The data compression problem for the “GAIA” astrometric satellite of ESA

Space-based astrometry has a great tradition at ESA. The first space-based astrometric satellite in history, “Hipparcos”, was launched by ESA in 1989 and, in spite of orbital problems, was able to accomplish almost all of its tasks until it was finally shut down in 1993. The results of the Hipparcos mission were published by ESA in 1997 in the form of six CD-ROMs: the Hipparcos Catalogue contains 118,218 entries with median astrometric precision of around 1 milliarcsec, and specific results for double and multiple systems. In practice, Hipparcos drew for the first time the three-dimensional “map” of the spherical region of the Galaxy surrounding the Sun and having a radius of roughly 1,000 light years.

Then, in 1995, ESA launched the study of a new astrometric satellite, named “GAIA” and about a hundred times more powerful than Hipparcos, i.e. with median astrometric precision of around 10 microarcsec. This new satellite is intended to measure the parallaxes of over 50 million stars in the Galaxy, at least for the brightest stars, and this would mean to “draw” the three-dimensional map of the whole Galaxy, reaching out even to the Magellanic Clouds, 180,000 light years away.

The team of European scientists and engineers now designing GAIA, however, is facing hard technological difficulties. One of these is the design and coding of radically new and ultra-powerful mathematical algorithms for the on-board compression of the 50-million-stars data that GAIA will send to Earth from its intended geostationary orbit. Preliminary estimates of the raw data rates from the GAIA focal plane, in fact, are of the order of a few Gigabits per second. To reduce the data stream to the envisaged telemetry link of 1 Megabit per second, on-board data compression with a 1 to 1,000 ratio is the target. Clearly, this is far beyond the capabilities of any lossless compression technique (enabling compression ratios of 1 to some tens), and so some “wise” lossy compression mathematical procedure must be adopted.

In this paper a GAIA-adapted lossy data compression technique is presented, based on the Karhunen-Loève Transform (KLT). The essence of this method was already used by NASA for the Galileo mission when the large antenna got stuck and the mission was rescued by re-programming the on-board computer in terms of the KLT. That transform was officially named ICT — “Integer Cosine Transform” — by the NASA-JPL team led by Dr. Kahr-Ming Cheung. But the KLT here described for GAIA will of course differ from the JPL one in many regards, owing to the advances in computer technology.

Finally, estimates are also given about the possibility of using the KLT for onboard data compression in case GAIA is going to be put into orbit around the Lagrangian point L2 of the Earth-Sun system, and, above all, in case the number of stars to be observed is actually raised from 50 millions to one billion, as ESA currently appears to be likely to pursue.     

The navigational experiments on microgravitational space platform “FOTON-M2”

This paper presents the review of results of the navigating experiments which have been carried out during flight of microgravitational space platform (MSP) Foton-M2 in May–June 2005. The brief characteristic of the created MIRAGE–M equipment consisting from magnitometric system and satellite radionavigation receiver is given. The measurements have allowed to restore unguided MSP movement and to estimate a level of microaccelerations (microgravitations) onboard during flight, and have provided precision time-position binding of the research experiments. The data from the equipments transmitted on the telemetering channel have allowed testing the information technologies of virtual support of experiments in space. Flight testing of the equipment has allowed make a conclusion on usefulness of accommodation onboard the small-sized auxiliary navigating system focused for work with users of research experiments. The experiments on MSP Foton-M2 are the development of experiments with MIRAGE equipment carried out in 1999 during flight time of MSP Foton-12 [N.D. Semkin, V.V. Ivanov, V.I. Abrushkin, V.L. Balakin, I.V. Belokonov, K.E. Voronov, The experiments with magnetic fields formed by technical equipment inside Foton-12 spacecraft: the results of the MIRAGE experiments, in: Proceedings of International Conference “Scientific and Technological Experiments on Russian Foton/Bion Recoverable Satellites: Results, Problems and Outlooks”, 25–30 June 2000, pp. 116–122; V.L. Balakin, I.V. Belokonov, V.V. Ivanov, “Determination of motion of spacecraft Foton-12 as a result of magnetic fields measurement in MIRAGE experiment”, pp. 231–238 (published in the same place)].Paper is executed within the framework of the grant of the Russian Fund of Fundamental Researches 06-08-00244.     

Innovations for competitiveness: European views on “better-faster-cheaper”

The paper elaborates on “ lessons learned” from two recent ESA workshops, one focussing on the role of Innovation in the competitiveness of the space sector and the second on technology and engineering aspects conducive to better, faster and cheaper space programmes. The paper focuses primarily on four major aspects, namely:

1. a) the adaptations of industrial and public organisations to the global market needs;

2. b) the understanding of the bottleneck factors limiting competitiveness;

3. c) the trends toward new system architectures and new engineering and production methods;

4. d) the understanding of the role of new technology in the future applications.

Under the pressure of market forces and the influence of many global and regional players, applications of space systems and technology are becoming more and more competitive. It is well recognised that without major effort for innovation in industrial practices, organisations, R&D, marketing and financial approaches the European space sector will stagnate and loose its competence as well as its competitiveness. It is also recognised that a programme run according to the “better, faster, cheaper” philosophy relies on much closer integration of system design, development and verification, and draws heavily on a robust and comprehensive programme of technology development, which must run in parallel and off-line with respect to flight programmes.

A company's innovation capabilities will determine its future competitive advantage (in time, cost, performance or value) and overall growth potential. Innovation must be a process that can be counted on to provide repetitive, sustainable, long-term performance improvements. As such, it needs not depend on great breakthroughs in technology and concepts (which are accidental and rare). Rather, it could be based on bold evolution through the establishment of know-how, application of best practices, process effectiveness and high standards, performance measurement, and attention to customers and professional marketing. Having a technological lead allows industry to gain a competitive advantage in performance, cost and opportunities. Instrumental to better competitiveness is an R&D effort based on the adaptation of high technology products, capable of capturing new users, increasing production, decreasing the cost and delivery time and integrating high level of intelligence, information and autonomy. New systems will have to take in to account from the start what types of technologies are being developed or are already available in other areas outside space, and design their system accordingly. The future challenge for “faster, better, cheaper” appears to concern primarily “cost-effective”, performant autonomous spacecraft, “cost-effective”, reliable launching means and intelligent data fusion technologies and robust software serving mass- market real time services, distributed via EHF bands and Internet.

In conclusion, it can be noticed that in the past few years new approaches have considerably enlarged the ways in which space missions can be implemented. They are supported by true innovations in mission concepts, system architecture, development and technologies, in particular for the development of initiatives based on multi-mission mini-satellites platforms for communication and Earth observation missions. There are also definite limits to cost cutting (such as lowering heads counts and increasing efficiency), and therefore the strategic perspective must be shifted from the present emphasis on cost-driven enhancement to revenue-driven improvements for growth. And since the product life-cycle is continuously shortening, competitiveness is linked very strongly with the capability to generate new technology products which enhance cost/benefit performance.     

RADAR “SAIL” satellite concept

The Radar SAIL concept is based on the use of a rectangular antenna lying in the dawn-dusk orbital plane with the length (along speed vector) smaller than the height. Such geometry makes it possible to place the solar cells on the back of the antenna, to use gravity gradient stabilisation, and to implement multipath-free GPS interferometric measurement of the antenna deformation thus allowing structural relaxation. Less obviously, the geometry favours the RADAR design too, by allowing grating lobes and therefore a lower density of built-in electronic in the active antenna. The antenna can be thin and packed for launch inside a cylinder-shaped bus having pyrotechnic doors for the antenna deployement and bearing the rest of the payload and the service equipment. With respect to a standard design of performant missions, cost savings come from the bus, whose functions (AOCS, power supply) are simplified, from the launch since the mass budget and the stowing configuration become compatible with medium size rockets (LLV2/3, DELTA-LITE, LM-4.), and from the active antenna built-in electronics.

The RADAR SAIL concept is all the more cost effective when the mission requires a large, high and short antenna, i.e. high resolution (<5m), low frequency band (L or S or even P), high revisiting, multiple frequencies. Mission implementation and funding can be favored by the new capability to share the satellite between autonomous regional operators. Combined with ground DBF (digital beam forming) technique, the concept allows extremely simple and low cost missions providing a fixed wide swath (10 to 15 m resolution within 500km to 1000 km swath) for systematic surveillance or monitoring.     

NASA''s small spacecraft technology initiative “Clark” spacecraft

The Small Satellite Technology Initiative (SSTI) is a National Aeronautics and Space Administration (NASA) program to demonstrate smaller, high technology satellites constructed rapidly and less expensively. Under SSTI, NASA funded the development of “Clark,” a high technology demonstration satellite to provide 3-m resolution panchromatic and 15-m resolution multispectral images, as well as collect atmospheric constituent and cosmic x-ray data. The 690-Ib. satellite, to be launched in early 1997, will be in a 476 km, circular, sun-synchronous polar orbit. This paper describes the program objectives, the technical characteristics of the sensors and satellite, image processing, archiving and distribution. Data archiving and distribution will be performed by NASA Stennis Space Center and by the EROS Data Center, Sioux Falls, South Dakota, USA.     

“Space superiority”: Wernher von Braun's campaign for a nuclear-armed space station, 1946–1956

The literature on the history of spaceflight has depicted the early 1950s Collier’s articles mostly as a forerunner to the peaceful and scientific exploration of space. Yet the centerpiece of Wernher von Braun's plan was a manned space station that would serve as reconnaissance platform and orbiting battle station for achieving “space superiority” over the USSR. One its roles could be the launching of nuclear missiles. When challenged as to the station's defensibility, von Braun even posited pre-emptive atomic strikes from space as a response to the development of a hostile anti-satellite capability.     

Autonomic function testing aboard the ISS using “PNEUMOCARD”

Investigations of blood pressure, heart rate (HR), and heart rate variability (HRV) during long term space flights on board the “ISS” have shown characteristic changes of autonomic cardiovascular control. Therefore, alterations of the autonomic nervous system occurring during spaceflight may be responsible for in- and post-flight disturbances. The device “Pneumocard” was developed to further investigate autonomic cardiovascular and respiratory function aboard the ISS. The hard-software diagnostic complex “Pneumocard” was used during in-flight experiment aboard ISS for autonomic function testing. ECG, photoplethysmography, respiration, transthoracic bioimpedance and seismocardiography were assessed in one male cosmonaut (flight lengths six month). Recordings were made prior to the flight, late during flight, and post-flight during spontaneous respiration and controlled respiration at different rates.HR remained stable during flight. The values were comparable to supine measurements on earth. Respiratory frequency and blood pressure decreased during flight. Post flight HR and BP values increased compared to in-flight data exceeding pre-flight values. Cardiac time intervals did not change dramatically during flight. Pulse wave transit time decreased during flight. The maximum of the first time derivative of the impedance cardiogram, which is highly correlated with stroke volume was not reduced in-flight.Our results demonstrate that autonomic function testing aboard the ISS using “Pneumocard” is feasible and generates data of good quality. Despite the decrease in BP, pulse wave transit time was found reduced in space as shown earlier. However, cardiac output did not decrease profoundly in the investigated cosmonaut.Autonomic testing during space flight detects individual changes in cardiovascular control and may add important information to standard medical control. The recent plans to support a flight to Mars, makes these kinds of observations all the more relevant and compelling.     

Low cost planetary exploration: surrey lunar minisatellite and interplanetary platform missions

In order to meet the growing global requirement for affordable missions beyond Low Earth Orbit, two types of platform are under design at the Surrey Space Centre. The first platform is a derivative of Surrey's UoSAT-12 minisatellite, launched in April 1999 and operating successfully in-orbit. The minisatellite has been modified to accommodate a propulsion system capable of delivering up to 1700 m/s delta-V, enabling it to support a wide range of very low cost missions to LaGrange points, Near-Earth Objects, and the Moon. A mission to the Moon - dubbed “MoonShine” - is proposed as the first demonstration of the modified minisatellite beyond LEO. The second platform - Surrey's Interplanetary Platform - has been designed to support missions with delta-V requirements up to 3200 m/s, making it ideal for low cost missions to Mars and Venus, as well as Near Earth Objects (NEOs) and other interplanetary trajectories. Analysis has proved mission feasibility, identifying key challenges in both missions for developing cost-effective techniques for: spacecraft propulsion; navigation; autonomous operations; and a reliable safe mode strategy. To reduce mission risk, inherently failure resistant lunar and interplanetary trajectories are under study. In order to significantly reduce cost and increase reliability, both platforms can communicate with low-cost ground stations and exploit Surrey's experience in autonomous operations. The lunar minisatellite can provide up to 70 kg payload margin in lunar orbit for a total mission cost US$16–25 M. The interplanetary platform can deliver 20 kg of scientific payload to Mars or Venus orbit for a mission cost US$25–50 M. Together, the platforms will enable regular flight of payloads to the Moon and interplanetary space at unprecedented low cost. This paper outlines key systems engineering issues for the proposed Lunar Minisatellite and interplanetary Platform Missions, and describes the accommodation and performance offered to planetary payloads.     

Legal analysis of the International Space Station (ISS) programme using the concept of “legalisation”

NASA, the initiator of the International Space Station (ISS), is currently reinforcing partnerships with the commercial sector as well as other ISS partner states in preparation for the ISS's operation and utilisation. This gives rise to an urgent need to analyse the ISS's legal framework in order to clearly state its legal merits and shortcomings. This essay presents the advantages and disadvantages of the ISS's legal framework by employing the “legalisation”-based approach. These advantages and disadvantages give us clues for selecting the optimal legal arrangement for the future development of the ISS programme. It will therefore be possible to minimise the risks associated with and to generate profits from ISS activities. This will ensure the effective and coherent implementation of the ISS programme.     

Design of meo constellations for galileo: towards a “design to cost” approach

GALILEO aims at involving Europe in a new generation of satellite navigation services. In the context of the phase A of this programme, many system options are still widely open: detailed requirements, constraints and hypotheses are not yet fully stabilised.In order to design a satellite constellation satisfying civil aviation and other users needs in this early stage of the system definition, it is necessary not only to take into account classical performance aspects, such as accuracy and availability of accuracy, but also cost constraints. The paper describes the design and dimensioning method which has led ALCATEL to propose a set of MEO constellations in the frame of the GALILEO project for ESA. It especially places emphasis upon the sensitivity of the system design to numerous parameters as well as its sensitivity to performance requirements.Potential candidate constellations obviously need to meet given performance specifications which are determined by operational aspects such as: satellite reliability, maintenance strategy (spare in orbit, launch on schedule, launch on need), deployment strategy (launcher choice, etc.). The estimated cost of a potential solution is mainly derived from the number of satellites and the deployment/maintenance strategy, but it is representative of the whole life-cycle of the constellation. Furthermore, the exhibited solution shall be “as robust as” possible to requirement or assumption changes. So, it should be a baseline solution that could be easily updated in order to take into account small upgrades.This has led to the performance of some trend analyses to understand the actual influence of some constraints or requirements on the system design, and to see how initial requirements can be efficiently relaxed in order to obtain the maximum system cost diminution for a minimum constraint relaxation. This will be very useful, if cost reduction is necessary, to quickly propose alternative or sub-solutions to the baseline one.     

Project of Ariane 5 LV family advancement by use of reusable fly-back boosters (named “Bargouzine”)

The paper concerns possible concept variants of a partially reusable Heavy-Lift Launch Vehicle derived from the advanced basic launcher (Ariane-2010) by means of substitution of the EAP Solid Rocket Boosters for a Reusable Starting Stage consisting two Liquid-propellant Reusable Fly-Back Boosters called “Bargouzin”.This paper describes the status of the presently studied RFBB concepts during its three phases.The first project phase was dedicated to feasibility expertise of liquid-rocket reusable fly-back boosters (“Baikal” type) utilization for heavy-lift space launch vehicle. The design features and main conclusions are presented.The second phase has been performed with the purpose of selection of preferable concept among the alternative ones for the future Ariane LV modernization by using RFBB instead of EAP Boosters. The main requirements, logic of work, possible configuration and conclusion are presented. Initial aerodynamic, ballistic, thermoloading, dynamic loading, trade-off and comparison analysis have been performed on these concepts.The third phase consists in performing a more detailed expertise of the chosen LV concept. This part summarizes some of the more detailed results related to flight performance, system mass, thermoprotection system, aspects of technologies, ground complex modification, comparison analyses and conclusion.     

Why rover preparatory programmes? The example of the French programme “VAP”

The very first activities concerning planetary rovers began in 1964 in the Soviet Union and in the United States for lunar missions. Nowadays, with the increase of new mission needs and technical possibilities, several space agencies have engaged in some preliminary programmes in that area with the following objectives:

• —to prepare their involvement in future international rover missions

• —to ease contacts/discussions between scientists and engineers

• —to study and develop a new generation of in situ experiments

• —to perform system/mission analysis in conjunction with the definition of the mission objectives

• —to analyze robotic problematics and implement robotic concepts in the rover architectures.

To perform these activities, several organizations have been set up in Russia, the United States, Japan, Italy and France, according to the relative weight of space engineering over robotic research.

In the case of the French programme (‘VAP—Automatic Planetary Rover’), the organization is based on a partnership between the CNES, a scientific committee, four national research laboratories and industries in order to optimize scientific and technical work, with an optimal use of past robotic research studies, as well as to generate spin-offs for Earth applications. Indeed, as a preliminary result, we now have a co-operative agreement with Russia to procure cameras and associated software for the autonomous navigation of the Marsokhod 96 and 2 projects for terrestrial applications of robotic concepts defined within the framework of the VAP programme.     

Development of the RFBB “Bargouzine” concept for Ariane-5 evolution

This paper presents the study of a concept of Ariane-5 evolution by means of replacement of two solid-propellant boosters EAP with two liquid-propellant reusable fly-back boosters (RFBBs) called “Bargouzine”. The main design feature of the reference RFBB is LOX/LH2 propellant, the canard aerodynamic configuration with delta wings and rocket engines derived from Vulcain-2 identical to that of the central core except for the nozzle length. After separation RFBBs return back by use of air breathing engines mounted in the aft part and then landing on a runway.The aim of the study is a more detailed investigation of critical technology issues concerning reliability, re-usability and maintenance requirements. The study was performed in three main phases: system trade-off, technical consolidation, and programmatic synthesis. The system trade-off includes comparative analysis of two systems with three and four engines on each RFBB and determination of the necessary thrust level taking into account thrust reservation for emergency situations. Besides, this phase contains trade-off on booster aerodynamic configurations and abort scenario analysis.The second phase includes studying of controllability during the ascent phase and separation, thermo-mechanical design, development of ground interfaces and attachment means, and turbojets engine analysis taking into account reusability.     

Species and temperature exchange in the atmosphere of “BION-M” spacecraft

On going flights of Foton satellites allow to carry out research in the following domains: effect of space flight and outer space factors such as microgravity, artificial gravity and space radiation on physical processes and biological organisms. Experts from many Russian and foreign scientific institutions participated in the research. Over a period of time from 1973 to 1997 there were launched 11 BION satellites designed by the Central Specialized Design Bureau for carrying out fundamental and applied research in the field of space biology, medicine, radio physics and radiobiology with participation of specialists from the foreign countries.The goal of the present investigation was in developing a numerical simulator aimed at determining gas concentration and temperature fields established inside the scientific module of the spacecraft “Bion-M” and to perform optimization studies, which could meet strong requirements for air quality and temperature range allowable for operation of different biological experiments.     

Orbiting solar telescope on “Salyut-4” station

The orbiting solar telescope on Salyut-4 (F = 2,5 m, d = 250 mm) produces images of the Sun on the entrance slit of a stigmatic two-grating spectrograph (R₁ = 1 m, N₁ = 1200 lines/mm; R₂ = 0.5 m, N₂ = 2400 lines/mm, dispersion 16 Å/mm, spectral resolution 0,3 Å). The automatic system keeps the observed solar features on the slit of the spectrograph with an accuracy of 3–4 arc sec. The far UV-spectra (970–1400 Å) of solar flares, brightenings, flocculi and prominences were photographed and fresh coatings of mirrors were made during the flight.     

MDO approach for early design of aerobraking orbital transfer vehicles

This paper presents a new multidisciplinary design optimization (MDO) methodology for preliminary design of an aeroassisted orbital transfer vehicle (AOTV) performing a two-way transfer between a low-Earth “parking” orbit and a high-energy orbit. This work has been performed in the frame of Onera's CENTOR [N. Bérend, C. Jolly, F. Jouhaud, D. Lazaro, Y. Mauriot, C. Monjaret, J.M. Moschetta, M. Parlier, J.L. Pastre, Y. Servouze, J.L. Vérant, Project CENTOR: Preparing the design of future orbital transfer vehicles; IAC-07-D.2.3.07, in: 58th International Astronautical Congress, 24–28/09/2007, Hyderabad, India] project whose objective is to prepare tools and methodology for studying and designing future space transportation systems for new kinds of missions such as on-orbit servicing (OOS), payload ferrying, or in-situ observation of space-debris. Using simplified models and an appropriate low-dimension formulation for the optimization problem the method makes possible to obtain rapidly and easily a global view of the trade-off between the payload mass and the total mass. It also makes possible to discuss the feasibility of the vehicle with regard to different multidisciplinary constraints and technology hypotheses for the heat shield. This approach is illustrated by eight different AOTV design studies, considering two different missions (LEO–MEO and LEO–GEO), two different propulsion technologies (LOX-LH2 and LOX-CH4) and two different thermal protection system (TPS) characteristics. In each case, we discuss the feasibility and characteristics of the lightest vehicle carrying a prescribed 100 kg payload, and, conversely, a heavy vehicle with a prescribed 18 ton total mass, carrying the heaviest possible payload.     

Characterizing the near-earth object hazard and its mitigation

Within observational constraints and analytic orbit determinations, potential NEO hazards and mitigations are characterized in terms of orbit displacements to establish (arbitrary) “safe” closest approach distances and corresponding energies that must be externally applied to achieve appropriate orbit displacements from the Earth. Required orbital velocity changes depend on projected closest Earth approach distances and time to (near) impact. Energy to achieve orbital displacement depends on NEO mass, required orbital velocity change, and the energy–momentum coupling coefficient. Errors in these parameters introduce uncertainties into hazard index and mitigation procedures. Hazard avoidance levels and mitigation indices for nine near-Earth asteroids, including 1997 XF₁₁ and 1999 AN₁₀, with non-zero Earth-impact probabilities are computed as examples of the proposed methodology, generating insight into the dilemma of predicting near impacts. This zeroth order approximation should not be construed as solving an orbital mechanics problem, nor establishing a particular set of criteria for mitigation action, but rather as a “survival index”.     

New results for the space radiation environment of MIR space station obtained by Liulin dosimeter-radiometer. Comparison with LET spectrometer NAUSICAA

Since 1988 high sensitivity semiconductor dosimeter-radiometer “Liulin” worked on board of MIR space station. Device measured the absorbed dose rate and the flux of penetrating particles. The analysis of the data hows the following new results:

In October 1989 and after March 24, 1991, two additional stable maximums in flux channel were observed in the southern-eastern part of South Atlantic Anomaly (SAA). These two maximums existed at least several months and seem to be due to trapped high energy electron and proton fluxes. In April 1991 additional maximums were localized in the following geographical coordinates regions: LATITUDE = (−35 °)–(−50 °) LONGITUDE = 332 ° − 16 ° and lat.(−46 °)–(−52 °) long. 360 ° − 60 °. Additional maximums diffusion occurs inside radiation belt. Appearance of these maximums seems to be closely connected with preceding powerful solar proton events and associated geomagnetic dynamics of new belt disturbances. After the series of solar proton events in June 1991 we observed significant enhancement of this new radiation belt formation. To achieve sufficient accuracy of dose rate predictions in low Earth orbits the structure and dynamics of new belt should be carefully analyzed to be included in a new environment model.

From the inter comparison of the data from “Liulin” and French developed tissue equivalent LET spectrometer NAUSICAA in the time period August–November 1992 we come to the following conclusions: Mainly there is good agreement between both data sets for absorbed dose in the region of SAA; Different situation of the instruments on the station can explain the cases when differences up to 2 times are observed; At high latitudes usually the tissue equivalent absorbed dose observations are 2 times larger than “Liulin” doses.     

Economics of telecommunications space segments

This paper proposes a complete model for assessing the economics of telecommunications satellite systems, accounting for spacecraft development and manufacturing, launch and operations in orbit. This allows to account for such parameters as the mass and lifetime of the satellites, the number and type of payloads, the number of satellites procured and launched, the spare policy, the launch vehicle, the insurances, the satellite average MTTF and the management of the space segment efforts.

The model is divided into four parts: the spacecraft mass model, the spacecraft procurement cost model, the MTTF model and the space segment cost-effectiveness model. It provides for the rapid solution of a number of problems within a wide range of parameters such as assessing the influence on space segment economics of —certain satellite technologies, —satellite and payload mass, —number of payloads per spacecraft, —satellite lifetime, or —spare policy.