道模型在风洞实验段整体从极限正攻角旋转至极限负攻角,前遮板会产生激波对远前方气流减速,或产生膨胀波对远前方气流加速,而位于前遮板下游的进气道即可获得加速自起动过程所需连续加速的来流条件。通过数值仿真对所提出的加速自起动实验方法进行了验证。研究结果显示:以2(°)/s的角速度整体旋转基于前遮板的高超声速进气道模型,其起动马赫数与高超声速进气道自身加速自起动马赫数相差在1%以内,表明基于前遮板的高超声速进气道连续变攻角加速自起动实验方法能够被用于在常规暂冲式风洞中开展高超声速进气道加速自起动实验研究。      

C/E复合材料声发射信号小波分析及人工神经网络模式识别

以复合材料为对象，以宽频带传感器及线阵列方式对各类模式试样采集了波形及信号参数，比较波形、信号参数、频谱及小波谱的特征，筛选出六类1300个样本，采用多分辨小波变换提取了5个特征向量，实现了特征空间的降维处理，采用B—P型反向传播神经网络构成了智能化模式分类器，研究了网络模型的学习效果和对与复合材料主要损伤机制有关的六类声发射信号的识别能力。试验结果表明，神经网络对六类信号的平均正确识别率达到90.4%。最佳识别率为97.2%。该方法成功用于90°、0°光滑和0°缺口三种试样的破坏过程分析，获得了满意的效果。     

激波绕射双方块加速诱导爆轰的数值研究

基于二维单步化学反应Euler方程,应用Roe/HLL混合格式以及自适应网格加密(AMR)技术,对方管中弱激波绕射双方块障碍物加速诱导爆轰现象进行了数值研究。计算结果表明,弱激波与双方块相互作用并发生绕射、碰撞可有效加速诱导爆轰,且在管道阻塞比为45%左右时可达到最佳效果,与相关实验结果相符。另外,研究了方块个数及排列方式对激波绕射加速诱导爆轰的影响,得到了最佳方块数量与方块排列方式。     

Preparation of CF/Ni-Fe/CNT/silicone layered rubber for aircraft sealing and electromagnetic interference shielding applications

To meet the needs of preventing information leakage in space engineering and military industry, an efficient method was introduced to obtain layered electromagnetic shielding sealing rubber. The carbon fiber, Ni-Fe coating, and Carbon NanoTube (CNT) were combined by chemical plating and in-situ polymerization to obtain a lightweight (0.14 g/cm²) and thin (1 mm thick) Carbon fiber Fabric (CF)/Ni-Fe/CNT/silicone layered electromagnetic shielding composites. The layered material obtained by adjusting the electroless plating time exhibited a high Shielding Efficiency (SE) of 60.2–85.5 dB in the range of 0–4800 MHz, which can be used for aviation electromagnetic shielding. Carbon fibers and carbon nanotubes mainly attenuated electromagnetic waves through absorption loss, while the nickel-iron alloy coating through reflection loss interacted with the magnetic vector of incident ElectroMagnetic (EM) radiation and magnetic dipoles, therefore, the EM Interference (EMI) shielding composite attenuated EM waves with the “absorption-reflection-absorption” cooperative interaction. Moreover, the flexible fabric substrate adhered with silicone rubber possessed a breaking elongation of 52.3%, which can be utilized as a good sealing material. Simultaneously, the outstanding exothermicity (67.2 °C under the applied voltage of 5 V) makes it possible to be applied in electric heating area. The electromagnetic shielding composites prepared in this paper have good potential in the fields of precision electronic equipment and aviation systems.     

Dynamic characteristics of a cyclic-periodic structure with a piezoelectric network

This paper deals with a cyclic-periodic structure with a piezoelectric network. In such a system, there is not only mechanical connection but also electrical connection between adjacent periodic sectors. The objective is to learn whether the presence of a piezoelectric network would change the dynamic characteristics of the system. The background of the research is about vibration reduction of a bladed disk in an aero-engine, and the system is simulated by a lumped parameter model. The dynamic equations of the system are derived, and then the analytical solution corresponding to the eigenvalue problem is given. The vibration responses to single traveling wave excitations(EO excitations) and multiple traveling wave excitations(NEO excitations) are studied.The results show that the presence of a piezoelectric network would change the natural frequencies of the system compared with those of the system with the piezoelectric shunt circuit. The forced response is sensitive to the connection type and the elements of the network. An energy analysis of the electro-mechanical coupling system has been performed to understand its dynamic behavior,and the following conclusion is obtained: a vibration reduction to excitations whose primary harmonic component is not zero can be achieved by a parallel piezoelectric network, while a reduction to other excitations should be based on a series piezoelectric network.     

失谐周期压电复合材料结构中的波动局部化研究

考虑力电耦合效应的影响,研究了层状失谐周期压电复合材料结构中的波动局部化问题。根据界面上力电连续条件,推导了结构中相邻单胞间的传递矩阵。以力场和电场变量为状态向量,给出了结构中局部化因子的表达式。作为算例,计算了结构中的波动局部化因子。计算结果表明,压电陶瓷的压电效应对周期压电复合材料的波动局部化特性有显著影响,压电常数越大局部化因子值越大,结构的局部化程度越强;结构的失谐度越大,频率通带区间内的局部化因子值越大,局部化程度越强。分析结果对于周期压电复合材料结构的优化设计和振动控制具有理论参考价值。     

Aeroelastic prediction and analysis for a transonic fan rotor with the “hot” blade shape

This paper focuses on aeroelastic prediction and analysis for a transonic fan rotor with only its “hot” (running) blade shape available, which is often the case in practical engineering such as in the design stage. Based on an in-house and well-validated CFD solver and a hybrid structural finite element modeling/modal approach, three main aspects are considered with special emphasis on dealing with the “hot” blade shape. First, static aeroelastic analysis is presented for shape transformation between “cold” (manufacturing) and “hot” blades, and influence of the dynamic variation of “hot” shape on evaluated aerodynamic performance is investigated. Second, implementation of the energy method for flutter prediction is given and both a regularly used fixed “hot” shape and a variable “hot” shape are considered. Through comparison, influence of the dynamic variation of “hot” shape on evaluated aeroelastic stability is also investigated. Third, another common way to predict flutter, time-domain method, is used for the same concerned case, from which the predicted flutter characteristics are compared with those from the energy method. A well-publicized axial-flow transonic fan rotor, Rotor 67, is selected as a typical example, and the corresponding numerical results and discussions are presented in detail.     

SiCp/Al复合材料界面控制与评价新方法

尝试了一种控制 Si Cp/Al复合材料界面状态与性能的新途径 ,并首次应用声发射检测技术及其信号的小波分析新方法对控制效果进行了系统地评价。结果表明 :界面控制新方法的采用 ,使 Si Cp/Al复合材料损伤、断裂过程中的 Si C颗粒拔出模式发生了转变 ,进而显著提高了材料的整体力学性能 ;小波分析特别适合于提取此类复合材料断裂所致声发射信号的深层特征 ,并可望成为反映颗粒增强金属基复合材料界面区力学行为、评价其界面性能的有效手段     

Effects of surface topography and specimen thickness on high-speed raindrop impact damage of CFRP laminates

Raindrop impact erosion has been observed since early days of aviation, and can be catastrophic for exposed materials during supersonic flight. A single impact waterjet apparatus is established for mimicking drop impacts at the velocities between 350 m/s and 620 m/s. Carbon Fiber Reinforced Polymer(CFRP) laminates with three different surface morphologies and specimen thicknesses are tested here. A central region with no visible damage has been noticed, surrounded by a “failure ring” with common...     

Improving accuracy of damage quantification based on two-level consistency control of PZT layers

Structural health monitoring-based quantitative damage diagnosis technique plays a key role in real-time condition monitoring. Among the current research, piezoelectric (PZT) sensor and Guided Wave (GW) based damage quantification methods are promising, which normally establish a calibration model between GW feature and damage degree by experiments on batch specimens, and then conduct the calibration model on the monitored specimen. However, the accuracy of PZT and GW based damage quantification is affected by dispersion introduced by sensor network performance, structural material, and damage propagation among the adopted batch specimens. For improving the accuracy of damage quantification, this paper adopts PZT layer as sensor network and creatively implements theoretical and experimental research on batch PZT layers consistency control. On one hand, a two-level consistency control method based on multidimensional features-Euclidean distance is proposed to ensure the performance consistency of PZT layers placed on different specimens. On the other hand, experimental research on typical aircraft lug structures is also carried out to evaluate the requirement on performance consistency of PZT layers when performing quantitative damage diagnosis, and further verify the proposed two-level consistency control method. Experimental results show that the accuracy of damage quantification raises by 38% when the dispersion of different PZT layers is controlled within 5%.     

复合材料胶接损伤的指数监测方法

为了监测复合材料胶接损伤,基于主动Lamb波和时频分析,提出了一种复合材料损伤监测的指数法。通过对Lamb波信号进行时频分析,提取波形包络。通过计算得到损伤散射信号,选取对损伤敏感的直达波波包,将此波包在结构出现损伤后的能量变化值与损伤前的能量之比作为损伤指示。该方法不用选择特定的Lamb波模式,解决了Lamb波在复合材料结构中存在的频散、多模式及模式转换给信号分析带来的困难。同时在复合材料胶接的损伤演化试验中,对该方法进行了应用验证研究。结果表明:该方法可以用于复合材料胶接损伤的定性和定量分析。     

The Two Sources of Solar Energetic Particles

Evidence for two different physical mechanisms for acceleration of solar energetic particles (SEPs) arose 50 years ago with radio observations of type III bursts, produced by outward streaming electrons, and type II bursts from coronal and interplanetary shock waves. Since that time we have found that the former are related to “impulsive” SEP events from impulsive flares or jets. Here, resonant stochastic acceleration, related to magnetic reconnection involving open field lines, produces not only electrons but 1000-fold enhancements of ³He/⁴He and of (Z>50)/O. Alternatively, in “gradual” SEP events, shock waves, driven out from the Sun by coronal mass ejections (CMEs), more democratically sample ion abundances that are even used to measure the coronal abundances of the elements. Gradual events produce by far the highest SEP intensities near Earth. Sometimes residual impulsive suprathermal ions contribute to the seed population for shock acceleration, complicating the abundance picture, but this process has now been modeled theoretically. Initially, impulsive events define a point source on the Sun, selectively filling few magnetic flux tubes, while gradual events show extensive acceleration that can fill half of the inner heliosphere, beginning when the shock reaches ～2 solar radii. Shock acceleration occurs as ions are scattered back and forth across the shock by resonant Alfvén waves amplified by the accelerated protons themselves as they stream away. These waves also can produce a streaming-limited maximum SEP intensity and plateau region upstream of the shock. Behind the shock lies the large expanse of the “reservoir”, a spatially extensive trapped volume of uniform SEP intensities with invariant energy-spectral shapes where overall intensities decrease with time as the enclosing “magnetic bottle” expands adiabatically. These reservoirs now explain the slow intensity decrease that defines gradual events and was once erroneously attributed solely to slow outward diffusion of the particles. At times the reservoir from one event can contribute its abundances and even its spectra as a seed population for acceleration by a second CME-driven shock wave. Confinement of particles to magnetic flux tubes that thread their source early in events is balanced at late times by slow velocity-dependent migration through a tangled network produced by field-line random walk that is probed by SEPs from both impulsive and gradual events and even by anomalous cosmic rays from the outer heliosphere. As a practical consequence, high-energy protons from gradual SEP events can be a significant radiation hazard to astronauts and equipment in space and to the passengers of high-altitude aircraft flying polar routes.     

碳纤维复合材料层板冲击损伤的空气耦合兰姆波成像检测

非接触式超声兰姆波方法能够对大面积复合材料板材进行快速检测,在自动成像检测上有着突出的优势。针对碳纤维/树脂基复合材料(CFRP)层压板采用空气耦合超声探头激励出A0模态兰姆波。在含冲击损伤的层板试样的同一侧激发和接收兰姆波进行扫描检测,针对冲击损伤区域以互相正交的两个方向进行兰姆波扫查,获得了不同位置的检测信号。对比在有无缺陷处板材中兰姆波传播信号的特征,对采集信号进行频域分析,以无缺陷处信号值为基准,利用信号差异系数(SDC)作为特征值,将扫查信号数据采用特征值全加和全乘的数据融合方法进行了缺陷形貌重构成像。成像结果能够良好的体现出冲击损伤的位置和两个方向的尺寸大小。     

非定常预处理方法在倾转旋翼飞行器悬停状态气动干扰模拟中的应用

针对倾转旋翼飞行器的多种速度尺度并存的复杂流动问题，发展了能够统一求解同时包含不可压缩流动和可压缩流动的非定常预处理方法和一种考虑了流场物理信息传播方向的预处理远场边界条件。结合适用于倾转旋翼飞行器的复杂外形及大位移问题的非结构混合网格技术和重叠插值技术，建立了倾转旋翼飞行器的数值模拟方法。在此基础上，首先通过悬停算例验证了数值方法的有效性，确定了选择预处理截断参数的原则。然后探究了倾转旋翼飞行器直升机模式悬停状态的尾迹涡结构演化过程，研究了“喷泉效应”和“地面效应”对倾转旋翼气动性能的影响。计算结果表明，旋翼尾迹涡的耗散在不同方位角存在较大差异。“地面效应”抑制了旋翼尾迹的发展，提高了旋翼整个方位角区域的升力系数，而不仅限于机翼上方方位角区域。 “地面效应”作用强于“喷泉效应”作用，使旋翼相对于孤立旋翼拉力系数略微增大了5.26%，但同时整个倾转旋翼飞行器的总的向上的力只有孤立旋翼拉力的82.46%。结论表明预处理方法和预处理远场边界条件能够较好地模拟倾转旋翼飞行器悬停状态的干扰流场，兼顾了数值计算的耗散性和稳定性。气动干扰对倾转旋翼飞行器整体气动性能有重大影响。      

随机载荷谱下基于声发射的耳片接头疲劳裂纹识别方法

作为航空结构中传递集中载荷的关键部件,耳片接头的失效将会带来灾难性的后果,因此需要通过疲劳试验来验证其是否满足设计要求。声发射（AE）作为一种在线监测手段,能够及时捕捉接头裂纹萌生扩展进程,提升试验质量。然而,在随机载荷谱下,会产生大量极其复杂且毫无规律的声发射信号,致使传统的基于特征提取及参数滤波的声发射数据分析方法难以发挥作用,无法有效识别接头裂纹的萌生。因此,本文提出了一种随机载荷谱下疲劳裂纹的声发射识别方法,该方法利用随机载荷谱的分布特点,通过分析不同载荷谱块下相同循环时段所对应的声发射信号表象差异来发现、锁定异常,并结合定位分析与干扰排除分析,确定裂纹的发生时间及位置。通过疲劳试验,该方法的有效性得到了证实,因而可为随机载荷谱下的相关航空结构试验提供参考。     

A Passive Method to Control Combustion Instabilities with Perforated Liner

 The effectiveness of perforated liner with bias flow on the control of combustion instability is investigated. Combustion in-stabilities result from the coupling between acoustic waves and unsteady combustion heat release. Sometimes the phenomenon happens in afterburners of aeroengine and rocket engine, and it always causes damage to flame holders, liner sections and other engine components. Passive methods, such as perforated liner, are often used to suppress such instabilities in application. In this article, first, a burner testbed is built in order to study the characteristic of this phenomenon. The unstable frequencies and unstable area are investigated experimentally. Then an analytical model, based on “transfer element method”, is developed and the numerical results are compared with those from experiments. At last the perforated liner is applied to the burner to sup-press the instabilities. The results show that the sound pressure can be greatly reduced by the perforated liner.