Sensitivity of a ramp equalizer for series batteries

To realize the maximum potential of large series connected battery packs, the individual battery voltages should be maintained at fairly uniform values, i.e., the voltages should be equalized. The ramp type of electronic equalizer has proven to be very effective in performing this task since it offers the advantages of simplicity and convenience. However, to achieve maximum performance, it is necessary to understand how the circuit is affected by certain parameters. This is accomplished by defining the circuit sensitivity and using a simplified model to explain the relative effects of leakage inductance, frequency, and power level     

Battery condition management: an important way to protect acritical asset

The efficacy of employing battery condition management equipment and procedures is demonstrated on the solid basis of field experience in which the host batteries were found either to be flawed or operated in ways that would compromise reliability. Examples found using such equipment and reported in this paper include a cell whose voltage vacillated daily while on float, post/strap joints whose accept/reject connection integrity was erratic with time, chargers whose voltages were improperly set (both high and low), and a battery room environment whose conditions were life-shortening to electrolytic cells     

一种基于SOC补偿器的并联型 电池系统等效电路模型

以锂离子电池为载体的电源系统为航天器稳定、可靠运行提供了一种有效 的方式。通过多个电池单体的并联可扩大电池系统容量,即并联型电池系统。针对锂离 子并联型电池系统的工作特性,因电池单体性能参数不一致而难以被准确表征的问题, 分析各电池单体性能参数与电池系统性能参数的扩展关系及并联电路工作特性,提出一 种基于SOC 补偿器的并联型电池系统等效电路模型;在Matlab/Simulink 环境下搭建电池 系统仿真平台,通过仿真结果与实验数据对比分析验证所提出模型的准确性。     

Tests of a full-sized mechanically rechargeable zinc-air battery inan electric vehicle

A mechanically rechargeable zinc-air battery that has high power density and fast refueling capability is described. The battery is built from modules of 32 or 44 cells connected in series, and the modules can be arranged in any combination of series and parallel connections, and in practical quantity, according to the requirements of the vehicle, motor, and controller. The results of laboratory and in-vehicle tests of a zinc-air battery consisting of two 32-cell modules connected in series, with nominal voltage of 75 V and nominal capacity of 216 Ah, are presented     

Charge equalization for an electric vehicle battery system

Charge equalization for series connected battery strings has important ramifications on battery life. It enhances the uniformity of the battery cells and hence improves the life of the battery as a whole. A new charge equalization technique for a series string of battery cells has been recently proposed by the authors. The basic technique utilizes a simple isolated dc-to-dc converter with a capacitive output filter along with a multiwinding transformer. The possibility of integrating the trickle charge function with the charge equalization function is potentially very attractive, as it can lead to an efficient and low cost implementation     

基于无迹卡尔曼滤波法的串联型电池系统 荷电状态估计研究

以锂离子电池为载体的电源系统为航天器稳定可靠运行提供了一种有效的方式.多个电池单体经串联可扩大电池系统容量,即串联型电池系统.为准确估计串联型锂离子电池系统的荷电状态(State of Charge,SOC),针对扩展卡尔曼滤波(Extended Kalman Filter,EKF)计算复杂、精度不高等问题,结合串联型电池系统空间状态方程,提出基于无迹卡尔曼滤波法(Unscented Kalman Filter,UKF)的串联型电池系统荷电状态估计算法.在恒流和脉冲两种工况下,通过对比分析UKF与EKF算法的仿真结果与实验数据的匹配情况,证明了提出算法的准确性和高鲁棒性.     

Considerations regarding the comparison of traction batteries

S.E.A. has been developing, since 1983, the zinc-flow-battery to be ready for mass production. In 1993 the Boston based Power Cell Corporation (PCC) acquired S.E.A. and the new company intends to erect a facility to produce 150.000 kWh at the end of 1994. Since 1985 zinc-flow-batteries are used to power electric-vehicles in capacities between 5 kWh and 45 kWh at voltages between 48 V and 216 V. A 22.5 kWh/96 V battery assembled in a Fiat-Panda is shown, which achieves 260 km per charge at 50 km/h constant. This Panda participated in several rallies. A purpose designed 15 kWh/144 V battery for the Hotzenblitz-EV is also shown, which demonstrates the design-flexibility of the battery. The battery is mounted from underneath the car body between the four wheels and does not consume valuable space in the front or rear of the car. This position is a significant contribution to the safety of passengers. Mass production for this EV is foreseen in 1995. About 50,000 kms of testing experience partially in direct comparison with originally assembled lead acid batteries showed results with zinc-flow-battery equipped EVs, which were significant better than was expected. Referring to about the same battery weight a two- to threefold range was experienced with the zinc-flow-system independent of the driving cycle and independent of the battery capacity compared     

容错航空蓄电池电源及其均衡管理

航空蓄电池在实际使用中会出现电池性能衰退与退化速率不一致,电池组容量与使用寿命降低,甚至可能出现严重的安全事故。针对电池单体不一致性和故障隔离问题,提出一种蓄电池电源系统容错体系结构和分级容错控制策略,提出基于电池单体动态重构的主动均衡管理新方法,设计基于"冒泡沉底（BS）择优上岗"的电池单体实时动态重构策略。开发容错航空镍镉电池电源原理样机,给出系统实验性能分析,实验结果表明所提出的系统技术方案可行有效,能够快速隔离故障失效电池单体,明显改善电池不一致性,提高了电池组容量利用率和剩余使用寿命。     

Selective buck-boost equalizer for series battery packs

To maximize the capacity and reliability of a series connected battery pack, a new selective equalizer developed from the earlier ramp equalizer is proposed. A set of bipolar junction transistors (BJTs) controlled by a microcontroller is used to route equalization current to the lowest voltage batteries. Since only the lowest voltage batteries are connected to the equalizer, the need for uniform transformer leakage inductance is avoided, and a lower power level can be used since no excess current flows to the other batteries. An equalization experiment has shown that a 37 W selective equalizer had a slightly better effect on a 24-battery pack than a 63 W ramp equalizer     

Artificial hearts, batteries, and electric vehicles

New battery applications ranged from an implanted battery that powers an artificial heart, to powering a seismic sensor behind an oil-well drilling bit as it grinds through rock looking for oil-bearing structure. These applications require high reliability that justifies the cost of thorough qualification testing, production control, acceptance testing of every cell, and tracking every cell by its serial number through its lifetime. Electric vehicle developments ranged from electric scooters for commuting to work in Europe to electric cars connected to the electric grid when not being driven. Availability of their battery energy for carrying load peaks is so valuable that the electric utility being supported could offer to replace the vehicles batteries whenever they wear out, with no cost to the car owner.     

Noise Generation of a Switching Regulator

Analytical and experimental considerations on the surge and noise generated in a typical switching regulator are discussed. There are two kinds of surges which occur in the switching instants of the transistor. These surges appear as high voltages across the semiconductor elements and decrease their reliabilities. Corresponding to the surge generation, noise voltages appear in the output terminals and may induce malfunctions of a signal processing device connected to the regulator. We analyze these surge and noise voltages by means of high-frequency equivalent circuits.     

Stochastic battery discharge in portable communication devices

The objective of this work is to explore ways in which performance of battery systems can be enhanced through the use of energy-efficient battery management techniques. The phenomenon of charge recovery that takes place under pulsed discharge conditions is identified as a mechanism that can be exploited to enhance the capacity of a cell in a portable communication device. The bursty nature of many data traffic sources suggests that data transmissions in communication devices may provide natural opportunities for charge recovery. We model the data source as a stochastic process and let the cell discharge be driven by such a process. We use a model of a dual lithium ion insertion cell to identify the improvement to cell capacity that results from the stochastic discharge. The insight from this study leads us to propose discharge shaping techniques that tradeoff energy efficiency with delay in the required current supply     

Development of a long cycle life sealed nickel-zinc battery forhigh energy-density applications

Nickel-zinc battery technology is being developed for commercial applications requiring high energy density and high power capability. Development cells have demonstrated the ability to deliver over 60 Watt-hours per kilogram at the one hour rate. Cycle life has been improved to more than 600 cycles at 80% depth of discharge by using a patented, reduced solubility zinc electrode and an improved sealed cell design. More than 8000 charge/discharge cycles at 10% depth-of-discharge have been completed. Large quantities of sealed prismatic cells have been manufactured, including a 140 cell, 220 V battery for a hybrid electric vehicle (HEV)     

燃料电池无人机动力系统方案设计与试验

针对燃料电池为主能源的无人机（UAV）动力系统,设计了纯燃料电池动力系统、燃料电池/蓄电池（简称燃蓄）被/主动混合动力系统3种拓扑结构方案。以空冷质子交换膜燃料电池为例,搭建了燃料电池动力系统方案一体化试验平台。考虑阶梯型和阶跃型2种加载形式,试验研究了燃料电池自身的动态特性和启动特性。以阶梯型功率剖面的加载形式,试验研究了纯燃料电池动力系统放电特性;以无人机典型任务剖面作为加载形式,开展燃蓄被/主动混合动力系统对比试验研究。试验结果表明：纯燃料电池动力方案适用于低机动小型无人机,燃蓄被动混合方案可满足小型无人机大机动飞行,燃蓄主动混合方案系统可适应中大型无人机更长航时飞行。     

A microcontroller-based intelligent battery system

State-of-charge indication for a secondary battery is becoming increasingly important for battery-operated electronics. Consumers are demanding fast charging times, increased battery lifetime, and fuel gauge capabilities. All of these demands require that the state of charge within a battery be known. One of the simplest methods employed to determine state of charge is to monitor the voltage of the battery. However, this method alone is not a good indicator of battery energy, since both NiMH and NiCd batteries have voltage-versus-energy curves that are essentially flat. This paper presents a more effective method of determining the state of charge in secondary cell batteries. A NiMH battery is used as our test vehicle, since it is one of the more difficult batteries to determine state of charge. This method monitors the battery's temperature, voltage, and discharge/charge rate. A microcontroller then manipulates the information, using look-up tables to determine the state of charge. Also, by modifying the look-up tables, this technique can be employed in many other battery technologies and is not limited to NiMH     

Evaluation of active hybrid fuel cell/battery power sources

Hybrid fuel cell/battery power sources have potentially widespread uses in applications wherein the power demand is impulsive rather than constant. Interposing a dc/dc converter between a fuel cell and a battery can create two configurations of actively controlled hybrid fuel cell/battery power sources. Those two configurations are compared using both theory and experiment with special attention to the peak power enhancement, and power losses in the converter. Both of the defined configurations were built, using a 35 W polymer electrolyte membrane (PEM) fuel cell, an 8-cell lithium-ion battery pack, and a high-efficiency power converter. Both two configurations yielded a peak power output of 135 W, about 4 times as high as the fuel cell alone could supply, with only a slight (13%) increase of weight. The converter losses were quantitatively analyzed. Which of the two configurations yields a smaller loss depends on the load power demand characteristics including peak power and load duty ratio. The study results provide guidance for the design of hybrid sources according to the particular load power requirements.     

Advanced lithium ion battery charger

A lithium ion battery charger has been developed for four and eight cell batteries or multiples thereof. This charger has the advantage over those using commercial lithium ion charging chips in that the individual cells are allowed to be taper charged at their upper charging voltage rather than be cutoff when all cells of the string have reached the upper charging voltage limit. Since 30-60% of the capacity of lithium ion cells may be restored during the taper charge, this charger has a distinct benefit of fully charging lithium ion batteries by restoring all of the available capacity to all of its cells     

Multiplier Offset Voltages in Adaptive Arrays

The effects of multiplier offset voltages in adaptive arrays are examined. Multiplier offset voltages arise when active circuits are used to implement the error-by-signal multipliers required in an array based on the LMS algorithm. These offset voltages are known from experimental work to have a strong effect on array performance. It is first shown how multiplier offset voltages may be included in the differential equations for the array weights. Then their effect on weight behavior is studied. It is found that the offset voltages affect the final values of the weights, but not the time constants. Furthermore, the effect they have is influenced by the amount of element noise in the array. An adequate amount of noise is necessary to minimize weight errors due to offset voltages. An example is treated to show the effect of offset voltages on the final array weights and the output signal-to-noise ratio (SNR). With offset voltages present, it is found that there is a maximum SNR that can be obtained from the array. A specific input SNR is required to obtain this maximum output SNR. Finally, it is shown that a finite operating range for the weights places a further restriction on the acceptable values of offset voltages and noise.     

Control technique for high power factor multilevel rectifier

Three control techniques for a high power factor multilevel pulsewidth modulation (PWM) rectifier are proposed. The proposed rectifier is based on series connection of full-bridge cell to achieve a high power factor, low current distortion, low voltage stress of power semiconductors and two balanced output voltages. The look-up table is used in the proposed control schemes to reduce the hardware circuit. A capacitor voltage compensator is used to balance two dc capacitor voltages in order to obtain high quality PWM voltage pattern. Based on the proposed control schemes, two-level or three-level PWM pattern can be generated on the ac side of the adopted rectifier. The proposed techniques for a high power factor multilevel rectifier illustrate its validity and effectiveness through the respective simulations and experiments. According to the measured results, the current harmonics drawn from the mains meet the International Electrotechnical Commission (IEC) 1000-3-2 limits