Foliage attenuation and backscatter analysis of SAR imagery

The ability of a synthetic aperture radar (SAR) to detect targets under foliage is in part determined by the attenuation suffered by radiation propagating through the foliage and the backscatter from the foliage. MIT Lincoln Laboratory made measurements of foliage attenuation and backscatter using the NASA/JPL-UHF, L-, C-band fully-polarimetric SAR in July 1990. In this experiment, a 48 km² forested area near Portage, Maine was imaged. Twenty-seven 8 ft trihedral corner reflectors were arrayed throughout the imaged area in order to measure foliage attenuation. Ground truth was recorded at the time of the experiment in order to correlate the attenuation and backscatter results with foliage biophysical properties. The probability densities for foliage attenuation and for backscatter are determined as functions of frequency, polarization, and depression angle     

Optimal speckle reduction in polarimetric SAR imagery

Speckle is a major cause of degradation in synthetic aperture radar (SAR) imagery. With the availability of fully polarimetric SAR data, it is possible to use the three complex elements (HH, HV, VV) of the polarimetric scattering matrix to reduce speckle. The optimal method for combining the elements of the scattering matrix to minimize image speckle is derived, and the solution is shown to be a polarimetric whitening filter (PWF). A simulation of spatially correlated, K-distributed, fully polarimetric clutter is then used to compare the PWF with other, suboptimal speckle-reduction methods. Target detection performance of the PWF, span, and single-channel |HH|² detectors is compared with that of the optimal polarimetric detector (OPD). A novel, constant-false-alarm-rate (CFAR) detector (the adaptive PWF) is as a simple alternative to the OPD for detecting targets in clutter. This algorithm estimates the polarization covariance of the clutter, uses the covariance to construct the minimum-speckle image, and then tests for the presence of a target. An exact theoretical analysis of the adaptive PWF is presented; the algorithm is shown to have detection performance comparable with that of the OPD     

A multiresolution approach to discrimination in SAR imagery

We develop and test a new algorithm for discriminating man-made objects from natural clutter in synthetic-aperture radar (SAR) imagery. This algorithm exploits characteristic variations in speckle pattern as image resolution is varied from course to fine. We model these variations as an autoregression in scale, and then use the autoregressive model to define a multiresolution log-likelihood ratio discriminant. We incorporate this discriminant into the existing Lincoln Laboratory SAR system for automatic target recognition (ATR), and test the augmented system by applying it to millimeter-wave SAR imagery having 0.3 m resolution and representing 56 square kilometers of terrain. At a probability of detection of 0.95, the addition of the multiresolution discriminant reduces the number of natural-clutter false alarms by a factor of six.     

基于MAP估计和广义高斯分布的SAR图像边缘比率检测方法

 合成孔径雷达(SAR)图像的低信噪比和乘性相干斑噪声给SAR图像的边缘检测带来了极大的困难.通过引入广义高斯(GG)分布作为局部均值功率的先验分布模型,给出了局部均值功率在最大后验概率(MAP)意义下的最优估计,进而提出一种新的SAR图像边缘比率检测算子.利用以梅林变换为基础的对数累积量(MoLC)方法估计GG分布的参数,在此基础上给出一种局部均值功率MAP估计和GG分布参数估计的联合迭代求解方法.利用SAR实测数据对本文提出的边缘检测算子进行仿真验证,并将其与平均比率(RoA)算子和指数加权均值比(ROEWA)算子进行了对比,结果表明该算子可以有效克服相干斑噪声的影响,边缘定位准确且虚假边缘明显减少.     

Optimal polarimetric processing for enhanced target detection

The results of a study of several polarimetric target detection algorithms are summarized. The algorithms were tested using real target-in-clutter data collected by the Lincoln Laboratory 35 GHz synthetic aperture radar (SAR) sensor. Fully polarimetric measurements (HH, HV, VV) are processed into intensity imagery using adaptive and nonadaptive polarimetric whitening filters (PWFs). Then a two-parameter constant false alarm rate (CFAR) detector is run over the imagery to detect the targets. Nonadaptive PWF processed imagery is shown to provide better protection performance than either adaptive PWF processed imagery or single-polarimetric-channel HH imagery. In addition, nonadaptive PWF processed imagery is shown to be visually clearer than adaptive processed imagery     

基于迁移学习的SAR目标超分辨重建

针对合成孔径雷达(SAR)目标超分辨重建问题,提出了一种基于迁移学习的超分辨方法。在光学图像梯度域中联合训练超完备字典与稀疏编码映射,利用半耦合字典联系SAR图像与光学图像,寻找SAR图像在半耦合字典下的稀疏编码,并在高分辨率字典下完成重建。结合SAR图像的先验信息,使用正则化方法对SAR目标进行特征增强。所提方法在TerraSAR-X数据和MSTAR数据上进行了仿真实验,重建结果表明,相比目前的插值方法和稀疏表示方法,所提方法空间分辨率可提高0.5~1.5个像素。正则化增强结果表明,引入稀疏先验的正则化增强能够进一步提高空间分辨率并抑制杂波比,最后分析了正则化参数的选取对图像质量的影响。     

VSAR: a high resolution radar system for ocean imaging

The velocity synthetic aperture radar (VSAR) is a conceptual synthetic aperture radar (SAR)-based sensor system for high resolution ocean imaging. The VSAR utilizes data collected by a multielement SAR system, to extract information not only about the radar reflectivity of the observed area, but also about the radial velocity of the scatterers in each pixel. This is accomplished by making use of the phase information contained in multiple SAR images, and not just the magnitude information as in conventional SAR. Using this velocity information, the VSAR attempts to compensate for the velocity distortion inherent in conventional SAR and to reconstruct the ocean reflectivity. We present the basic theory of the VSAR system and its performance. We also provide an analysis of the VSAR imaging mechanism for a statistical model of the radar returns, designed to capture the effects of speckle and of resolution degradation due to the decorrelation of the radar returns     

Analysis of foliage-induced synthetic pattern distortions

Phase and amplitude fluctuations induced by wave propagation through foliage limit the ability of a synthetic aperture radar (SAR) system to image a target under foliage. One-way measurements of these fluctuations were done at C-, L-, UHF band during the July 1990 Foliage Penetration Experiment using single frequency CW signal sources and the NASA/JPL SAR receiver. The phase and amplitude data are coherently integrated to create the synthetic azimuthal patterns that would result when attempting to image a point target obscured by foliage. The effect of synthetic aperture length frequency, and polarization on the attenuation and azimuthal response of foliage obscured targets is investigated     

Foliage penetration experiment

This series papers describes analyses of a foliage penetration experiment undertaken by MIT Lincoln Laboratory to assess the ability of synthetic aperture radar (SAR) to detect targets under trees. Data were taken using the NASA/JPL UHF, L-, C-band fully polarimetric SAR over a forested area in Maine in July 1990. Future experiments are planned to measure the polarimetric properties of clutter and targets using the latest ultrawideband sensors with submeter resolutions and fully polarimetric data collection capabilities     

Automatic target recognition using enhanced resolution SAR data

Using advanced technology, a new automatic target recognition (ATR) system has been developed that provides significantly improved target recognition performance compared with ATR systems that use conventional synthetic aperture radar (SAR) image-processing techniques. This significant improvement in target recognition performance is achieved by using a new superresolution image-processing technique that enhances SAR image resolution (and image quality) prior to performing target recognition. A computationally efficient two-level implementation of a template-based classifier is used to perform target recognition. The improvement in target recognition performance achieved using superresolution image processing in this new ATR system is quantified     

Modeling and a Correlation Algorithm for Spaceborne SAR Signals

A mathematical model of a spaceborne synthetic aperture radar (SAR) response is presented. The associated SAR system performance, in terms of the resolution capability, is also discussed. The analysis of spaceborne SAR target response indicates that the SAR correlation problem is a two-dimensional one with a linear shift-variant response function. A new digital processing algorithm is proposed here in order to realize an economical digital SAR correlation system. The proposed algorithm treats the two-dimensional correlation by a combination of frequency domain fast correlation in the azimuth dimension and a time-domain convolver type of operation in the range dimension. Finally, digitally correlated SEASAT satellite SAR imagery is used in an exemplary sense to validate the SAR response model and the new digital processing technique developed.     

方位扫描SAR区域成像研究

研究在SAR区域成像中,通过天线波束方位扫描扩大成像区方位宽度的机理以及信号处理方法。首先描述天线波束扫描的几何关系,推导出为达到要求的成像分辨率以及成像区方位宽度所需的天线波束扫描角速度和扫描角度的计算公式。分析了成像区位置与载机航迹的几何关系。然后讨论方位扫描SAR区域成像信号处理方法,并给出系统点目标响应仿真结果。最后,用试飞实测数据成像做了验证。     

Bayesian edge detector for SAR imagery using discontinuity-adaptive Markov random feld modeling

Synthetic aperture radar（SAR）image is severely affected by multiplicative speckle noise,which greatly complicates the edge detection.In this paper,by incorporating the discontinuityadaptive Markov random feld（DAMRF）and maximum a posteriori（MAP）estimation criterion into edge detection,a Bayesian edge detector for SAR imagery is accordingly developed.In the proposed detector,the DAMRF is used as the a priori distribution of the local mean reflectivity,and a maximum a posteriori estimation of it is thus obtained by maximizing the posteriori energy using gradient-descent method.Four normalized ratios constructed in different directions are computed,based on which two edge strength maps（ESMs）are formed.The fnal edge detection result is achieved by fusing the results of two thresholded ESMs.The experimental results with synthetic and real SAR images show that the proposed detector could effciently detect edges in SAR images,and achieve better performance than two popular detectors in terms of Pratt＇s fgure of merit and visual evaluation in most cases.     

结合视线方向运动补偿的滑动聚束SAR子孔径成像算法

滑动聚束合成孔径雷达(SAR)是一种新兴的成像模式,既可以提高方位向分辨率又能够扩展成像范围。其数据处理时需要考虑两个关键问题:一是系统脉冲重复频率(PRF)不足,方位向信号发生混叠;二是合成孔径长度的增加使运动误差的影响更为突出,运动补偿(MOCO)精度要求提高。基于子孔径技术,提出了一种改进的高分辨率成像算法。划分子孔径克服了PRF不足的问题;子孔径数据处理采用结合视线(LOS)方向运动补偿的Omega-K算法,实现更高精度的运动补偿,提高了聚焦质量。最终的方位向分辨率达到0.1 m,具有实际工程应用价值。点目标仿真和实测数据处理验证了算法的有效性。     

保持弱细结构特征的SAR图象模拟退火重构方法

模拟退火 ( SA)算法最先由 White R G.用于合成孔径雷达 ( SAR)图象的降斑处理。该算法在重构均匀区域和强结构区效果有很大提高 ,但也有缺点 ,尤其是过分模糊弱细结构。本文提出了一种改进的方法 ,在 SA算法中融入了边沿检测和增强步骤 ,使弱细结构得以增强并在退火过程中保持。为配合此方法 ,采用平稳下降的指数温度规划取代对数形式。通过仔细调整算法过程 ,可使新方法保留 SAR图象中的很多细小结构 ,而不使其他均匀的和强结构场景性能恶化 ,同时也没有引入其他缺陷。改进的算法更加适于中、低分辨率的 SAR图象降斑处理     

基于塔形形态算法的SAR图像相干斑抑制

提出将塔形形态算法用于抑制SAR图像中相干斑处理，为减少塔形处理中由于下采样造成的信息损失，从并行处理的角度出发，对塔形形态滤波器提出了改进，将下采样中的各子图同时进行形态滤波处理，在上采样中将各子图合并。经分析和处理表明这两种算法用于SAR图像滤波都能有效地去除相干斑噪声。与塔形形态滤波、Lee滤波器算法比较，采用并行算法处理后图像的各项指标有明显的改善。     

基于数值计算的机载SAR空变运动补偿算法

针对机载合成孔径雷达(SAR)高分辨率宽测绘带(HRWS)成像问题,在分析结合两步运动误差补偿的距离徙动算法基础上,提出一种基于数值计算的空变运动误差补偿算法。通过对粗聚焦图像进行分块,在子块的两维波数域进行空变运动补偿,补偿的相位包括方位相位误差、距离相位误差以及方位和距离的耦合相位,因此该算法在复杂航迹、高分辨和宽测绘带情况下仍具有较好的鲁棒性。最后对SAR仿真数据和实测数据进行处理,并与结合两步运动误差补偿的距离徙动算法进行比较,处理结果表明该算法能够更好地补偿空变运动误差。     

一种基于高阶统计量的SAR图像自聚焦算法

 提出了一种基于高阶统计量分析的相位误差估计算法,用于SAR 图像自聚焦。该算法从复图像域出发,通过循环移位及加窗处理孤立强点目标,利用高阶累积量对高斯噪声的抑制能力,在距离压缩相位历史域估计相位误差。由于避免了对加性噪声及干扰很敏感的差分运算,相位误差的估计结果有很好的鲁棒性。仿真及实测数据的处理结果证明了该算法的可行性。     

A Generalized Approach to Multiresolution Complex SAR Signal Processing

Multiresolution synthetic aperture radar (SAR) image formation has been proven to be beneficial in a variety of applications such as improved imaging and target detection as well as speckle reduction. SAR signal processing traditionally carried out in the Fourier domain has inherent limitations in the context of image formation at hierarchical scales. We present a generalized approach to the formation of multiresolution SAR images using biorthogonal shift-invariant discrete wavelet transform (SIDWT) in both range and azimuth directions. Particularly in azimuth, the inherent subband decomposition property of wavelet packet transform is introduced to produce multiscale complex matched filtering without involving any approximations. This generalized approach also includes the formulation of multilook processing within the discrete wavelet transform (DWT) paradigm. The efficiency of the algorithm in parallel form of execution to generate hierarchical scale SAR images is shown. Analytical results and sample imagery of diffuse backscatter are presented to validate the method.     

SAR ATR performance using a conditionally Gaussian model

A family of conditionally Gaussian signal models for synthetic aperture radar (SAR) imagery is presented, extending a related class of models developed for high resolution radar range profiles. This signal model is robust with respect to the variations of the complex-valued radar signals due to the coherent combination of returns from scatterers as those scatterers move through relative distances on the order of a wavelength of the transmitted signal (target speckle). The target type and the relative orientations of the sensor, target, and ground plane parameterize the conditionally Gaussian model. Based upon this model, algorithms to jointly estimate both the target type and pose are developed. Performance results for both target pose estimation and target recognition are presented for publicly released data from the MSTAR program