微动目标跟踪成像一体化的雷达资源优化调度算法

相控阵雷达可以同时担负搜索、跟踪、识别与成像等多种雷达任务。为了提高雷达对战场环境的感知能力并减轻雷达资源分配的冲突,提出一种微动目标跟踪成像一体化的雷达资源优化调度算法。该算法建立了包含微动目标成像任务的雷达优化调度模型并利用启发式算法求解,利用跟踪脉冲与调度剩余的空闲时间资源,动态地构造感知矩阵并采用正交匹配追踪（OMP）算法对微动目标进行特征提取并成像。仿真结果表明：该算法可以实现稀疏孔径条件下的微动目标成像,并具有良好的鲁棒性,同时进一步提高了雷达系统的资源利用率。     

Power tracking for nonlinear PV sources with coupled inductor SEPIC converter

The photovoltaic (PV) generator exhibits a nonlinear i-v characteristic and its maximum power (MP) point varies with solar insolation. In this paper, a V2-based MP point tracking (MPPT) scheme is developed using a buck-boost transformation topology. Although several buck-boost transformation topologies are available we have considered here a coupled inductor SEPIC converter for experimentation. To achieve almost ripple-free array current we have used ripple steering phenomena with the help of integrated inductor. This integrated inductor not only reduces the magnetic core requirements but also improves converter performance. Mathematical models are formulated and tracking algorithm is evolved. A combined PV system simulation model is developed in the SIMULINK. For a given solar insolation, the tracking algorithm changes the duty ratio of the converter such that the solar cell array (SCA) voltage equals the voltage corresponding to the MP point. This is done by the tracking algorithm, which mainly computes the power proportional to square of terminal voltage and changes the duty ratio of the converter so that this power is maximum. The proposed algorithm is implemented in real-time with the help of Analog Device ADMC-401 DSP evaluation module. The tracking program is developed to perform experimental investigations using analog-to-digital converter (ADC) interrupt. Using this processor we are able to track the MP within 200 ms. The proposed peak power tracking effectiveness is demonstrated through simulation and experimental results.     

Loopy belief propagation based data association for extended target tracking

The data association problem of multiple extended target tracking is very challenging because each target may generate multiple measurements. Recently, the belief propagation based multiple target tracking algorithms with high efficiency have been a research focus. Different from the belief propagation based Extended Target tracking based on Belief Propagation (ET-BP) algorithm proposed in our previous work, a new graphical model formulation of data association for multiple extended target tracking is proposed in this paper. The proposed formulation can be solved by the Loopy Belief Propagation (LBP) algorithm. Furthermore, the simplified measurement set in the ET-BP algorithm is modified to improve tracking accuracy. Finally, experiment results show that the proposed algorithm has better performance than the ET-BP and joint probabilistic data association based on the simplified measurement set algorithms in terms of accuracy and efficiency. Additionally, the convergence of the proposed algorithm is verified in the simulations.     

Efficient multisensor fusion using multidimensional dataassociation

We present the development of a multisensor fusion algorithm using multidimensional data association for multitarget tracking. The work is motivated by a large scale surveillance problem, where observations from multiple asynchronous sensors with time-varying sampling intervals (electronically scanned array (ESA) radars) are used for centralized fusion. The combination of multisensor fusion with multidimensional assignment is done so as to maximize the “time-depth” in addition to “sensor-width” for the number S of lists handled by the assignment algorithm. The standard procedure, which associates measurements from the most recently arrived S-1 frames to established tracks, can have, in the case of S sensors, a time-depth of zero. A new technique, which guarantees maximum effectiveness for an S-dimensional data association (S⩾3), i.e., maximum time-depth (S-1) for each sensor without sacrificing the fusion across sensors, is presented. Using a sliding window technique (of length S), the estimates are updated after each frame of measurements. The algorithm provides a systematic approach to automatic track formation, maintenance, and termination for multitarget tracking using multisensor fusion with multidimensional assignment for data association. Estimation results are presented for simulated data for a large scale air-to-ground target tracking problem     

MPPT of photovoltaic systems using extremum - seeking control

A stability analysis for a maximum power point tracking (MPPT) scheme based on extremum-seeking control is developed for a photovoltaic (PV) array supplying a dc-to-dc switching converter. The global stability of the extremum-seeking algorithm is demonstrated by means of Lyapunov's approach. Subsequently, the algorithm is applied to an MPPT system based on the "perturb and observe" method. The steady-state behavior of the PV system with MPPT control is characterized by a stable oscillation around the maximum power point. The tracking algorithm leads the array coordinates to the maximum power point by increasing or decreasing linearly with time the array voltage. Off-line measurements are not required by the control law, which is implemented by means of an analog multiplier, standard operational amplifiers, a flip-flop circuit and a pulsewidth modulator. The effectiveness of the proposed MPPT scheme is demonstrated experimentally under different operating conditions.     

Array shape estimation tracking using active sonar reverberation

This paper concerns the problem of array shape estimation and tracking for towed active sonar arrays, using received reverberation returns from a single transmitted CW pulse. Uniform linear arrays (ULAs) deviate from their nominal geometry while being towed due to ship maneuvers as well as ocean currents. In such scenarios, conventional beamforming performed under the assumption of a ULA can sometimes lead to unacceptably high spatial sidelobes. The reverberation leaking through the sidelobes can potentially mask weak targets in Doppler, especially when the target Doppler is close to that of the mainlobe reverberation and the reverberation-to-target ratio (RTR) is very high. Although heading sensors located along the array can be used to provide shape estimates, they may not be sufficiently available or accurate to provide the required sidelobe levels. We propose an array shape calibration algorithm using multipath reverberation returns from each ping as a distributed source of opportunity. More specifically, a maximum likelihood (ML) array shape calibration algorithm is developed, which exploits a deterministic relationship between the reverberation spatial and Doppler frequencies causing it to be low rank in the space-time vector space formed across a single coherent processing interval (CPI). In this application, a sequence of overlapped CPI length snapshots of duration less than the CW pulse is used. The ML estimates obtained for each snapshot are tracked using a Kalman filter with a state equation corresponding to the water pulley model for array dynamics. Simulations performed using real heading sensor data in conjunction with simulated reverberation suggest that 8-10 dB improvement in sidelobe level may be possible using the proposed array shape tracking algorithm versus an algorithm that uses only the available heading information.     

基于脉冲交错的数字阵列雷达任务优化调度算法

针对数字阵列雷达搜索、跟踪和成像任务的资源调度问题,提出一种数字阵列雷达(DAR)任务的优化调度算法。该算法以脉冲交错技术为基础,在对目标搜索与跟踪的同时,利用基于压缩感知的稀疏孔径认知逆合成孔径雷达(ISAR)成像方法对部分精密跟踪目标成像,并采用观测时间动态调整策略以提高雷达系统的自适应能力。仿真结果表明,与传统雷达资源调度算法相比,该算法可以将成像任务考虑到优化调度模型中并合理分配资源,实现雷达多任务并行的调度,获得更高的资源利用率与期望的成像质量。     

Feedforward maximum power point tracking of PV systems using fuzzy controller

A feedforward maximum power (MP) point tracking scheme is developed for the interleaved dual boost (IDB) converter fed photovoltaic (PV) system using fuzzy controller. The tracking algorithm changes the duty ratio of the converter such that the solar cell array (SCA) voltage equals the voltage corresponding to the MP point at that solar insolation. This is done by the feedforward loop, which generates an error signal by comparing the instantaneous array voltage and reference voltage. The reference voltage for the feedforward loop, corresponding to the MP point, is obtained by an off-line trained neural network. Experimental data is used for off-line training of the neural network, which employs back-propagation algorithm. The proposed fuzzy feedforward peak power tracking effectiveness is demonstrated through the simulation and experimental results, and compared with the conventional proportional plus integral (PI) controller based system. Finally, a comparative study of interleaved boost and conventional boost converter for the PV applications is given and their suitability is discussed.     

Mixture Reduction Algorithms for Point and Extended Object Tracking in Clutter

The Bayesian solution to the problem of tracking a target with measurement association uncertainty gives rise to mixture distributions, which are composed of an ever increasing number of components. To produce a practical tracking filter, the growth of components must be controlled by approximating the mixture distribution. Two mixture reduction schemes (a joining algorithm and a clustering algorithm) have been derived for this purpose. If significant well spaced mixture components are present, these techniques can provide a useful improvement over the probabilistic data association filter (PDAF) approach, which reduces the mixture to a single Gaussian component at each time step. For the standard problem of tracking a point target in uniform random clutter, a Monte Carlo simulation study has been employed to identify the region of the problem parameter space where significant performance improvement is obtained over the PDAF. In the second part of this paper, the formal Bayesian filter is derived for an extended target consisting of an array of measurement sources with association uncertainty. A practical multiple hypothesis filter is implemented using mixture reduction and simulation results are presented.     

Voltage-based maximum power point tracking control of PV system

Photovoltaic (PV) generators exhibit nonlinear v-i characteristics and maximum power (MP) points that vary with solar insulation. An intermediate converter can therefore increase efficiency by matching the PV system to the load and by operating the solar cell arrays (SCAs) at their maximum power point. An MP point tracking algorithm is developed using only SCA voltage information thus leading to current sensorless tracking control. The inadequacy of a boost converter for array voltage based MP point control is experimentally verified and an improved converter system is proposed. The proposed converter system results in low ripple content, which improves the array performance and hence a lower value of capacitance is sufficient on the solar array side. Simplified mathematical expressions for a PV source are derived. A signal flow graph is employed for modeling the converter system. Current sensorless peak power tracking effectiveness is demonstrated through simulation results. Experimental results are presented to validate the proposed method     

Minimal submodel-set algorithm for maneuvering target tracking

The variable structure multiple model (VSMM) approach to the maneuvering target tracking problem is considered. A new VSMM design, the minimal submodel-set switching (MSMSS) algorithm for tracking a maneuvering target is presented. The MSMSS algorithm adaptively determines the minimal set of models from the total model set and uses this to perform multiple models (MM) estimation. In addition, an iterative MSMSS algorithm with improved maneuver detection and termination properties is developed. Simulations results demonstrate that, compared with a standard interacting MM (IMM), the proposed algorithms require significantly lower computation while maintaining similar tracking performance. Alternatively, for a computational load similar to IMM, the new algorithms display significantly improved performance.     

A sequential detection approach to target tracking

Sequential hypothesis testing is investigated for multiframe detection and tracking of low-observable maneuvering point-source targets in a digital image sequence. The proposed multiple multistage hypothesis test tracking (MMHTT) algorithm extends tracks formed from sequentially detected target trajectory segments using a multiple hypothesis tracking strategy. The MMHTT algorithm does not require a probabilistic larger maneuver model. Computational efficiency is achieved by using a truncated sequential probability ratio test (SPRT) to prune a dense tree of candidate target trajectories and score the detected trajectory segments. An analytical performance evaluation is presented and confirmed by experimental results from an optical satellite tracking application     

High-resolution multiple target angle tracking

An approach to high-resolution multiple-target-angle tracking that uses the output of an array of sensors is presented. The results of direction-of-arrival estimation by eigenstructure analysis are extended to derive a recursive procedure for tracking moving sources. This procedure involves recursive eigenvalue decomposition and a zero-tracking algorithm, using the coefficient derived from the minimum-norm criterion. The algorithm has superresolution capability in that a pair of closely spaced target angles can be resolved and tracked even though the angular separation between them is less than the reciprocal of the aperture size. Simulation results verify that the algorithm works well in tracking multiple-target sources     

高斯非平稳机动目标波达角模型及跟踪

在实际的跟踪情况中,由于环境条件、目标反射截面等因素的变化,回波信号的功率会随时间变化,即不满足通常阵列信号处理中对高斯信号作平稳性的假设。针对复杂运动条件下高斯非平稳目标的跟踪问题,提出了一种新的机动目标波达角(DOA)模型。该模型全面地刻画了高斯非平稳机动目标的动态,并将目标的DOA和信号功率作为状态变量进行了联合考虑,同时运用虚拟阵列的表示方法构建了相应的观测方程。对于建立的新模型,最后采用无迹卡尔曼滤波(UKF)的框架完成了整个跟踪算法。分析和仿真结果表明,当高斯非平稳机动目标之间存在长时间相互接近的情况时,新方法仍然可以获得较好的跟踪性能。     

基于预测电流控制的光伏并网系统最大功率点跟踪算法

针对光伏发电的突变性及昼发夜停特性提出一种新型的基于预测电流控制的光伏并网系统最大功率点跟踪(MPPT)算法。根据实际情况考虑光伏阵列的非线性特性,最大功率点周围光伏电压的振荡及逆变器、滤波器的设计等。为了确保系统采用控制算法的稳定性,MPPT的设计应运而生,在此基础上通过改进算法从光伏系统的电压与电流预测基准电流进而控制光伏并网系统。通过与传统的波动相关控制方法对比给出了仿真结果。仿真结果表明:在光照发生突变时,与传统的波动相关控制法相比,提出的改进算法的跟踪速度较之提升9.3%,并能够准确跟踪光伏并网系统最大功率点,且性能稳定可靠。     

运动单阵元被动合成阵列波达方向估计

 提出了一种运动单阵元被动合成阵列波达方向(DOA)估计算法。该算法基于被动合成阵列(PSA)的概念,结合空间谱估计的思想构建了运动单阵元被动合成阵列模型,通过多次不同速度合成阵列过程实现对信号DOA的无模糊估计。通过对单次匀速合成阵列过程进行分析得到,在假设信号频率已知条件下,合成阵列算法能够达到与同孔径实阵列多重信号分类（MUSIC）算法相当的DOA估计性能。仿真验证了被动合成阵列与同孔径实阵列的渐近等效性及算法的有效性。     

相控阵雷达长时跟踪波束调度与波形优化策略

针对相控阵雷达多目标跟踪波束调度和波形参数优化控制的问题，本文提出了一种基于马尔可夫决策过程（MDP）的相控阵雷达跟踪波束调度与波形参数优化策略，该方法以无迹卡尔曼滤波（UKF）算法为基础来估计目标的状态。首先将本文的序列决策问题建模为马尔可夫决策过程，定义了资源的效费比和长期回报率，然后与当前实际跟踪误差综合考虑作为MDP的回报函数，进而给出了调度的优化模型，最后将长时决策问题转化为动态规划算法结构进行求解，并且提出了一种并行混合遗传粒子群优化算法来求解各决策时刻的最优策略。仿真结果表明了长时策略的先进性以及寻优算法的优越性，与传统的短时策略相比，跟踪精度可提高11.17%。     

MIMO雷达射频隐身性能优化的目标跟踪算法

随着现代战场中电子对抗的日益激烈,雷达的生存环境受到了严重的威胁。射频（RF）隐身技术是一种提高雷达及其运载平台战场生存能力的重要途径。为提高雷达射频隐身性能,针对具有MIMO探测模式的新体制雷达提出了隐身性能优化的目标跟踪算法。该算法基于射频隐身性能优化模型,通过自适应控制系统的子阵划分个数、平均发射功率、波束驻留时间以及采样周期,在满足系统跟踪性能要求的前提下优化系统射频隐身性能,其中的射频隐身性能综合考虑了截获因子及采样周期。仿真结果表明,与传统相控阵雷达相比,本文所提出的目标跟踪算法使MIMO雷达具有更好的射频隐身性能。     

一种密集多回波环境下的机动多目标跟踪起始算法

 本文研究密集多回波环境下的机动多目标跟踪起始问题。文中首先提出主跟踪子空间和边缘跟踪子空间的定义与性质,接着修正Bayes轨迹确定方法BTC,并将其与具有残差滤波的修正概率数据关联滤波算法MPDAF-RF有机地结合起来,提出一种适合高密集多回波环境的机动多目环跟踪起始方法——“全邻”Bayes跟踪起始算法ABTI。Monte Carlo仿真表明,本文所给出的算法不仅克服了一类概率数据关联滤波方法没有跟踪起始机理的缺陷,而且辨别目标与虚警的能力很强,不失为解决高密集多回波环境下机动多目标跟踪起始的有效方法。     

多目标跟踪中自适应时间资源调度

为了提高雷达的工作效率,在改进交瓦多模型-概率数据关联(IMMPDA)跟踪算法的基础上,提出了基于灰色关联度和粒子群优化理论的自适应多目标跟踪的时间资源凋度(ATRS)算法.首先对每个跟踪目标设置不同的期望跟踪精度;然后以灰色关联度作为资源管理模型中的度冒函数和粒子群算法中的适应度甬数,来衡量各种情况下预测跟踪精度与期...