用户星天线空间扫描策略

 天线空间扫描过程是建立中继卫星系统星间链路的关键阶段之一。首先分析比较了水平行扫、螺旋扫描和分行螺旋扫描策略,并根据分析结果,结合轨迹预处理算法,设计了一种变速分行螺旋扫描策略。然后采用蒙特卡罗仿真分析了用户星天线开环回扫指向精度,近似确定了天线空间扫描的范围。最后通过仿真比较等速分行螺旋扫描和变速分行螺旋扫描策略,并仿真了用户星天线捕获中继卫星的过程,通过仿真结果证明所设计的变速分行螺旋扫描具有一定的工程应用价值。     

Zenith Pass Problem of Inter-satellite Linkage Antenna Based on Program Guidance Method

While adopting an elevation-over-azimuth architecture by an inter-satellite linkage antenna of a user satellite, a zenith pass problem always occurs when the antenna is tracing the tracking and data relay satellite （TDRS）. This paper deals with this problem by way of, firstly, introducing movement laws of the inter-satellite linkage to predict the movement of the user satellite antenna followed by analyzing the potential pass moment and the actual one of the zenith pass in detail. A number of specific orbit altitudes for the user satellite that can remove the blindness zone are obtained. Finally, on the base of the predicted results from the movement laws of the inter-satellite linkage, the zenith pass tracing strategies for the user satellite antenna are designed under the program guidance using a trajectory preprocessor. Simulations have confirmed the reasonability and feasibility of the strategies in dealing with the zenith pass problem.     

卫星光通信APT控制系统H∞设计

 捕获瞄准跟踪(APT)控制系统的设计是影响整个星间光通信系统性能的重要因素。利用指向偏差的概率分布阐述了卫星光通信过程中捕获概率、跟踪误差及误码率受卫星平台振动和终端装置参数摄动的影响,通过功率谱分析了卫星平台振动在低频段、对象不确定性在高频段对指向偏差的影响,并对其进行了模型化分析。采用H_∞控制混合灵敏度设计方法同时抑制干扰和处理受控对象不确定性问题进行控制器设计。仿真验证表明该方法得到的控制器对平台干扰具有抑制力,对对象摄动具有鲁棒性。     

卫星导航系统星间链路空间参数与覆盖分析

分析一种全球导航星座的星间链路，得到了星间距离、俯仰角、方位角等参数的变化曲线。最后，通过对这些空间参数的变化曲线进行分析，对星间链路的天线设计提出了基本要求。     

一种FMCW SAR地面运动目标谱图域参数估计方法

对调频连续波(FMCW)合成孔径雷达(SAR)地面运动目标的参数估计方法进行了研究,采用相位中心偏置天线(DPCA)技术对地杂波进行抑制,分析了载机及地面运动目标连续运动对回波信号的影响,推导了采用DPCA技术引入的回波慢时间包络(STE)项与地面运动目标参数之间的关系。在此基础上,提出了一种地面运动目标谱图域参数估计方法,该方法首先利用Radon变换在谱图域估计导致回波信号距离走动的目标等效径向速度,并对距离走动进行校正;其次,在谱图域中提取运动目标回波幅度,根据STE项引起的回波幅度变化与目标方位向速度之间的关系,估计目标的方位向速度,并进一步求解相应的目标径向速度。所提方法能够在谱图域完成地面运动目标二维速度估计,最后的仿真实验验证了所提方法的有效性和可行性。     

Optimal Design of Stewart Platform Safety Mechanism

提出了基于连杆空间优化设计一种在整个杆长范围内可以随意运动的安全机构的思想。通过分析得出了 Stewart 平台型并联机构的 16 种极限状态,利用同伦法和奇异点判别条件对极限状态的奇异点进行了求解,得到连杆长度的最大值,并通过实例分析了机构在极限状态间运动时铰链转角和连杆间距离的变化情况。然后综合考虑各项约束条件,提出了安全机构检验算法。以极限状态的条件数均值最小为优化目标优化机构的所有结构参数,设计出具有较好的全局运动性能的安全机     

Effects of Navigation Errors in Maneuvering SAR

A maneuvering synthetic aperture radar in squint mode, during a loosely piloted maneuver, is simulated with presence of various navigation system errors. The error sources investigated place emphasis on short-term effects, involving platform servo transients, noise and quantization in accelerometers, interaction of angle pickoff uncertainty with the displacement from platform to radar antenna, and uncertainty in this displacement itself. Simulation results are accompained by interpretive discussion, and followed by suggested areas for further study.     

Clutter Spectra of Low PRF AMTI Pulse-Doppler Radar

Approximate expressions are derived for the video clutter spectra in the receiver of a low pulse repetition frequency (PRF), airborne moving target indicator (AMTI), pulse-Doppler radar for both step-scanning and continuous-scanning antennas. The receiver is assumed to process the received waveform with a clutter-tracking oscillator and a window function is employed to obtain short-term spectra. Except for the broadening effects of the window function, it is shown that the clutter spectrum can be simply related to the antenna voltage-gain pattern. It is further shown, in the scanning antenna case, that the combined spectral broadening due to platform motion and antenna scanning cannot be assumed to be the result of the convolution of the separate effects unless the antenna gain pattern has a Gaussian shape. The approximate clutter expressions are illustrated by examples and are shown to agree well with the results of computer calculations.     

基于CCD激光经纬仪测量的舰载雷达标校方法

介绍了一种利用激光测距仪测距、CCD光学经纬仪测角对动态的舰载雷达天线进行定位的雷达标校方法。探讨了对动态目标的定位原理,给出了真值测量的数学模型,论证了方位标的设计原则,分析了雷达标校的精度。     

窄频差硅基环形陀螺检测闭环控制系统设计

针对窄频差硅基环形波动陀螺动态性能差的问题，提出了一种基于比例积分微分-惯性环节（proportion integral differential-inertial element，PID-IE）的串联式相位校正检测闭环系统控制器。以硅微机械陀螺仪结构运动方程为基础建立了理想的窄频差U 形弹性梁硅基环形波动陀螺仪的系统模型。通过对环形陀螺开环工作状态下的系统模型及其外围电路的传递函数和波特图分析，设计了一种基于PID-IE的检测闭环系统控制器。通过对其系统模型及外围电路时域仿真，验证了该检测闭环控制系统的可行性，通过仿真发现，加入该控制器后的陀螺输出稳定时间减少了50%，陀螺检测位移输出减小了2个数量级，基本实现了该陀螺的检测位移抑制。在模拟电路中实现了该检测闭环控制系统后，通过实验测试了陀螺检测闭环控制前后的各项性能指标。通过实验测试发现，实现闭环控制后，陀螺输出稳定时间约为0.15 s，陀螺检测位移在闭环工作状态下比开环工作状态减小了97%，陀螺的标度因数比检测开环提高了10倍,零偏及零偏不稳定性与检测开环相比分别提升了3倍和8倍，且闭环控制系统的工作带宽比开环工作带宽提高了30倍。     

舰载直升机系留载荷及全机应力计算方法研究

 舰载直升机的系留问题是舰、机双系统联系的关键。与地面系留的不同在于舰载系留是基于运动着的基础。特别在高海情下,机体承受各个方向的过载,且载荷较大。这样,机体结构及系留索具是否有足够的承载能力,就显得异常重要。 运动着的基础、系留索具单向承载性以及起落架承载与变形的非线性关系构成了舰载系留的特点。本文针对这些特殊问题,进行了合理而有效的处理。分别采用了“矩阵力法”及“矩阵位移法”进行系留索具的载荷和机体结构应力的计算,并与实验进行了对比分析,得到了满意的结果。     

Land mobile satellite propagation experiments in Kyoto City

In February of 1990, land mobile satellite propagation experiments were conducted in Kyoto City, Japan, using the Engineering Test Satellite V (ETS-V). The signal transmitted from the satellite was received and recorded at a mobile unit moving in different streets of the downtown area. The streets chosen have typical downtown medium and high rise buildings, electric utility poles, trees, etc., which caused obstruction to the satellite line of sight. The propagation characteristics such as fade/nonfade distribution, joint fade and nonfade distribution, phase distribution, and their dependence on the antenna type are discussed for the measured link. Error characteristics in digital communication for the above link have been qualitatively analyzed on the basis of the measured signal level fluctuation. Effect of interleaving and coding to improve the communication link is also discussed     

新一代北斗试验卫星伪距质量初步评估

为验证北斗全球系统卫星新型导航信号体制、星间链路和高精度原子钟等关键技术,中国于2015年3月30日至2016年2月1日间发射了5颗新一代北斗试验卫星。试验卫星除了播发新的民用信号B1C和B2外,同时还播发B1I和B3I平稳过渡信号。试验卫星导航信号的伪距质量以及北斗现有工作卫星存在的与高度角相关伪距误差问题在新一代北斗卫星上是否得到解决是大家普遍关注的问题,将基于北斗试验卫星实测数据对此进行初步评估与验证。     

Leveling of Analytic Platforms

Use of an analytic platform or strapdown system requires that the system em be initially leveled just as a conventional multigimbaled platform must be leveled. The process of leveling involves the determination of the orientation between the local vertical and an instrumented reference nce frame. With a conventional platform it is quite common to use a pair of servo loops to precess the inner gimbal until gravity signals are nulled on two orthogonally mounted accelerometers. The input axes of these two accelerometers thus define the horizontal plane and the platform is said to be leveled. A strapdown system, however, lacks the physical entity of the inner gimbal and consequently cannot be physically precessed into verticality. The method of leveling is nonetheless analogous if we consider the computational reference frame of the analytic platform to be the "alter ego" or counterpart of a physical inner gimbal. In general, strapdown leveling techniques can be divided into two categories: closed-loop leveling and open-loop leveling. These two techniques are quantitatively developed and discussed in this paper.     

一种在紧缩场进行捕获跟踪试验的方法

为满足不断增长的天基中继业务需求,航天器星间链路常使用大口径高增益天线,且配置自动捕获和跟踪设备,以完成对目标航天器的自动跟踪.随着天线口径的增大,对场地空间要求不断增大,地面验证试验变得愈加困难.针对越来越难以实现的捕获跟踪外场试验,提出一种在紧缩场进行捕获跟踪试验的方案,方案详细分析了在紧缩场进行试验的可行性.通过设置跟踪通道校相因子,很好地分离了角误差信号,获得良好的S曲线以及非常小的交叉耦合,从而验证了在紧缩场进行捕获跟踪试验是可行的.相对于传统的远场测试方法,该方法具有不受气候影响、费用低等优点.     

导航星座的自主导航技术--卫星自主时间同步

基于星载原子时钟频率稳定性的Allan方差表达,建立系统状态方程,并以星间双向测量伪距差作为基本观测量,组成系统测量方程,从而可以设计适用于导航星座卫星时间同步的Kalman滤波算法。系统仿真结果表明：通过对星间双向测量数据的滤波处理,能够实现星座卫星时间精密同步。     

基于牛顿欧拉法的3-RPS并联机构逆动力学分析

 以3-RPS机构为例，研究了对称少自由度并联机构的逆动力学问题。因其自由度数目小于6，该类机构的支链不仅传递驱动力，同时还需为动平台提供约束。然而，现有文献大多未对广义约束力给予足够的重视。采用牛顿欧拉法建立了3-RPS机构的刚体动力学方程，给定动平台的运动规律及外载荷后，可一并求解机构所需的驱动力与约束力矩。算例仿真表明，与动平台自由速度方向不一致的外载荷主要需由约束力矩平衡。因此，在对称少自由度并联机构动力学设计中，必须计入广义约束力的影响。     

星间链路数量受限的导航卫星网络链路分配问题

对星间链路数量非常有限、需要同时满足星间测距和星间通信需求的导航卫星网络的链路分配问题进行了研究。首先,分析了导航卫星网络的特点,并设计了一种基于有限状态自动机(FSA)的拓扑处理机制。然后,将星间测距需求作为一个约束,以星间通信的延时性能为优化目标,将导航卫星网络的链路分配问题建模为一个多目标优化问题。最后,针对建立的多目标优化问题,分别提出一种基于首次改善(FI)的本地搜索算法和基于模拟退火(SA)的启发式优化算法以对链路分配问题进行求解,并提出一种基于分支交换策略的新链路分配生成方法。仿真结果表明,通过FI算法和SA算法获得的优化链路分配的网络延时性能均得到了改进,且SA算法的性能要优于FI算法;同时,FSA的状态持续时间的减小有利于获得网络延时性能好的链路分配。     

Development of airborne moving target radar for long range surveillance

The following topics are discussed in the context of the development of an airborne moving target radar for long range surveillance: US Navy long range shipborne radar; Cadillac I airborne early warning (AEW) radar; Cadillac II airborne early warning (AEW) radar; airborne moving target indicating (AMTI) radar; related post-war radar activities; and the invention of the displaced center antenna. Among the topics studied is the use of a monopulse antenna in an MTI radar to remove the degradation of the MTI caused by rapid scanning of the antenna. A method of using a monopulse antenna for motion compensation in airborne MTI is discussed.<>     

Comparison between monostatic and bistatic antenna configurationsfor STAP

The unique characteristics of bistatic radar operation on the performance of airborne/spaceborne moving target indicator (MTI) radars that use space-time adaptive processing (STAP) are discussed. It has been shown that monostatic STAP radar has the following properties. 1) For a horizontal flight path and a planar Earth the curves of constant clutter Doppler (isodops) are hyperbolas. 2) For a sidelooking antenna geometry the clutter Doppler is range independent. 3) Clutter trajectories in the cosφ-F plane (F=normalized Doppler) are in general ellipses (or straight lines for a sidelooking array). We demonstrate that these well-known properties are distorted by the displacement between transmitter and receiver in a bistatic configuration. It is shown that even for the sidelooking array geometry the clutter Doppler is range-dependent which requires adaptation of the STAP processor for each individual range gate. Conclusions for the design of STAP processors are drawn