风云三号C星GNOS北斗掩星电离层探测初步结果

利用风云三号卫星C星GNOS掩星探测仪电离层数据,分析了2013年10月FY-3C GNOS探测的北斗掩星电离层廓线分布,将2013年10月1日至2015年10月10日期间FY-3C GNOS观测的F₂层峰值电子密度（N_mF₂）与地面电离层测高仪观测结果进行对比,验证了FY-3C GNOS北斗电离层掩星的探测精度.结果表明,FY3-C GNOS北斗电离层掩星与电离层测高仪探测的N_mF₂数据相关系数为0.96,平均偏差为10.21%,标准差为19.61%.在不同情况下其数据精度有如下特征:白天精度高于夜晚;夏季精度高于分季,分季精度高于冬季;中纬地区精度高于低纬地区,低纬地区精度高于高纬地区; BDS倾斜同步轨道（IGSO）卫星精度高于同步轨道（GEO）卫星和中轨道（MEO）卫星.FY-3C GNOS北斗电离层掩星与国际上其他掩星电离层数据精度的一致性对GNSS掩星探测资料的综合利用具有重大意义.      

北斗卫星导航系统实时定轨与钟差处理策略

目前鲜有对北斗卫星导航系统（BeiDouNavigationSatelliteSystem,BDS）实时精密定轨与钟差确定的研究,文章提出了BDS实时轨道与实时钟差处理策略,包括了观测与动力学模型、实时轨道与实时钟差处理流程与评估方法。尤其对于实时钟差,为了提高计算效率,联合使用两个独立并行的线程估计非差绝对钟差和历元间相对钟差。利用多模全球卫星导航系统试验(MGEX)与全球连续检测评估系统（iGMAS）实测数据进行了北斗实时轨道与钟差解算,BDS实时轨道径向平均精度对于GEO卫星优于20cm,对于IGSO与MEO一般优于10cm;钟差精度对于GEO卫星为0.5~4.5ns,对于IGSO／MEO为0.2~2.0ns。基于目前的轨道与钟差结果,实时精密单点定位（PrecisePointPositioning,PPP）结果可以达到分米量级。     

联合北斗导航与星间链路的大椭圆卫星定轨方法

传统的地面测控和GNSS均无法实现HEO卫星全弧段的跟踪观测.在分析北斗导航信号及其星间链路信号对典型HEO的观测几何及覆盖特性的基础上,利用北斗导航及其星间链路对HEO测控支持形成互补的特点,提出了一种卫星导航与星间链路相结合的自主导航方法.对HEO定轨进行分段划分并基于EKF设计了卫星导航与星间链路数据融合定轨的自主导航算法.分析结果表明,本文提出的方法能够从全弧段上改善HEO的观测几何,定轨精度比仅使用卫星导航提高了2个数量级,并且仅需较少的星间链路资源.      

Autonomous broadcast ephemeris improvement for GNSS using inter-satellite ranging measurements

This paper discusses the concept of using inter-satellite ranging (ISR) measurements of the satellites of a Global Navigation Satellite System (GNSS) for autonomous broadcast ephemeris improvement. Firstly the inter-satellite ranging is modeled to obtain the clock and orbit error observables. The orbit error observable is analyzed and its observation equation is provided. Both least-squares estimation and Kalman Filter approach are proposed to estimate satellite clock errors, while solely the Kalman Filter is used to estimate the orbit errors. All these algorithms are validated using true broadcast ephemeris and precise ephemeris of GPS along with the simulated ranging noise. Based on the settings adopted in the test, the result shows that the orbit accuracy of the precise ephemeris using the proposed method is around 20–50 cm and the accuracy of the satellite clock can reach 20 cm while ranging noise is assumed to be 0.45 m (1σ). The User Ranging Error (URE) is improved from 1.05 m to 0.34 m, which is comparable to other sources of precise ephemeris or even better, while the proposed approach has many advantages such as compatibility and accessibility. It is also noted that the proposed method may provide useful functions in determining inter-constellation coordinate and time differences autonomously for better interoperability and interchangeability in the multi GNSS operation era.     

Satellite availability and positioning performance of uncombined precise point positioning using BeiDou-2 and BeiDou-3 multi-frequency signals

To realize the smooth transition from regional BeiDou Navigation Satellite System (BDS-2) to the global one (BDS-3), the integration of BDS-2 and BDS-3 is important for providing continuous, stable and reliable positioning, navigation and timing (PNT) services for global users. This work used 154 globally distributed multi-GNSS (Global Navigation Satellite System) experiment stations spanning 30 days to analyze the satellite availability and positioning performance of uncombined precise point positioning (UC-PPP) under current BDS-2 and BDS-3 constellations. We focused on three issues: the influence of BDS-3 receiver tracking abilities, the positioning performance among different areas, and the benefit of multi-frequency observations. The results show that the elliptical zone caused by poor BDS-2 satellite visibility is disappeared when the evenly distributed BDS-3 medium earth orbit satellites are introduced. When BDS-3 are integrated with BDS-2, the area with the Position Dilution of Precision (PDOP) less than 2 can be expanded to 75° S-75° N and 30° E-150° W. The positioning performance of BDS-3 and BDS-2/BDS-3 UC-PPP are seriously affected by the receiver tracking abilities of BDS-3 signals. When the maximum pseudo-random noise sequences (PRNs) of BDS-3 satellites tracked by stations are within 30 or 37, the positioning accuracy of static UC-PPP can be improved by 22.94% or 8.27% due to the integration of BDS-2 and BDS-3. Besides, the most improvement of BDS-2 and BDS-3 integration is achieved in Asia-Pacific regions, especially for the kinematic UC-PPP or the poor receiver tracking abilities of BDS-3. Similar to the multi-frequency BDS-2 UC-PPP, the benefit of multi-frequency signals for BDS-3 or BDS-2/BDS-3 UC-PPP is also non-vital. The three-dimensional positioning accuracy of BDS-2/BDS-3 multi-frequency UC-PPP in static mode and kinematic mode are 2.24 cm and 5.39 cm, while the corresponding convergence time are 49.62 min and 73.80 min, respectively. Compared with BDS-2, both the positioning accuracy and the convergence time of BDS-2/BDS-3 joint UC-PPP are improved by approximately over 50%, which indicates that BDS-3 has a great potential to provide high-quality PNT services as other global navigation satellite systems.     

Preliminary analysis of the quality and positioning performance of BDS-3 global interoperable signal B1C&B2a

BeiDou-3 Navigation Satellite System (BDS-3) satellites are equipped with the new generation GNSS signals B1C and B2a, which support the interoperability with GPS and Galileo systems. In this study, the pseudo-range multipath error and carrier phase observation noise of the BDS-3 B1C and B2a signals were evaluated based on zero baseline measurements from the day of year (DOY) 113 to 116, 2020. Further, the precision and performance of the single point positioning (SPP) and precise point positioning (PPP) are assessed at 9 stations. This assessment manifests that the standard deviations (STDs) of the pseudo-range multipath error are about 0.09 ~ 0.22 m, while STDs of the carrier phase observation noise are about 0.075 mm. For the single-frequency SPP, its positioning precision is about 2.03 ~ 4.85 m and 3.29 ~ 10.73 m at the 99.99% confidence level in horizontal and vertical directions, respectively, while the dual-frequency SPP precision is about 1.92 ~ 8.02 m and 4.81 ~ 12.77 m in horizontal and vertical directions, respectively. For the daily static PPP, the convergence time is about 20 ~ 30 min, while the daily positioning precision can reach 1.38 ~ 4.42 cm and -1.31 ~ 4.34 cm in horizontal and vertical directions, respectively. In general, the quality and the SPP and PPP performance of the BDS-3 B1C&B2a signals are comparable to the GPS and Galileo.     

多频GNSS电离层折射误差修正方法CSCD

针对电离层折射误差较大的特点,分别对GPS(Global Positioning System)和BDS(Bei Dou Navigation Satellite System)的单一频率的电离层折射误差进行了分析,并将不同频率进行线性组合,计算出组合后的电离层折射误差。此方法修正了双频一阶项、三频一阶项和三频二阶项电离层折射误差。由于电离层延迟修正的同时会放大观测噪声,为此分析比较了不同频率组合修正后的观测噪声,为最佳频率组合的选取提供了理论方法。     

Performance assessment of real-time orbit determination for the Haiyang-2D using onboard BDS-3/GPS observations

The Global Navigation Satellite System (GNSS) receivers equipped on the Haiyang-2D (HY-2D) satellite is capable of tracking the signals of both the third generation of BeiDou satellite navigation System (BDS-3) and the Global Positioning System (GPS), which make it feasible to assess the performance of real-time orbit determination (RTOD) for the HY-2D using onboard GNSS observations. In this study, the achievable accuracy and convergence time of RTOD for the HY-2D using onboard BDS-3 and GPS observations are analyzed. Benefiting from the binary-offset-carrier (BOC) modulation, the BDS-3 C1X signal includes less noise than the GPS C1C signal, which has the same signal frequency and chipping rate. The root mean squares (RMS) of the noises of C1X and C1C code measurements are 0.579 m and 1.636 m, respectively. Thanks to a ten-times higher chipping rate, the code measurements of BDS-3 C5P, GPS C1W and C2W are less noisy. The RMS of code noises of BDS-3 C5P, GPS C1W, and C2W are 0.044 m, 0.386 m, and 0.272 m, respectively. For the HY-2D orbit, the three-dimensional (3D) and radial accuracies can reach 31.8 cm and 7.5 cm with only BDS-3 observations, around 50 % better than the corresponding accuracies with GPS. Better performance of the BDS-3 in RTOD for the HY-2D is attributed to the high quality of its broadcast ephemeris. When random parameters are used to absorb ephemeris errors, substantial improvement is seen in the accuracy of HY-2D orbit with either BDS-3 or GPS. The 3D RMS of HY-2D orbit errors with BDS-3 and GPS are enhanced to 23.1 cm and 33.6 cm, and the RMS of the radial components are improved to 6.1 cm and 13.3 cm, respectively. The convergence time is 41.6 and 75.5 min for the RTOD with BDS-3 and GPS, while it is reduced to 39.2 and 27.4 min after the broadcast ephemeris errors are absorbed by random parameters. Overall, the achievable accuracy of RTOD with BDS-3 reaches decimeter level, which is even better than that with GPS, making real-time navigation using onboard BDS-3 observations a feasible choice for future remote sensing missions.     

Precise orbit determination and baseline consistency assessment for Swarm constellation

Precise orbit determination (POD) and precise baseline determination (PBD) of Swarm satellites with 4 years of data are investigated. Ambiguity resolution (AR) plays a crucial role in achieving the best orbit accuracy. Swarm POD and PBD based on single difference (SD) AR and traditional double difference (DD) AR methods are explored separately. Swarm antenna phase center variation (PCV) corrections are developed to further improve the orbit determination accuracy. The code multipath of C1C, C1W and C2W observations is first evaluated and clear variations in code noise related to different receiver settings are observed. Carrier phase residuals of different time periods and different loop tracking settings of receiver are studied to explore the effect of ionospheric scintillation on POD. The reduction of residuals in the polar and geomagnetic equator regions confirms the positive impact of the updated carrier tracking loops (TLs) on POD performance. The SD AR orbits and orbits with float ambiguity (FA) are compared with the Swarm precise science orbits (PSOs). An average improvement of 27 %, 4 % and 16 % is gained in along-track, cross-track and radial directions by fixing the ambiguity to integer. For Swarm-A/B and Swarm-B/C formations, specific days are selected to perform the DD AR-based POD during which the average distance of the formation satellites is less than 5000 km. Satellite laser ranging (SLR) observations are employed to validate the performance of FA, SD AR and DD AR orbits. The consistency between the SD AR orbits and SLR data is at a level of 10 mm which shows an improvement of 25 % when comparing with the FA results. An SLR residuals reduction of 15 % is also achieved by the DD AR solution for the selected days. Precise relative navigation is also an essential aspect for spacecraft formation flying missions. The closure error method is proposed to evaluate the baseline precision in three dimensions. A baseline precision of 1–3 mm for Swarm-A/C formation and 3–5 mm for Swarm-A/B and Swarm-B/C satellite pairs is verified by both the consistency check and closure error method.     

Inertial aided BDS triple-frequency integer ambiguity rounding method

The integer ambiguity resolution (AR) of carrier phase is significant for Global Navigation Satellite System (GNSS) precise positioning. However, in kinematic case, single-epoch AR methods based on alone GNSS are usually not reliable due to the instable pseudorange accuracy. Moreover, the computation of classical AR method Least Squares Ambiguity Decorrelation Adjustment (LAMBDA) is large. Thus, the inertial measurement unit (IMU) is introduced, a new inertial-aided AR method that directly rounds the float ambiguity of BeiDou triple-frequency combined observations, which is characterized by long wavelength, low carrier-phase noise and ionospheric delay, is proposed. The mathematical model of the new method is derived first. Then the impacts of the carrier-phase noise, ionospheric delay and inertial navigation system (INS) position error on the AR success ratio of combined observation are analyzed through probabilistic approach. Based on above investigation, the combinations (0, ?1, 1), (1, 4, ?5) and (4, ?2, ?3) are selected to resolve the original ambiguity. A vehicular integrated navigation test is performed to demonstrate the proposed method. The results show that the average AR success ratios of the three selected combinations, whose float ambiguity errors are 0.041, 0.146, 0.279 cycle respectively, are above 97.25% without regard to low-elevation C05. With respect to positioning accuracy based on our AR method when compared with IE software, the east, north, up error RMS of position are 0.042, 0.024, 0.069 m, respectively. In terms of the AR recover after the BeiDou signals outage, as long as 62 s BeiDou signal complete outage, all the ambiguities of all satellites could be re-fixed immediately. Besides, during the 90 s signals partial outage, the AR is not influenced by the position error, since the float ambiguity errors are all below half-cycle. The research of this contribution demonstrates the effectiveness of the proposed new method, which indicates it is applicable to kinematic positioning, even in BDS degraded and denied environments.     

Fast calibration of between-receiver GPS/Galileo/BDS differential phase bias with millimeter accuracy based on short baseline mode

The differential code and phase biases induced by the receiver hardware (including receiver, antenna, firmware, etc.) of the Global Navigation Satellite System (GNSS) have significant effects on precise timing and ionosphere sensing, thus deserve careful treatment. In this contribution, we propose an approach to fast fix the single-difference ambiguity to finally obtain the unbiased estimates of between-receiver differential phase bias (BR-DPB) and between-receiver differential code-phase bias (BR-DCPB) based on the short baseline mode. The key to this method is that the error sources can be significantly eliminated due to the length of the baseline is very short. At the same time, the empirical constraints and random characteristics of BR-DPB/BR-DCPB were considered, which is conducive to the resolution of single-difference ambiguity. Several sets of GNSS data (GPS L1/L2, Galileo E1/E5b, and BDS B1/B3), recorded by the short baselines in an interval of 30 s and covered a broad range of receiver/antenna types (JAVA, SEPT, LEIC, and TRIM), were used to verify the effectiveness of the proposed method. The numerical tests show that the proposed method is capable of fast fixing the single-difference ambiguity successfully within a few epochs and then providing the unbiased estimates of BR-DPB and BR-DCPB in an epoch-by-epoch manner. Experiments show that the estimated BR-DPB is in millimeter accuracy, which is of great significance for the millimeter-accuracy phase time transfer and ionospheric delay estimation. Furthermore, the calibrated BR-DPB/BR-DCPB can be treated as the known products for long-distance precise timing and ionosphere sensing based on the inter-station single-difference model.     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

北斗首颗备份卫星性能初步分析

主要从卫星钟差预报、轨道测定精度、伪距波动情况等角度分析了I6卫星与北斗卫星导航系统（BDS）其他现役倾斜地球同步轨道（IGSO）卫星的异同,并从位置精度因子（PDOP）和格网可用性评估了I6卫星入网对BDS的贡献。利用星地双向时频传递设备观测的星地钟差数据,评估了I6卫星星载原子钟的预报性能,结果表明,I6卫星发播的卫星钟参数外推5h预报误差的均方根误差（RMS）为232ns,外推1h预报误差的RMS为073ns,与现役IGSO卫星钟差预报水平相当;对多星联合精密定轨结果分析表明,与北斗现役I3卫星相比,姿态控制方式优化后的I6卫星在地影期间的轨道精度并未发生明显衰减,克服了现有北斗二号卫星在地影期间轨道精度下降,从而影响北斗服务的连续性、可用性问题;利用大口径抛物面天线采集到的数据对I6卫星的伪距波动进行了分析,结果表明I6卫星单个观测弧段内其伪距波动峰峰差约为1m,与其他IGSO卫星一致;进行PDOP仿真计算,结果表明I6卫星的加入使得喀什地区的PDOP最大值由1282下降为726,PDOP大于6的时段所占百分比由2911%下降为1721%;对格网电离层产品实施解算,结果表明I6卫星的加入使得6个电离层格网点的可用度提升至95%以上。     

Analysis of BDS-3 distributed autonomous navigation based on BeiDou system simulation platform

Satellite autonomous navigation is an important function of the BeiDou-3 navigation System (BDS-3). Satellite autonomous navigation means that the navigation satellite uses long-term forecast ephemeris and Inter-Satellite Link (ISL) measurements to determinate its own spatial position and time reference without the support of the ground Operation and Control System (OCS) for a long time to ensure that the navigation system can normally maintain the time and space reference. This paper aims to analyze the feasibility of distributed autonomous navigation algorithms. For the first time, a ground parallel autonomous navigation test system (GPANTS) is built. The performance of distributed autonomous navigation is then analyzed using the two-way ISL ranging of BDS-3 satellites. First, the BDS simulation platform and the GPANTS are introduced. Then, the basic principles of distributed satellite autonomous orbit determination and time synchronization based on ISL measurements are summarized. Preliminary evaluation of the performance of the BDS-3 constellation autonomous navigation service under ideal conditions through simulation data. Then the performance of autonomous navigation for 22 BeiDou-3 satellites using ISL measurements is evaluated. The results show that when satellites operate autonomously for 50 days without the support of any ground station, the User Range Error (URE) of autonomous orbit determination is better than 3 m, and the time synchronization accuracy is better than 4 ns.     

Ionosphere modelling for Galileo single frequency users: Illustration of the combination of the NeQuick model and GNSS data ingestion

The ionospheric effect remains one of the main factors limiting the accuracy of Global Navigation Satellite Systems (GNSS) including Galileo. For single frequency users, this contribution to the error budget will be mitigated by an algorithm based on the NeQuick global ionospheric model. This quick-run empirical model provides flexible solutions for combining ionospheric information obtained from various sources, from GNSS to ionosondes and topside sounders. Hence it constitutes an interesting simulation tool not only serving Galileo needs for mitigation of the ionospheric effect but also widening the use of new data.     

Comprehensive performance review of BDS-3 after one-year official operation

On July 31, 2020, the third generation BeiDou Global Satellite Navigation System (BDS-3) was officially put into service. Here we first reviewed the development history of BDS-3, and described the status of BDS-3 constellation, satellite signals, and ground tracking network. Then we expounded the 10 innovations in which BDS-3 differs from the other global satellite navigation systems. In addition, the latest service performance status of BDS-3 was displayed from a comprehensive perspective. The performance of BDS-3 was analyzed and evaluated from five aspects: constellation performance, observation data quality, spatial signal performance, PNT (Positioning, Navigation, and Timing) service performance, and precision positioning application. We used 14 indices to conduct comprehensive assessment of the BDS-3 service performance. Finally, the main direction of the next development of BDS was prospected.     

Introduction to global short message communication service of BeiDou-3 navigation satellite system

Short Message Communication (SMC) is a featured service of BeiDou Navigation Satellite System (BDS). After its successful deployment in 2003, Regional Short Message Communication (RSMC) service has been continuously serving China and its neighboring countries and regions, especially in life safety scenarios. In this paper, the architecture of the Global Short Message Communication (GSMC) system is proposed based on the medium earth orbit (MEO) constellation and the crosslinks of the global BeiDou navigation system (BDS-3). Three subtypes of GSMC service, i.e. positioning report, emergency search and rescue (SAR) and regular SMC are designed in accordance with the technical characteristic of integration of navigation and communication in BDS-3, which supports future wide applications of GSMC. The performance of the designed GSMC system is analyzed by numerical calculations. As BDS-3 was officially announced completion on July 31, 2020, GSMC has been providing initial service. First test results of the in orbit GSMC payloads are also presented in the paper to verify the designed capabilities. Preliminary results also show that the requirements of Global Maritime Distress and Safety System (GMDSS) can also be fulfilled.     

BDS-2/BDS-3 uncalibrated phase delay estimation considering the intra-system bias

Intra-system biases (ISBs) between BDS-2 and BDS-3 are of critical importance when combining observations from the BDS-2 and BDS-3 systems, which is meaningful to fully take advantage of the BDS positioning capability. Meanwhile, ISBs should also be considered in the estimation of BDS uncalibrated phase delays (UPDs). In this research, we present a BDS-2/BDS-3 joint-processing scheme, as well as a method for estimating BDS UPDs. The characteristics of ISBs and the quality of BDS UPDs are analyzed based on 30-day data from 130 multi-GNSS experimental (MGEX) stations. Our results indicate that the ISBs are related to the type and version of the receiver. The ISBs can be regarded as constant across the course of a given day, and the mean standard deviation (STD) values of ISBs over one month for different types of receivers are generally within 0.2 m. Moreover, to assess the quality of UPD products, the residuals of the estimated UPDs and the utilization rates of the observation data are computed. The results show that the quality of BDS UPDs can be improved by correcting the satellite-induced pseudo-range variations, and by estimating the wide-lane (WL) UPD difference between BDS-2 and BDS-3. The average RMS values of the estimated residuals of WL UPD and narrow-lane (NL) UPD are 0.07 and 0.09 cycles, respectively; moreover, the utilization rate of the observation data of WL UPD and NL UPD can reach above 90 %. The performance of BDS precise point positioning (PPP) and PPP ambiguity resolution (PPP-AR) is analyzed in terms of positioning accuracy and convergence performance in both the static and kinematic modes. Compared with PPP ambiguity-float solutions, the positioning accuracy of PPP-AR is significantly improved, especially in the east direction. The impact of ISBs on PPP and PPP-AR is also analyzed, and the results indicate that ISBs can improve the convergence speed of float PPP, but can be disregarded in PPP-AR.     

45°(N)纬度带的Klobuchar like电离层延迟季节修正模型与评估

电离层延迟是全球卫星导航系统（GNSS）的主要误差源之一。对于装配GNSS单频接收机的航空器,选择简单有效的Klobuchar广播电离层模型来改正电离层延迟误差,其修正率为50%～60%。针对45°（N）纬度带,提出了更高电离层修正需求。考虑到季节因素对中高纬度地区电离层的显著影响,利用GIMs（Global Ionospheric Maps）分析了昼夜中TEC（Total Electron Content）的峰值和谷值随季节（年积日）的变化,建立了一种适用于45°（N）纬度带的Klobuchar like电离层模型。该模型不增加广播模型系数,新模型的夜间和VTEC高峰时电离层修正率分别达到了82%和80%,表明在穿刺点集中的45°(N)纬度地区使用该模型可以更精确地描述该地区的电离层,帮助航空器实现更高精度的定位。     

Mitigation of receiver biases in ionospheric observables from PPP with ambiguity resolution

PPP (Precise Point Positioning) is a GNSS (Global Navigation Satellite Systems) positioning method that requires SSR (State Space Representation) corrections in order to provide solutions with an accuracy of centimetric level. The so-called RT-PPP (Real-time PPP) is possible thanks to real-time precise SSR products, for orbits and clocks, provided by IGS (International GNSS Service) and its associate analysis centers such as CNES (Centre National d'Etudes Spatiales). CNES SSR products also enable RT-PPP with integer ambiguity resolution. In GNSS related literature, PPP with ambiguity resolution (PPP-AR) in real-time is often referred as PPP-RTK (PPP – Real Time Kinematic). PPP-WIZARD (PPP - With Integer and Zero-difference Ambiguity Resolution Demonstrator) is a software that is made available by CNES. This software is capable of performing PPP-RTK. It estimates slant ionospheric delays and other GNSS positioning parameters. Since ionospheric effects are spatially correlated by GNSS data from active networks, it is possible to model and provide ionospheric delays for any position in the network coverage area. The prior knowledge ionospheric delays can reduce positioning convergence for PPP-RTK users. Real-time ionospheric models could benefit from highly precise ionospheric delays estimated in PPP-AR. In this study, we demonstrate that ionospheric delays obtained throughout PPP-AR estimation are actu ally ionospheric observables. Ionospheric observables are biased by an order of few meters caused by the receiver hardware biases. These biases prohibit the use of PPP-WIZARD ionospheric delays to produce ionospheric models. Receiver biases correction is essential to provide ionospheric delays while using PPP-AR based ionospheric observables. In this contribution, a method was implemented to estimate and mitigate receiver hardware biases influence on slant ionospheric observables from PPP-AR. In order to assess the proposed approach, PPP-AR data from 12 GNSS stations were processed over a two-month period (March and April 2018). A comparison between IGS ionospheric products and PPP-AR based ionospheric observables corrected for receiver biases, resulted in a mean of differences of −39 cm and 51 cm standard deviation. The results are consistent with the accuracy of the IGS ionospheric products, 2–8 TECU, considering that 1 TECU is ~16 cm in L1. In another analysis, a comparison of ionospheric delays from 5 pairs of short baselines GNSS stations found an agreement of 0.001 m in mean differences with 22 cm standard deviation after receiver biases were corrected. Therefore, the proposed solution is promising and could produce high quality (1–2 TECU) slant ionospheric delays. This product can be used in a large variety of modeling approaches, since ionospheric delays after correction are unbiased. These results indicate that the proposed strategy is promising, and could benefit applications that require accuracy of 1–2 TECU (~16–32 cm in L1).