Lognormal杂波环境中基于Hough变换的目标检测

给出了基于Hough变换的信号检测结构,推导了Lognormal分布杂波背景下基于Hough 变换检测器的检测性能的解析表达式,设计了具体的仿真环境和仿真流程,对基于Hough变换检测器在非起伏目标和四种Swerling起伏环境下的目标检测性能进行了分析。     

基于点集合并的修正Hough变换TBD算法

在低信噪比条件下,基于Hough变换的检测前跟踪算法是进行强杂波背景下目标航迹检测的一种手段。本文针对Hough变换后一个目标产生多条可能航迹以及航迹内可能存在杂波点的问题,提出了一种基于能量最大点和点集合并的修正Hough变换检测前跟踪算法。该算法利用量测点时序、能量信息及目标速度先验信息对Hough变换后点迹进行关联和剔除,能够有效的对目标原始航迹进行回溯。针对高斯噪声背景下的飞行目标,仿真结果表明该算法能够对微弱目标进行有效检测,在目标数目、杂波密度、信噪比发生变化的条件下仍能保持较高的检测概率。     

复合高斯杂波中距离扩展目标的迭代近似GLRT检测器

 研究了结构化的复合高斯杂波(CGC)背景中距离扩展目标自适应检测问题。针对异质杂波背景中的近似广义似然比检验(AGLRT-HTG)检测器应用于CGC背景中时存在一定的信杂比损失问题,结构化的复合高斯杂波采用自回归过程建模,结合近似广义似然比检验(AGLRT)方法和迭代估计思想,提出了CGC背景中距离扩展目标的迭代近似广义似然比检测器(RAGLRT-CGC)。从理论上分析了极限情况下RAGLRT-CGC虚警概率与检测门限关系的解析表达式。仿真结果表明,在CGC背景中,RAGLRT-CGC对不同多主散射点目标具有较好的鲁棒性,并且检测性能明显优于AGLRT-HTG。     

区域杂波估计的多目标跟踪方法

高斯粒子概率假设密度（PHD）滤波往往假定杂波密度参数已知,这种做法对于实际应用是不现实的。此外,杂波的参数值通常依赖于环境条件,可能随时间发生变化。因此,多目标跟踪算法中需要实时准确估计杂波密度的参数。基于此,提出了一种多目标跟踪的区域杂波估计方法。首先根据量测信息在线估计出场景中的杂波数目,然后估计落入目标附近感兴趣区域的杂波数,并估计每个目标感兴趣区域杂波强度。仿真结果表明,在复杂场景下算法的跟踪性能明显优于未进行杂波估计的多目标跟踪算法,提高了跟踪的实时性和跟踪精度。     

基于非线性自适应滤波器的海杂波抑制技术

海杂波会严重影响雷达对海洋表面目标的检测。为了提高海洋表面目标的检测性能,基于非线性自适应滤波器,提出了海杂波抑制方法,实现了海杂波抑制。介绍了非线性自适应滤波器的原理以及利用梯度下降法训练滤波器的方法。利用IPIX雷达实测海杂波数据,分别针对岸基雷达和机载雷达,进行了此方法的仿真试验,从均方预测误差(MSE)和信杂比改善因子(IF)两个方面,分析了此方法的性能。并与基于线性预测的LMS算法进行了比较,得出了此方法对慢速目标的检测性能优于线性方法。     

三种两样本非参量CFAR检测算法分析

介绍了3种两样本非参量CFAR检测算法的基本工作原理,利用实测未知统计概率分布海杂波数据对它们的检测性能进行了研究,并与参量CA-CFAR检测器进行了对比.研究表明:在强海杂波条件下,GS-CFAR检测器的检测性能最优;在弱海杂波条件下,Savage-CFAR检测器的检测性能最优;相比于CA-CFAR检测器,3种两样本...     

海杂波谱的机理及时变特性分析

针对海杂波背景下目标检测问题的实际需求,在机理分析的基础上,利用实测数据对海杂波谱的时变特性进行了分析。首先,分析了波束照射区域内由海表面波浪运动引起的多普勒频移和展宽现象,以及随雷达工作参数之间的依赖关系;然后,对已有海杂波谱机理研究结果进行了分析和总结。在此基础上,利用加窗的周期图法估计得到海杂波的时间-多普勒谱,进而从相关时间的统计特性、谱宽与时域海杂波拖尾程度的依赖关系两个层面对海杂波谱的时变特性进行了分析。分析结果可为海杂波谱建模、海杂波抑制及目标检测方法设计提供理论指导。     

高海况条件下海面漂浮小目标特征提取与分析

在高海况条件下,海面小目标回波信杂比很低,且在海浪影响下,小目标姿态变化引起的能量起伏严重,以能量为主导的目标检测方法具有较大的性能损失。从不同表示域提取小目标与海杂波差异特征,并进行特征检测是解决该问题的有效途径。以此为背景,通过开展海面小目标数据采集试验,分别从时域、频域、时频域、时频脊变换域进行特征提取与可分性分析,在 4个表示域共提取出 10个特征,包括时域相对平均幅度(RelativeAverageAm-plitude,RAA)、频域相对多普勒向量熵(RelativeVectorEntropy,RVE)、时频脊累积量(RidgeIntegration,RI)等,通过分析得到了 4级海况条件下不同特征可分性程度的结论,为后续多特征融合以及多维特征目标检测工作提供支撑。     

基于背景杂波估计的飞机目标探测波段选择方法

针对空中目标的探测与隐身对抗问题,提出了一种新的基于背景杂波估计的目标探测波段选择方法,基于光线追迹的计算机图形渲染技术,建立地球表面背景-大气-飞机目标耦合辐射模型,采用POE杂波尺度,基于信杂比(SCR)模型确定探测波段的选择宽度。将所选择的探测波段应用于飞机顶视探测,仿真结果显示基于背景杂波估计的目标探测波段选择方法能有效增加探测波段宽度,从而提高探测性能。     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

基于导航雷达实测数据的CFAR检测算法分析

为提高导航雷达在复杂环境中的目标检测能力,研究了修正中值(MMD)检测器在导航雷达中的应用,并与经典非参量广义符号(GS)检测器和参量最小选择(SO)检测器的检测结果进行对比。仿真结果表明:GS检测器对海上单一目标有较好的检测性能,但是在多目标环境下的检测性能严重下降;SO检测器虽然对上述环境有较好的检测性能,但是由于杂波包络分布类型难以准确已知,杂波抑制能力较差;MMD检测器在多目标环境下有较好的检测性能和杂波抑制能力。     

Nonparametric rank detectors under K-distributed clutter in radar applications

This correspondence deals with a comparative analysis of parametric detectors versus rank ones for radar applications, under K-distributed clutter and nonfluctuating and Swerling II target models. We show that the locally optimum detectors (LODs) (optimum for very low signal-to-clutter ratio (SCR)) under K-distributed clutter are not practical detectors; on the contrary, asymptotically optimum detectors (optimum for high SCR) are the practical ones. The performance analysis of the parametric log-detector and the nonparametric (linear rank) detector is carried out for independent and identically distributed (IID) clutter samples, correlated clutter samples, and nonhomogeneous clutter samples. Some results of Monte Carlo simulations for detection probability (P/sub d/) versus SCR are presented in curves for different detector parameter values.     

非相干Rice杂波中的恒虚警检测

 地杂波的统计特性常常可以用Rice模型来描述,其物理基础是认为地杂波由一些大的固定散射体引起的稳定分量和大量小的随机分布的运动散射体引起的瑞利起伏分量所合成。文献[2]研究了稳定分量不相干时Rice杂波中离散时间最佳检测的估值器——相关器结构,但无显式解,实现有困难。文献[3]导出了Rice杂波中SwerlingⅡ目标的离散时间检测的似然比检测器结构。在此基础上,本文给出了一种修正平方律结构的似然比检测器,并和通常的平方律检测器作了性能比较。     

Optimal CFAR detection in Weibull clutter

Optimal, in the maximum likelihood sense, constant false-alarm rate (CFAR) detection for Weibull clutter statistics, is investigated. The proposed OW (optimal Weibull) estimator is proved to be an asymptotically efficient estimator of the mean power of the Weibull clutter. Theoretical analysis of the OW-CFAR detector is provided, while detection performance analysis is carried out using the Monte Carlo simulation method. The operation of the median and morphological (MEMO)-CFAR detector in Weibull clutter statistics is also explained. It performs almost optimally in uniform clutter and, simultaneously, it is robust in multitarget situations. The performance of the proposed OW-CFAR detector in uniformal Weibull clutter is used as a yardstick in the analysis of the MEMO cell-averager (CA) and ordered statistic (OS) CFAR detectors. Nonfluctuating and fluctuating (Swerling II) targets are considered in detection analysis. The performance of the detectors is also examined at clutter edges     

OS-CFAR theory for multiple targets and nonuniform clutter

The performance of a cell averaging constant false-alarm rate (CA-CFAR) detector degrades rapidly in nonideal conditions caused by multiple targets and nonuniform clutter. The ordered-statistic CFAR (OS-CFAR) is an alternative to the CA-CFAR. The OS-CFAR trades a small loss in detection performance relative to the CA-CFAR in ideal conditions for much less performance degradation in nonideal conditions. A formula is given for the detection probability of the OS-CFAR when there are multiple Swerling I targets in the CFAR window, and a formula is given for the probability of false alarm in nonuniform Raleigh clutter     

Performance of max-mean level detector with and without censoring

The maximum-mean-level detector (MX-MLD) is a constant false-alarm rate (CFAR) detector designed to eliminate the excessively high false-alarm rate seen with the MLD at the edges of contiguous clutter regions. The concomitant high target suppression effect led M. Weiss (1982) to suggest a censored modification. The authors analyze the detection performance of the maximum-censored-mean-level detector (MX-CMLD). A homogeneous Swerling II target and clutter environment are assumed, and only single-pulse detection is considered. Analytic results apply equally to the MX-MLD and extend previous analysis. Simulation results are presented that demonstrate the qualitative effects of various CFAR detectors in nonhomogeneous clutter environments     

Detection Performance of Logarithmic Receivers Employing Video Integrators

The detection performance of logarithmic receivers in Rayleigh and non-Gaussian clutter is investigated. In Rayleigh clutter the performance is determined for steady, Swerling case 1, and Swerling case 2 targets. The detection loss of logarithmic receivers is generally less than the ? log n loss conjectured by Green, but consistent with the 1.08-dB asymptotic loss established by Hansen. The Swerling case 2 loss, important in frequency- agility applications, canbe severe for a small number of integrated pulses and high Pd, and apparently approaches the 1.08-dB asymptotic loss as a lower bound. Graphs of GramCharlier series cumulants are provided to allow determination of logarithmic-receiver performance. Curves are presented to allow the detection performance of logarithmic receivers in log-normal and Weibull clutter to be determineds.     

Performance analysis of linearly combined order statistic CFARdetectors

Linearly combined order statistic (LCOS) constant false-alarm rate (CFAR) detectors are examined for efficient and robust threshold estimation applied to exponentially distributed background observations for improved detection. Two optimization philosophies have been employed to determine the weighting coefficients of the order statistics. The first method optimizes the coefficients to obtain efficient estimates of clutter referred to the censored maximum likelihood (CML) and best linear unbiased (BLU) CFAR detectors. The second optimization involves maximizing the probability of detection under Swerling II targets and is referred to as the most powerful linear (MPL) CFAR detector. The BLU-CFAR detector assumes no knowledge of the target distribution in contrast to the MPL-CFAR detector which requires partial knowledge of the target distribution. The design of these CFAR detectors and the probability of detection performance are mathematically analyzed for background observations having homogeneous and heterogeneous distributions wherein the trade-offs between robustness and detection performance are illustrated     

Performance Analysis of the Censored Mean-Level Detector

The censored mean-level detector (CMLD) is an alternative to the mean-level detector that achieves robust detection performance in a multiple-target environment by censoring several of the largest samples of the maximum likelihood estimate of the background noise level. Here we derive exact expressions for the probability of detection of the CMLD in a multiple-target environment when a fixed number of Swerling II targets are present. The primary target is modeled by Swerling case II, and only single-pulse processing is analyzed. Optimization of the CMLD parameters is considered, and a comparison to other detectors is presented.     

Adaptive Detection Algorithms for Multiple-Target Situations

The performance of a mean-level detector is considered for the case where one or more interfering target returns are present in the set of cells used in estimating the clutter-plus-noise level. A serious degradation of detection probability is demonstrated for all of the single-pulse Swerling target fluctuation models (i. e., cases 0, 2, and 4). Indeed, for fixed mean radar cross sections of the primary and interfering targets, the probability of detecting the primary target is asymptotic to values significantly less than unity as the signal-to-noise ratios of the returns approach infinity. A class of alternative adaptive detection procedures is proposed and analyzed. These procedures, based on ranking and censoring techniques, maintain acceptable performance in the presence of interfering targets, and require only a minor addition in hardware to a conventional mean-level detector.